Hypro 1410-0056, Slinger Gasket Shaft Replacement for 9202C/S, 9262C-C/S-C/S-CR

Major Rebuild Kit for Sherwood G-908 This kit contains the following items   HP 1410-0056 1 SLINGER GASKET SHAFT SH 10195 1 SCREW SH 12211 2 BALL BEARING SH 12231 1 O'RING SH 12710 3 LOCKWASHER SH 12855 1 GASKET SH 12859 1 SEAL/SEAT ASSEMBLY SH 13777 1 KEY FOR G-906/907 SH 17485 3 SCREW SH 18663 1 CAM SH 18806 1 SEAL SH 25150 1 WEAR PLATE SH 4258 3 SNAP RING (SMALL) SH 4259 1 SNAP RING (LARGE) SH 4264 1 WASHER SH 9000K 1 IMPELLER KIT WB 302678 1 MTG GASKET F/G 903 G   Kits are put together at time of order

Major Rebuild Kit for Sherwood G-903 This kit contains the following items   HP 1410-0056 1 SLINGER GASKET SHAFT SH 10195 1 SCREW SH 12211 2 BALL BEARING SH 12231 1 O'RING SH 12710 3 LOCKWASHER SH 12855 1 GASKET SH 12859 1 SEAL/SEAT ASSEMBLY SH 13777 1 KEY FOR G-906/907 SH 17485 3 SCREW SH 18663 1 CAM SH 18806 1 SEAL SH 25150 1 WEAR PLATE SH 4258 3 SNAP RING (SMALL) SH 4259 1 SNAP RING (LARGE) SH 4264 1 WASHER SH 9000K 1 IMPELLER KIT WB 302678 1 MTG GASKET F/G 903 G     Kits are put together at time of order

Hypro 0510-2500 Shaft Shaft for Hypro Series 9300 & 9910 Diaphragm Pump (HM3C) Shaft (HM2C & HM4C) 6-3/4” Long

Hypro 5501-5321, Shaft Sub-Assy

Hypro 3350-0056A, 1/2" Polypropylene Line Strainer 10 Bar max pressure @ 21°C  7 Bar max pressure @ 51°C  20 mesh - 871 microns  1/2" female thread ports  Nylon body & bowl  AISI304 st.steel filter screen

Hypro 5500-5325, 5/8" Hollow Shaft Complete Assembly Replacement for: 5325C-H Models Kit includes one each of the following parts: Shaft with Cam Bearing Set Screws for Hollow Shaft Grease Fitting Assembly  Spline Key  Bearing Shield  Main Bearing (Ball Bearing) Bearing Retainer Ring (Shaft) 

Hypro RB114100 1 1/4 Mnpt X 1 Fnpt Nylbsh

Hypro 1320-0076, Roller Pump Kit PTO Adapter Roller Pump Kit Features Hypro 1320-0076 Shaft Adapter 1-3/8" ( 6 splines) PTO US, 34.9mm (6 splines) PTO Metric 5/16" Pump End US, 23.8mm Pump End Metric Forged Steel Material 540 RPM 1500, 1700, 7560, 7700 Pump Model

STA-RITE 17351-0009 SLINGER, PUMP SHAFT 1/16"

Hypro 4101Xl-H, Roller Pump   Performance Information   Max. flow: 7 gpm/26.5 lpm at 2600 rpm Max. pressure: continuous 100 psi/6.9 bar Max. pressure: intermittent 150 psi/10.3 bar Max. rated speed: 2600 rpm   Other Attributes   Rollers: Super Rollers standard (Poly, Teflon and Buna-N available) Housing: Cast Iron, Ni-Resist or Silvercast Port size: 3⁄4" NPT Shaft size: 5⁄8" Solid Pump shaft rotation: CW Shaft Seals: Viton standard (Buna-N available) Available shaft adapters Rotor: Cast Iron, Ni-Resist or Silvercast Standard rotation directly couples to gasoline engines Special torque arm and base kit is available for gas engines

Hypro 6500C, Roller Pump with Nylon Rollers   This 6-roller pump is made of cast iron (including the housing, rotor, and pump body with side ports), so it can easily handle most harsh chemicals. This pump is not recommended for nitrogen or fertilizer. It features a 5/8" solid shaft, 3/4" ports, and a counter clockwise rotation. Its rotary design is built to last; it has a dependable design with no check valves, less friction, and a lower starting torque than its competitors.    The Hypro 6500C Roller Water Pump runs when the PTO or engine moves the pump shaft. The liquid enters into the unit, which causes the rotor and shaft assembly to turn. Then the rollers expel the fluid through the pump housing and nozzle. This Hypro 6-roller pump has a maximum flow rate of 22 GPM at 1200 RPM.    This hydraulic pump unit has a 3/4" port and Viton shaft seals. A 1" hose barb is included with your purchase.   Specifications   Hypro 6500C Roller Water Pump 6 roller pump Maximum flow rate of 22 GPM at 1200 RPM 5/8" solid shaft 3/4 inch port, 1" hose barb, and Viton shaft seals Quick coupler not included: Use ASC# 27305 Duel speed coupler 540/1000 RPM

Hypro 4101XL-E2H Silvercast 12 Volt Electric 4-Roller Pump Pump Series4101 12 volt DC 4-Roller Power TypeElectric Gasket MaterialViton Inlet3/4" NPT Outlet3/4" NPT Shaft1/2" hollow stainless steel Shaft RotationClockwise Maximum (RPM)1600 Maximum Flow Rate (GPM)5.9 Maximum Pressure (PSI)90

Hypro 1700-0045, Gasket Viton Hypro Nylon Line Strainers with 1/2" and 3/4" threads.

Hypro 6500C-T2, Roller Pump Ci Teflon Roller   Port size: 3/4" NPT 1" hose barb inlet fitting for 1000 RPM operation Max Fluid Temp: 140°F Housing: Cast Iron Pump shaft rotation: CCW (CW available) Rollers: Teflon Shaft seals: Viton standard Available PTO adapters: see pg 67 of the Hypro Catalog for more information Recommended PTO torque arm kit 3430-0540 Rotor: Cast Iron   Details: Max GPM: 21.8 Max PSI: 300 Max RPM: 1200 Shaft Output: 5/8" solid shaft