|
El Outboard Steering Kit for Up To 150HP Motors
401 Manual Helm with Fitting Kit
The heart of the Admiral Series is the HyDrive M402 helm unit. The 7-piston pumps are precision manufactured to standards and tolerances that are second to none. In-built lock valves, which eliminate torque feedback are standard. The light, smooth steering must be experienced to be appreciated. Designed as a complete Do It Yourself installation, everything you need is supplied including detailed instructions. You don’t even have to know anything about hydraulics!
The Admiral Series 401 helm units offer improved internal efficiencies and unique assembly design, consolidating HyDrive Engineering‘s position as a world leader in hydraulic boat steering. Two years of design development and testing have resulted in these helms being selected as the standard helm supplied in all HyDrive steering kits.
Features:
Front-mount design for maximum appeal
Improved internal efficiency
Brass wheel nut and washer
Stainless steel steering wheel shaft - not aluminum
Anti-splash filler cap for rough conditions
Unique assembly design for ease of service and maximum performance
Stainless steel studs, nuts, and washer pre-fitted for convenience
Highly efficient non-return valves for non-feedback of helm unit - eliminates all torque from the steering cylinder
Ultra 15 Oil Quantity 2 - 1 Liter Bottles
Features:
For use in HyDrive Skipper and Admiral Series Hydraulic steering systems only
Not for use in HyDrive 2000 Series Steering Systems
This oil is compatible with HyDrive HF15, but should not be mixed with any other fluids
N-8 - 49' Nylon Tube 3/8"
Features:
Semi-Rigid Nylon Tube at 3/8 Inch OD (49' Coil, You Cut to length to suit)
Use with HP Compression Olive and Nut Fittings
Supplied in HY EL O/B KIT
Stainless Steel Tube & Rod for Up To 150HP Up To 150HP Outboard
Specifications:
Cylinder Tube = Stainless Steel
Cylinder Tube Dia. = 1.33 Inches
Cylinder Rod = Stainless Steel
Cylinder Brackets = Stainless Steel
Cylinder 1 " Nylok Nuts = Stainless Steel
Cylinder End Caps = Cast Aluminum
Cylinder Rod Stroke = 7-1/2 Inches
Cylinder Type = Un Balanced Cylinder
Cylinder Volume Big Side Vol = 155 ccSmall side Vol = 115 cc
Steering Wheel HO/HO = 5.5 and 4.1 Turns
Total length Rod Compressed = 15.75 Inches
Rod Extended = 23.00 Inches
Cylinder Total Weight = 3.15 Pounds (1427 Grams)
|
1399.44 |
|
|
Stainless Steel Tube & Rod for Up To 150HP Up To 150HP Outboard
Specifications:
Cylinder Tube = Stainless Steel
Cylinder Tube Dia. = 1.33 Inches
Cylinder Rod = Stainless Steel
Cylinder Brackets = Stainless Steel
Cylinder 1 " Nylok Nuts = Stainless Steel
Cylinder End Caps = Cast Aluminum
Cylinder Rod Stroke = 7-1/2 Inches
Cylinder Type = Un Balanced Cylinder
Cylinder Volume Big Side Vol = 155 ccSmall side Vol = 115 cc
Steering Wheel HO/HO = 5.5 and 4.1 Turns
Total length Rod Compressed = 15.75 Inches
Rod Extended = 23.00 Inches
Cylinder Total Weight = 3.15 Pounds (1427 Grams)
|
239.99 |
|
|
HYCO 1.1T Front Mount OB Tilt Steering up to 150HP
The Hyco 1.1T With Tilt Hydraulic Steering Kit is all you need for a complete steering system. This system is used on all engines up to 150HP or less. If engine H/P exceeds 150 then the Protech packaged system must be used.
Package Kit Includes:
1-UP20T Tilt Helm Pump
UC95-OBF/1 Front mount Hydraulic Cylinder
2 quarts of Oil-15 Hydraulic Oil
Installation and Instructions manual included
*Premade Hose Kit 2' to 30' ft. length is not included and steering wheel not included.
Please Note:
There are two Cylinders offered, the UC95-OBF/3 model is for Honda BF115 and BF130 engines and Mercury Optimax 75, 90, and 115 HP engines only, and the UC95-OBF/1 is used on all other O/B models.
|
1121.46 |
|
|
Center Rigging Kit
Rigs one outrigger up to 25'
Packaged in a durable marine mesh bag for storage
Premium kit includes:
Release clips, shock cord with stainless steel snap, 1-1/4" float and pulley
(for Standard Kit, substitute 1-1/4" float cork and glass eye)
Barrel swivel, snap swivels, crimps
Stainless steel pad eye and screws
50' of UV-protected Dacron® line
|
71.22 |
|
|
Bronze Clam Shell Style Hull Strainer f/Up To 1" Thru Hull
Features:
C84400 bronze body and door.
