|
Horizontal Mount Enclosure with Additional 5' Feeder Hose
For installing a washdown hose on our boat, home or spa
HoseCoil's Horizontal Mount Enclosure is constructed of high density, durable ABS with high gloss UV protective coating. Included is a solid blue 5' HoseCoil constructed of high performance polyether material. HoseCoil features solid brass fittings and an adjustable brass nozzle with a rubber grip and rubber tip for fiberglass protection.
The Horizontal Mount Enclosure can be used to plumbed directly into your existing pressurized water system or raw water washdown pump. Included is a 5' feeder hose for direct connection to an external water spigot.
|
146.77 |
|
|
Flush Mount Enclosure with Nozzle
For cockpit or any onboard washdown
The highest quality wash down system on the market, HoseCoil's Flush Mount Enclosure includes a quick release lid for hiding and protecting a solid blue 15' HoseCoil. HoseCoil is constructed of high performance polytherester material.
Featuring solid brass fittings and an adjustable brass nozzle with a rubber grip and rubber tip for fiberglass protection. HoseCoil is designed to connect directly into the boat's internal pressurized water system.
Dimensions: 8"d x 13"depth
Requires:
6-3/4" cut out
13" below deck clearance
Features:
PETG Housing Material - Extremely durable and see-through for inspection
15' High Performance HoseCoil - Highest quality Polyether material, no kinking damage comapred to vinyl hoses, UV resistant for longer life and no fading, quick recoil for easy storage and brass, long-life fittings
Tight O-Ring Seal - High quality seal for tight fit
Polyethylene Lid - Easy to use locking hatch
Brass Twist Nozzle - Positive shutoff, variable flow rate and rubber tip for protection
Brass Bulkhead Inlet with Stainless Steel Fittings - Large diameter for better flow rate, stronger and longer lasting than plastic
|
166.37 |
|
|
Stainless Steel Flush Mount Gas Tank Vent 5/8" Hose - Straight
The Flush Mount Gas Tank Vent provides the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Helps prevent fuel spills, blow-back, and ensures fumes vent outboard instead of inside the boat. An integral 5/8" hose barb securely connects vent hose. Constructed of corrosion resistant investment cast 316 stainless steel.
|
25.91 |
|
|
Side Mount Enclosure
For cockpit or any onboard washdown
HoseCoil's Side Mount Enclosure is constructed of high density, durable ABS with high gloss UV protective coating. Included is a solid blue 15' HoseCoil constructed of high performance polytherester material.
HoseCoil features a spray pattern adjustable nozzle with a comfortable rubber grip. This enclosure is designed to connect directly into the boat's internal pressurized water system.
Dimensions: 8"w x 15"h x 5"d
|
102.73 |
|
|
Clamp-On Rod Holder Horizontal Mount - Aluminum - 2.375" - 2-3/8" OD - Black
Features:
Clamp-On
Horizontal Mount
Aluminum
2.375" - 2-3/8" OD
Black
Fits Pipe Size #5
|
115.38 |
|
|
Knob w/Lock & 5/16"-18 Brass Hole - C-Size
The RAM locking knob, includes a brass 5/16"-18 thread, for 1.5" socket arms; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
24.76 |
|
|
Side Mount Expandable Enclosure with 50′ Hose & Rubber Tip Nozzle
The Side Mount Expandable Enclosure is a great way to mount and store a 50’ hose on your boat. Designed for cockpit washdown, the enclosure is built with a strong acrylic-capped ABS material and incorporates a 50’ Expandable Hose with a rubber tip nozzle. This enclosure is designed to connect directly to your existing pressurized water system or raw water washdown pump.
Features:
Gen3 Material Enhancements – The enclosure is built with a strong acrylic-capped ABS material. The excellent UV stability of the acrylic is combined with the durability of the ABS. We thermoform HoseCoil Enclosures in our Bend, Oregon warehouse because it’s the best way to provide a high-quality product with excellent high-gloss retention.
HoseCoil Expandable Hose – The 50′ expandable hose shrinks to one-third of its length for ease of storage and is built with a double-layered rubber inner tube and durable Dacron outer cover. Dacron is known for its tough and elastic properties. The hose easily coils and feels just like a quality 3/4″ braided dock line.
