Hydra-Cell 2003-NF-AA-P2 Vector Natural Rubber Hose Pump

Hydra-Cell D15EKBTHFEHA 15.5Gpm/1750/2500Psi Pump Diaphragm Pump Features Versatile, Reliable Pumps for a Wide Range of Applications   Maximum Flow Rate: 15.5 gpm (58.7 l/min)   Maximum Pressure: 2500 psi (172 bar) for Metallic Pump Heads   Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the pump to handle abrasives and particulates that might damage or destroy other types of pumps. Simple, compact design reduces initial investment and lowers maintenance costs. Operational efficiencies reduce energy costs. Able to run dry without damage (or additional maintenance) to the pump in case of accident or operator error. Tolerates non-ideal operating conditions. Minimizes maintenance and downtime because there are no seals, packing or cups to leak or replace.   This unit ships by Truck  

Hydra-Cell D10XKSESNEHC 8 Gpm SST/Epdm Pump Maximum Operating Temperature Metallic Heads: 121 ̊C (250 ̊F) - Consult factory for correct component selection for temperatures from 71 ̊C (160 ̊F) to 121 ̊C (250 ̊F). Non-metallic Heads: 60 ̊C (140 ̊F) Maximum Solids Size: 500 microns Inlet Port: 1 inch BSPT 1 inch NPT 150lb ANSI RF flange Discharge Port: 3/4 inch BSPT 3/4 inch NPT 600lb ANSI RF flange Shaft Diameter: 22.2 mm (7/8 inch) Shaft Rotation: Reverse (bi-directional) Bearings: Tapered roller bearings Oil Capacity:1.05 liters (1.1 US quarts)

Hydra-Cell 2005-108-2329 Vector Hose

Hydra-Cell H25-037-2110 O'Ring Buna The Wanner Engineering H25-037-2110 is a O-ring for the housing of Hydra-Cell G-25 and H-25 pumps. Made with Buna for its strength and resistance to harsh chemicals. A genuine OEM Wanner Engineering part. Manufacturer factory parts ensure a proper fit and material compatibility. Specifications: OEM Manufacturer: Wanner Engineering Item: O-Ring Material: Buna Weight: 0.50 lbs. Compatible Hydra-Cell Pumps: G-25 H-25

Hydra-Cell K10-014-1210 Piston Assy Kel-Cell Kel-Cell Piston This is a replacement piston for industrial pumps. Designed for use with Hydra-Cell D10 and G10 Series pumps. Includes D10 pumps with metallic heads. Genuine OEM replacement part from Hydra-Cell. Specifications: For use with Hydra-Cell D10 (Metallic Head) and G10 Series Pumps  

Hydra-Cell 2005-005-1001 Vector Roller Assy

Hydra-Cell H25-031-2112 Oil Seal Buna The Wanner Engineering H25-031-2112 is a new seal for G-25 and H-25 pumps. Made with Buna for it's chemical resistant properties. This ring measures 1 1/8 inch in diameter. A genuine OEM part from Wanner. Specifications: OEM Manufacturer: Wanner Engineering Item: Seal Material: Buna Size: 1 1/8 Inch Compatible Pumps: G-25 H-25

Hydra-Cell D10K52THFEC Kit High Flow Fluid End Service Kit Complete fluid end kit for Wanner Hydra-Cell D10 pumps. Contains replacement valves and diaphragms for full service of pumps. OEM pump servicing kit reduces cost by allowing you to repair and maintain your own pump, and features manufacturer support! Kit Includes: Threadlock  D10-018-2320 - Buna-N diaphragm (3)  D10-047-2110 - Follower O-ring (3) D10-074-2110 - Outer Manifold O-ring (1) D10-073-2110 - Inner Manifold O-ring (1) D10-083-2110 - Center Bolt O-ring (1) D10-035-2110 - Valve Seat O-ring (6) D10-020-1010 - Stainless Steel Valve Seat (6) D10-021-1015 - Stainless Steel Valve (6) D10-022-3117 - Valve Spring (6) D10-023-2310 - Celcon Valve Spring Retainer (6) D10-092-2110 - Buna-N Tetra Seal (6)

Hydra-Cell K10-002-1020 Cylinder Use this part to replace broken or damaged cylinder housings in Hydra-Cell industrial pumps. Designed for D10 and G10 industrial pumps. Hydra-Cell official OEM part.

Hydra-Cell D25K52THFEC Repair Kit Buna Mech Seal Fluid End Service Kit Complete fluid end kit for Wanner Hydra-Cell D10 pumps. Contains replacement valves and diaphragms for full service of pumps. OEM pump servicing kit reduces cost by allowing you to repair and maintain your own pump, and features manufacturer support! Kit Includes: Threadlocker  D25-018-2320 - Buna-N diaphragm (3)  D25-047-2110 - Follower O-ring (3) D25-074-2110 - Outlet Valve O-ring (1) D25-097-2110 - Outer Manifold O-ring (1) D25-073-2110 - Inner Manifold O-ring (1) D10-083-2110 - Center Bolt O-ring (1) D25-035-2110 - Valve Seat O-ring (6) D25-020-1010 - Stainless Steel Valve Seat (6) D25-021-1015 - Stainless Steel Valve (6) D25-022-3114 - Valve Spring (6) D25-023-2310 - Celcon Valve Spring Retainer (6) D25-092-2110 - Buna-N Tetra Seal (6)

Hydra-Cell K35-002-1244 The Hydra Cell K35-002-1244 is what is called a loaded cylinder housing. This part includes the cylinder housing, all 5 piston assemblies, 5 Buna diaphragms, plungers, follower and follower screws all assembled together.   Lead Time is usually 3 to 4 weeks

Hydra-Cell A04-001-1200 D10 Adapter Hydra-Cell A04-002-1200 Pump/Motor Adapter Kit for D-10 NEMA 182/184TC-213/215TC size motor.

Hydra-Cell H25XFBVHFEC-A Pump Brass - Viton Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the pump to handle abrasives and particulates that might damage or destroy other types of pumps. Simple, compact design reduces initial investment and lowers maintenance costs. Operational efficiencies reduce energy costs. Able to run dry without damage (or additional maintenance) to the pump in case of accident or operator error. Tolerates non-ideal operating conditions. Minimizes maintenance and downtime because there are no seals, packing or cups to leak or replace. Maximum Discharge Pressure Metallic Heads:1000 psi (69 bar) Maximum Inlet Pressure250 psi (17 bar) Maximum Operating Temperature Metallic Heads:250˚F (121˚C) - Consult factory for correct component selection for temperatures from 160 ̊F (71 ̊C) to 250 ̊F (121 ̊C). Non-metallic Heads:140˚F (60˚C) Maximum Solids Size800 microns Inlet Port1-1/2 inch NPT Discharge Port1 inch NPT Shaft Diameter1-1/8 inch (28.6 mm) Shaft RotationReverse (bi-directional) BearingsTapered roller bearings Oil Capacity3.3 US quarts (3.1 liters) 

Hydra-Cell H25EKCGHFEHA Pump 20Gpm with Cast Iron Head Hydracell H25EKCGHFEHA Diaphragm Pump, 20 GPM, 1" NPT Inlet x 1-1/2" NPT Outlet, 1000 PSI, Cast Iron Head