Cast filter slots.
Pressure relief holes in door casting.
Specifications:
Flow Type: STD
Mount Ring Incl.: No
Max T-Hull: 1"
Perf Dia.: Cast Slots
|
24.67 |
|
|
Bronze Clam Shell Style Hull Strainer f/Up To 1-1/2" Thru Hull
Features:
C84400 bronze body and door.
Cast filter slots.
Pressure relief holes in door casting.
Specifications:
Flow Type: STD
Mounting Ring Incl.: No
Max T-Hull: 1-1/2"
Perf Dia.: Cast Slots
|
41.33 |
|
|
Bronze Clam Shell Style Hull Strainer f/Up To 2-1/2" Thru Hull
Features:
C84400 bronze body and door.
Cast filter slots.
Pressure relief holes in door casting.
Specifications:
Flow Type: STD
Mount Ring Incl.: No
Max T-Hull: 2-1/2"
Perf Dia.: Cast Slots
|
74.00 |
|
|
Bronze Clam Shell Style Hull Strainer w/Mount Ring f/Up To 1" Thru Hull
Features:
Mount ring design allows easy access to Thru Hulls.
C84400 bronze body and door.
Cast filter slots.
Pressure relief holes in door casting.
Specifications:
Flow Type: STD
Mount Ring Incl.: YES
Max T-Hull: 1"
Perf Dia.: Cast Slots
|
40.00 |
|
|
Bronze Clam Shell Style Hull Strainer w/Mount Ring f/Up To 1-1/2" Thru Hull
Features:
Mount ring design allows easy access to Thru Hulls.
C84400 bronze body and door.
Cast filter slots.
Pressure relief holes in door casting.
Specifications:
Flow Type: STD
Mount Ring Incl: YES
Max T-Hull: 1-1/2"
Perf Dia: Cast Slots
|
82.00 |
|
|
Bronze Clam Shell Style Hull Strainer w/Mount Ring f/Up To 2-1/2" Thru Hull
Features:
Mount ring design allows easy access to Thru Hulls.
C84400 bronze body and door.
Cast filter slots.
Pressure relief holes in door casting.
Specifications:
Flow Type: STD
Mount Ring Incl: YES
Max T-Hull: 2-1/2"
Perf Dia: Cast Slots
|
108.67 |
|
|
Deck Pod - Ultra Compact f/Up to 7" Displays
Compact Deck Pod - Up to 7" displays - Slim Back - White
Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.
For Displays & Standard Instruments:
Fits up to 7” displays (ultra compact , slim back)
Usable face 9.4H x 6.25W
Accommodates 3/4 Standard instruments (e.g. ST60)
Features:
One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position
An adjustable ball joint allows range of movement and multiple mounting angles
Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration
Deck Pod models can be overhead mounted. Refer to part number guide for compatibility
Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front
This design allows for a quick and safe install and repeat servicing
Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time
As standard you will receive your Scanpod uncut
|
402.30 |
|
|
Baystar Hydraulic Steering System for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables, and outboard engines with ABYC standard engine tilt tubes. For single station, single engine use only. BayStar is not intended for high speed, high performance type boats, such as bass boats. Low friction hydraulic steering system, 5 turns lock-to-lock. Balanced cylinder with compact design that fits most splashwells and provides full engine movement. Compact helm with small footprint, requires only 3" dash hole (standard or tilt).Packaged complete with helm, cylinder, fittings, tubing, oil, fill kit and detailed instructions. Standard 3/4" tapered steering shaft. Meets ABYC standards and NMMA certification requirements. Baystar Steering System is not for use on pontoon boats.
|
988.99 |
|
|
Exit Plate/Flat for up to 1/2" Line
Specifications:
Halyard Size 1/2" (12 mm)
Mast Stat Opening 2-1/4"x 13/16" (57 mm x 21 mm)
Fasteners (4), #10 RH (5 mm)
Weight 1 oz. (28 g)
|
27.20 |
|
|
Exit Plate/Flat for up to 3/4" Line
Specifications:
Halyard Size 3/4" (19 mm)
Mast Stat Opening 3-1/4"x 1" (83 mm x 25 mm)
Fasteners (4), #10 RH (5 mm)
Weight 1 oz. (28 g)
|
55.81 |
|
|
Anchor Lock for Up to 55lb Anchors
Anchor lock holds up to a 55lb anchor in place and prevents accidental deployment.
Features:
Surface mountable
Works with chain or shackle
Corrosion-resistant
Easy installation
Technical Specifications:
Material - Stainless Steel
Pin Size - .25"
Dimensions (H x L x W) - 1.5" x 4" x 1.5"
Max. Capacity - 55lbs
*Sold as an Individual
|
40.50 |
|