Rubber Tip Nozzle – The included rubber tip nozzle protects your boat surface from dings and scratches, and the over-molded comfort grip makes it easy to handle.
Reconfigurable Shutoff Valve – For a clean installation we recommend mounting through the bulkhead to cleanly connect to a designated washdown pump or into the boat’s freshwater plumbing system below decks. The valve can also be reconfigured to exit the bottom of the enclosure. This will allow convenient access to an external spigot in the cockpit. A feeder hose to connect to the Shutoff Valve to the external spigot is not included. The shutoff component is important for two reasons. First, water pressure needs to be removed from the expandable hose in order for the hose to shrink to its original size before it can be stowed back into the enclosure. Secondly, it is important to have a physical shutoff for source water when not plumbing to a designated washdown pump with its own electrical shutoff switch. If you ever need to remove or replace the hose, simply turn the shutoff knob on the valve and unscrew the hose from the fitting.
Nickel Chrome-Plated Stainless Steel Screws – We provide nickel chrome-plated 316 stainless steel tamperproof mounting hardware for security combined with a long-lasting shine.
|
146.77 |
|
|
Navilight All RED 360° 2NM w/Navimount Base & Horizontal Mount - White
Portable All-round RED Navigation light with Navimount base, compatible with Navisafe Navimount system and many GoPro® / Action camera mounts.
The Navilight All RED 360° without the Navimount base can be mounted directly to the 4-piece-pole but also directly to all kind of GoPro® / Action camera mounts.
Technical Specifications:
5 Modes: 360°
Float light facing up
Submersible to 20M /66'
Corrosion resistant
Powered by three AAA batteries (not included)
Modes:
16 RED LED 360° Constant lights / 40 - 45hrs
16 RED LED 360° Flashing lights / 110 - 115hrs
10 RED LED 225° Forward lights / 70 - 75hrs
6 RED LED 135° Stern lights / 95-100hrs
4 RED LED 360° Dim function / 125-130hrs
Navimount Horizontal - White
The Navimount Horizontal is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to horizontal surfaces - e.g. the boat deck or cabin roof.
Includes:
Horizontal Mount
Two self tapping stainless steel screws
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
82.37 |
|
|
Navilight All RED 360° 2NM w/Navimount Base & Horizontal Mount - Black
Portable All-round RED Navigation light with Navimount base, compatible with Navisafe Navimount system and many GoPro® / Action camera mounts.
The Navilight All RED 360° without the Navimount base can be mounted directly to the 4-piece-pole but also directly to all kind of GoPro® / Action camera mounts.
Technical Specifications:
5 Modes: 360°
Float light facing up
Submersible to 20M /66'
Corrosion resistant
Powered by three AAA batteries (not included)
Modes:
16 RED LED 360° Constant lights / 40 - 45hrs
16 RED LED 360° Flashing lights / 110 - 115hrs
10 RED LED 225° Forward lights / 70 - 75hrs
6 RED LED 135° Stern lights / 95-100hrs
4 RED LED 360° Dim function / 125-130hrs
Navimount Horizontal - Black
The Navimount Horizontal is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to horizontal surfaces - e.g. the boat deck or cabin roof.
Includes:
Horizontal Mount
Two self tapping stainless steel screws
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
82.37 |
|
|
White & Stainless Steel Recessed Transom Shower Handle/Hose - Vertical/Horizontal Mount - 6' Hose
This recessed shower cap with composite cup mounts vertically or horizontally. Ideal as a deck or transom shower.
Features:
Push-Button sprayer
ABS handle with an attached lanyard for easy pull-out
Mounting hardware is included
White with 6 ft. black nylon hose
Specifications:
Water Connection: 3/8 in. BSP-F threaded fitting on the hose
Mounting Hole: 2-3/4 in. diameter
Shipping Weight: 4 lbs.
|
122.71 |
|
|
3116 - SMS Panel Enclosure with ELCI (30A) and 3 Blanks - 120V
The 3116 panel enclosure is built for Equipment Leakage Circuit Interrupters (ELCI) main circuit breakers and other large frame devices. Meets ABYC E-11 when used with an ELCI Main circuit breaker and mounted within 10' of AC shore power inlet.
