Hypro 1005-0004, Super Roller for 7560 Series

Hypro 1005-0005, Super Roller for 1502 Series  

Hypro 1002-0002, Super Roller for 4000 Series Pumps 1002-0002 Super Roller

Hypro 7560C, Roller Pump Ci Nyln Rollers   This HYPRO® 8-roller pump has a maximum pressure of 300 PSI. It can continuously operate at 100 PSI with a maximum flow rate of 12 GPM at 540 RPM. It can also operate at 22.5 GPM at 1000 RPM.    This hydraulic pump unit ships with a 3/4" NPT female with Super Rollers and Viton shaft seals.    Specifications   HYPRO® 7560C Roller Water Pump 8 roller water pump Maximum flow rate 22.5 GPM at 1000 RPM Maximum 1000 RPM 15/16" solid shaft 3/4" NPT inlet Continuous operation 100 at PSI and intermittent operation at 300 PSI Quick coupler not included: Use ASC# 25131 for 540 RPM and ASC# 25132 for 1000 RPM

Hypro 6500C, Roller Pump with Nylon Rollers   This 6-roller pump is made of cast iron (including the housing, rotor, and pump body with side ports), so it can easily handle most harsh chemicals. This pump is not recommended for nitrogen or fertilizer. It features a 5/8" solid shaft, 3/4" ports, and a counter clockwise rotation. Its rotary design is built to last; it has a dependable design with no check valves, less friction, and a lower starting torque than its competitors.    The Hypro 6500C Roller Water Pump runs when the PTO or engine moves the pump shaft. The liquid enters into the unit, which causes the rotor and shaft assembly to turn. Then the rollers expel the fluid through the pump housing and nozzle. This Hypro 6-roller pump has a maximum flow rate of 22 GPM at 1200 RPM.    This hydraulic pump unit has a 3/4" port and Viton shaft seals. A 1" hose barb is included with your purchase.   Specifications   Hypro 6500C Roller Water Pump 6 roller pump Maximum flow rate of 22 GPM at 1200 RPM 5/8" solid shaft 3/4 inch port, 1" hose barb, and Viton shaft seals Quick coupler not included: Use ASC# 27305 Duel speed coupler 540/1000 RPM

Hypro 6500N, Roller Pump   Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids.   The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps.    Features: Max flow: 22 gpm Max pressure: 300 psi Max speed: 1200 rpm Port sizes: 3/4" NPT  Pump shaft rotation: CCW 5/8" solid stainless steel shaft   Additional Features: 9.7 gpm/36.7 lpm at 540 rpm 18.2 gpm/68.9 lpm at 1000 rpm 21.8 gpm/82.5 lpm at 1200 rpm

Hypro 6500XL, Roller Pump   Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids.   The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps. Ready for use with Roundup®.   Features: Max flow: 22 gpm Max pressure: 300 psi Max speed: 1200 rpm Port sizes: 3/4" NPT  Pump shaft rotation: CCW 5/8" solid stainless steel shaft   Additional Features: 9.7 gpm/36.7 lpm at 540 rpm 18.2 gpm/68.9 lpm at 1000 rpm 21.8 gpm/82.5 lpm at 1200 rpm

Hypro 7700C, Roller Pump   Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids.   The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps.    Features: Max flow: 22.1 gpm Max pressure: 200 psi Max speed: 800 rpm Port sizes: 3/4" NPT  Pump shaft rotation: CCW 15/16" solid stainless steel shaft   Additional Features: 14.2 gpm/53.7 lpm at 540 rpm 22.1 gpm/83.6 lpm at 800 rpm

Hypro 4001C Roller Pump 9 Gpm Ci

Hypro 3430-0381,Kit For 7560   Repair kit is for the following pumps:   7560C, 7560N, 7560XL   3430-0381 Repair Kit Includes:   Qty 8 1005-0004 Super Rollers   Qty 1 1720-0014 O-Ring Gasket for Endplate   Qty 2 2112-0003 Viton Seal

