|
Mounting Bracket for DepthTrax Gauges
Surface mount bracket for all HawkEye boat mount depth and temperature gauges. Weather and impact resistant with a 360-degree swivel that can be mounted anywhere, at any angle.
Compatible with:
DepthTrax 2B and 2BX,
DepthTrax 1B and 1BX
D10D and D10DX
DF1000D and DF10000DX
1000-01 and 1000.01T
Features:
Easily installed
Weather and impact-resistant ABS plastic
Mounts on any flat surface
In the Box:
Surface mount bracket
Anti-vibration adhesive pad
*Sold as an Individual
|
15.73 |
|
|
Stainless Steel Mounting Bracket f/Side Mount Table Pedestal
Polished stainless steel, side mount table pedestal removes when not in use for clear decks. Locking feature offers added mounting strength.
Features:
Polished stainless steel pedestal & table support
Anodized aluminum bracket
Locking pull pin offers added mounting strength
Removable 125° bent leg
Dimensions: 4-7/8"W x 4"H x 1/2"D
Screw: #10 flat head / 1/4" hole.
Benefits:
Eliminates the need for mounting holes in boat deck and/or cockpit
Easy to remove when not in use, for clear passage and storage
Quick set-up and removal in tight spaces
Increased leg & foot room
|
75.34 |
|
|
Mounting Bracket f/GO9 & Vulcan 9; NSS7 and ZEUS7
Gimbal mounting bracket for Simrad GO9 & B&G Vulcan 9; NSS7 and ZEUS7
|
40.79 |
|
|
1014 Mounting Bracket f/1011 12V Socket
Socket not included
Features:
Designed to withstand the rigors of wet environments and constant vibration
Large contact surfaces for good electrical connection
Twist lock system - plug locks securely into socket
Internal strain relief and cord seal
Nickel plated copper alloy used for all current carrying components
Front panel, rear panel, or surface mount
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3.79 |
|
|
Flat Mount Bracket f/StructureScan 3D Ducer & TotalScan Ducer
3D Transducer Flush Mount Bracket is used to flush mount the transducer under the boats Hull.
Suits TotalScan and 3D Transom Transducers
|
50.96 |
|
|
Transom Mount Bracket f/Livescope Plus LVS34
Easily attach your compatible LiveScope™ transducer to the transom of your boat with this stainless steel mount.
|
89.99 |
|
|
Chrome Trim Bezel for DepthTrax Gauges
Customize the look of your Boat Mount Depth Finder display with this chrome plastic trim ring (bezel). It's specially coated to withstand oxidation and corrosion.
Compatible with:
DepthTrax 2B and 2BX,
DepthTrax 1B and 1BX
D10D and D10DX
DF1000D and DF10000DX
1000-01 and 1000.01T
*Sold as an Individual
|
8.23 |
|
|
Flush Mounting Kit for 85mm Gauges
Hardware needed to flush mount Veratron 85 mm gauges.
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
38.34 |
|
|
Trim Tab Mounting Bracket for SCM-10 - Supports One Light
Trim Tab Mounting Brackets
Shadow-Caster Trim Tab SCM-TT mounting brackets are the ultimate in mounting accessories for our SCM-4 , SCM-6 and SCM-10 size lights. When your boat cannot support the lights on the transom or you need more light, your Trim Tab will work just as well. Each size is packaged with all the mounting hardware required.
They are perfect for adding more light to the transom of your boat, and also work well for customers who may not want to install Shadow-Caster lights on their boat's transom. The bracket is designed to allow for the same great spread and brightness as Shadow-Caster lights mounted on the transom.
Specifications:
SCM-TT-10: 10" Length (254mm)
316 Stainless Steel Materials
1-Year Warranty
Made in the USA
WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
202.80 |
|
|
Trim Tab Mounting Bracket for SCM-6 - Supports One Light
Trim Tab Mounting Brackets
Shadow-Caster Trim Tab SCM-TT mounting brackets are the ultimate in mounting accessories for our SCM-4 , SCM-6 and SCM-10 size lights. When your boat cannot support the lights on the transom or you need more light, your Trim Tab will work just as well. Each size is packaged with all the mounting hardware required.
They are perfect for adding more light to the transom of your boat, and also work well for customers who may not want to install Shadow-Caster lights on their boat's transom. The bracket is designed to allow for the same great spread and brightness as Shadow-Caster lights mounted on the transom.
Specifications:
SCM-TT-6: 7.2" Length (183mm)
316 Stainless Steel Materials
1-Year Warranty
Made in the USA
WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
202.80 |
|
|
Trim Tab Mounting Bracket for SCM-4 - Supports One Light
Trim Tab Mounting Brackets
Shadow-Caster Trim Tab SCM-TT mounting brackets are the ultimate in mounting accessories for our SCM-4 , SCM-6 and SCM-10 size lights. When your boat cannot support the lights on the transom or you need more light, your Trim Tab will work just as well. Each size is packaged with all the mounting hardware required.
They are perfect for adding more light to the transom of your boat, and also work well for customers who may not want to install Shadow-Caster lights on their boat's transom. The bracket is designed to allow for the same great spread and brightness as Shadow-Caster lights mounted on the transom.
Specifications:
SCM-TT-4: 6.5" Length (165mm)
316 Stainless Steel Materials
1-Year Warranty
Made in the USA
WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
202.80 |
|
|
Mounting Bracket for Series 970 Portable Toilets
Stainless Steel hold-down brackets/fasteners for Series 970 portable toilets. Secures toilet to the floor.
Mounting screws not included.
*Sold as an Individual
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
35.18 |
|
|
Apollo™ Monoblock & 4 Channel Marine Amplifier Mounting Bracket
Use this mounting bracket to easily install your Apollo Monoblock or 4 channel marine amplifier. Simply secure the mounting bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.
Technical Specifications:
Dimensions (WxHxD) - 4.72" x 6.08" x .39"
In the Box:
Mounting bracket
Four 8-gauge, self-tapping screws
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.23 |
|
|
Apollo™ 6 & 8 Channel Marine Amplifier Mounting Bracket
Use this mounting bracket to easily install your Apollo 6/8 channel marine amplifier. Simply secure the mounting bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.
Technical Specifications:
Dimensions (WxHxD) - 7.87" x 6.08" x .39"
In the Box:
Mounting bracket
Four 8-gauge, self-tapping screws
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.23 |
|
|
Gimbal Bracket and Knobs for 9" Lowrance units
Gimbal Mounting Bracket f/HDS-9 Gen2 Touch/HDS Gen3/HDS Carbon/Elite-Ti/Hook/Elite-Chirp
|
40.96 |
|