Features:
Blank apertures for custom breaker loading
Glass filled polycarbonate base
Clear cover allows easy view of circuit breaker status
Overlapping cover for strength and increased gasket protection
Oversized, formed in place seamless PUR gasket
Easily removable stainless steel hinge pin for unobstructed installation
Stainless steel latch secures cover without penetrating the enclosure
Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers
Includes waterproof glands
LED lights for back lighting and ON indication
Technical Specifications:
Circuit Breaker Type - 1 x ELCI (30A) Main 120V and 3 x Blank
Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm)
Dimensions (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm)
LEDs Installed - 1 x Red (Reverse Polarity - 120V AC and 4 x Green ON (120V AC)
In the Box:
3116 Enclosure
Glands x 5
Labels
Mounting hardware
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
529.85 |
|
|
Navilight 360° 2NM White w/Navimount Base & Horizontal Mount - White
Navimount Base Lights will work with Railblaza mounting systems, when used with the Railblaza 932 converter. Navimount base lights include a U-Bracket and Navibolt-bracket.
Features:
360° All-round/Anchor light with 15 hour burn time
225° Masthead light with 24 hour burn time
135° Sternlight with 32 hour burn time
Safety/Flashing light with 85 hour burn time
Cabin/Courtesy light with 72 hour burn time
Navimount Horizontal - White
The Navimount Horizontal is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to horizontal surfaces - e.g. the boat deck or cabin roof.
Includes:
Horizontal Mount
Two self tapping stainless steel screws
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
82.37 |
|
|
Navilight 360° 2NM White w/Navimount Base & Horizontal Mount - Black
Navimount Base Lights will work with Railblaza mounting systems, when used with the Railblaza 932 converter. Navimount base lights include a U-Bracket and Navibolt-bracket.
Features:
360° All-round/Anchor light with 15 hour burn time
225° Masthead light with 24 hour burn time
135° Sternlight with 32 hour burn time
Safety/Flashing light with 85 hour burn time
Cabin/Courtesy light with 72 hour burn time
Navimount Horizontal - Black
The Navimount Horizontal is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to horizontal surfaces - e.g. the boat deck or cabin roof.
Includes:
Horizontal Mount
Two self tapping stainless steel screws
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
82.37 |
|
|
Navilight Tricolor 2NM w/Navibolt Base & Horizontal Mount - White
Portable Tricolor Navilight with Navibolt base, compatible with Navisafe Navimount system. This is an extremely durable and strong solution. This is a very low and tight mounting solution together with the any of the Navimount.
Technical Specifications:
US Coast Guard approved for 2 nautical miles
5 Modes: Tricolor Masthead light (135x white, 112,5x red, 112,5x green), BiColor side light, red side light, green side light, white Sternlight
Floats light facing up
Submersible to 20M/66'
Corrosion resistant
Powered by three AAA batteries (not included)
Navimount Horizontal - White
The Navimount Horizontal is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to horizontal surfaces - e.g. the boat deck or cabin roof.
Includes:
Horizontal Mount
Two self tapping stainless steel screws
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
91.68 |
|
|
Navilight Tricolor 2NM w/Navibolt Base & Horizontal Mount - Black
Portable Tricolor Navilight with Navibolt base, compatible with Navisafe Navimount system. This is an extremely durable and strong solution. This is a very low and tight mounting solution together with the any of the Navimount.
Technical Specifications:
US Coast Guard approved for 2 nautical miles
5 Modes: Tricolor Masthead light (135x white, 112,5x red, 112,5x green), BiColor side light, red side light, green side light, white Sternlight
Floats light facing up
Submersible to 20M/66'
Corrosion resistant
Powered by three AAA batteries (not included)
Navimount Horizontal - Black
The Navimount Horizontal is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to horizontal surfaces - e.g. the boat deck or cabin roof.
Includes:
Horizontal Mount
Two self tapping stainless steel screws
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
91.68 |
|