Hypro 7560N-R, Roller Pump Ni-Resist Rev   Ni-Resist 8-Roller Pump w/ Super Rollers, Super Rotor, Viton Seals, 20.1 GPM, 300PSI, 1000RPM, 3/4" NPT, 15/16" Shaft   Performance Information   Max. flow: 12 gpm/45.4 lpm at 540 rpm Max. flow: 22.5 gpm/85.2 lpm at 1000 rpm Max. pressure: continuous 100 psi/6.9 bar Max. pressure: intermittent 300 psi/20.7 bar Max. rated speed: 1000 rpm Max. fluid temperature: 140°F/60°C Other Attributes   Rollers: Super Rollers standard (Poly, Teflon and Buna-N available) Housing: Cast Iron, Ni-Resist or Silvercast Port sizes: 3⁄4" NPT Shaft: 15⁄16" solid Shaft rotation: CW 1" hose barb inlet fitting for 1000 rpm operation Shaft Seals: Viton standard (Buna-N available) Available PTO adapters Rotor: Cast Iron, Ni-Resist and Silvercast Recommended PTO torque arm kit 3430-0540

Hypro 4101Xl-H, Roller Pump   Performance Information   Max. flow: 7 gpm/26.5 lpm at 2600 rpm Max. pressure: continuous 100 psi/6.9 bar Max. pressure: intermittent 150 psi/10.3 bar Max. rated speed: 2600 rpm   Other Attributes   Rollers: Super Rollers standard (Poly, Teflon and Buna-N available) Housing: Cast Iron, Ni-Resist or Silvercast Port size: 3⁄4" NPT Shaft size: 5⁄8" Solid Pump shaft rotation: CW Shaft Seals: Viton standard (Buna-N available) Available shaft adapters Rotor: Cast Iron, Ni-Resist or Silvercast Standard rotation directly couples to gasoline engines Special torque arm and base kit is available for gas engines

Hypro 6500N-R, Roller Pump Ni-Resiet Rev   Hypro 6500N-R 6-Roller Pump, REVERSED, With Ni-Cast Case, Super Rollers, Viton Seals, 3/4" NPT Ports, Solid 5/8" Shaft.  Great for pest control applications.   HYPRO NI-RESIST Roller Pump. High volume and pressure. For livestock spraying, fertilizer application, weed and pest control. Spray wettable powders and chemicals. CCW (reverse by disassembling and reversing rotor in housing). NI-RESIST for more corrosive chemicals. NI-RESIST features high nickle content to give longer life.   Performance Information   • Max. flow:- 9.7 gpm/36.7 lpm at 540 rpm- 18.2 gpm/68.9 lpm at 1000 rpm- 21.8 gpm/82.5 lpm at 1200 rpm • Max. pressure:- Continuous 100-150 psi/6.9-10.3 bar- Intermittent 300 psi/20.7 bar • Max. rated speed: 1200 rpm • Max. fluid temperature: 140°F/60°C

Hypro 3430-0390, Kit For 4000   4001C, 4001N, 4001XL, 4101C, 4101N, 4101XL   3430-0390 Repair Kit Includes:   Qty 4 1005-0002 Super Rollers   Qty 1 1720-0104 O-Ring Gasket for Endplate   Qty 2 2107-0002 Viton Seal

Hypro 7560N Pump Assy Ni-Resist 8-Roller Pump w/ Super Rollers, Super Rotor, Viton Seals, 20.1 GPM, 300PSI, 1000RPM, 3/4" NPT, 15/16" Shaft   Performance Information   Max. flow: 12 gpm/45.4 lpm at 540 rpm Max. flow: 22.5 gpm/85.2 lpm at 1000 rpm Max. pressure: continuous 100 psi/6.9 bar Max. pressure: intermittent 300 psi/20.7 bar Max. rated speed: 1000 rpm Max. fluid temperature: 140°F/60°C Other Attributes   Rollers: Super Rollers standard (Poly, Teflon and Buna-N available) Housing: Cast Iron, Ni-Resist or Silvercast Port sizes: 3⁄4" NPT Shaft: 15⁄16" solid Shaft rotation: CW 1" hose barb inlet fitting for 1000 rpm operation Shaft Seals: Viton standard (Buna-N available) Available PTO adapters Rotor: Cast Iron, Ni-Resist and Silvercast Recommended PTO torque arm kit 3430-0540