|
General Pump W101/T1011 Pump 5.6Gpm
General Pump T 47 series T1011 (Interpump W101) triplex pressure wash pump.
Maximum Rated Pressure: 2000 PSI
5.6 GPM @ 1450 RPM
4.5 GPM @ 1125 RPM
Shaft Diameter: 24mm
Inlet: 1/2" FPT
Outlet: 3/8" FPT
Unloader sold separately.
Do not install pump without unloader or pressure regulator.
|
562.50 |
|
|
General Pump 112 Repair Kit
Genuine Interpump / General Pump Kit 112
16mm Packing Assembly
Includes Brass
Services one (1) cylinder
*Three (3) kits are required for complete pump repair
|
151.54 |
|
|
General Pump WM02 Seal Kit
Packing kit for standard General Pump WM series pumps including the WM0515C, WM0815C, WM1015C, WM1615C, WM2315C, WM2415CL, WM3015C, WM3615C, and WM4215C models. OEM replacement parts, guaranteed to fit. Use to repack pump during maintenance or repairs.
Includes:
66024, Anti-extrusion Ring (3)
701051, O-Ring, 70D (3)
90220000, Low Pressure Seal (3)
520376, Low Pressure Case Seal (3)
710010, Glyd Case, 18mm (3)
710011, Square Seal, 18mm (3)
520375, Seal Retainer (3)
701023, O-Ring (3)
|
263.93 |
|
|
General Pump WM4215C Reverse Osmosis Pump
The WM Series Direct Drive Industrial Pressure Washer Pump or Reverse Osmosis Pump.
Hollow Shaft – General Pump WM Series Specs:
Reverse Osmosis Pump - Left Shaft
Max. Inlet Pressure 50 PSI
Max. Fluid Temperature 140 Degrees Fahrenheit
Inlet Port Thread 1/2in. NPT/F
Discharge Port Thread 3/8in. NPT/F
Shaft Diameter 5/8in.
Pump Dimensions 9.9in. x 7.5in. x 6.0in.
Crankcase Oil Capacity 12 oz (use GP Series 100 Oil)
Hollow Shaft – General Pump WM Series Features:
316 stainless steel fluid end for superior corrosion protection.
Solid ceramic plungers with advanced surface finish assure durability and longevity.
Compact design offers solutions to space limitations.
Parallel inlet and outlet valve design for efficiency and easy maintenance.
|
3246.31 |
|
|
General Pump 650021 Slinger Brass
General Pump 650021 is a replacement slinger for WM Series reverse osmosis pumps.
|
1.93 |
|
|
General Pump 650048 Gasket Rear Cover
General Pump 650048 is a gasket for the rear cover on WM Series pumps.
Compatible with models WM0515C, WM0815C, WM1015C, WM1615C, WM2315C, WM2415CL, WM3015C, WM3615C, WM4215C, WM2315C, WM3015C, and WM4215C.
|
15.28 |
|
|
General Pump WM4215CL Reverse Osmosis Pump
The WM Series Direct Drive Industrial Pressure Washer Pump or Reverse Osmosis Pump.
This General Pump WM4215CL has dual inlet and outlet porting. It features the following specs: right hand, 5/8" hollow shaft, 4.2 GPM, 1500 PSI, 1750 RPM
Product Description
Reverse Osmosis Pump - Right Shaft
This pump is from the General Pump WM Series. It is a reverse osmosis, hollow shaft pump with roller bearings. See Related Products for compatible pump oil.
• 316 stainless steel wet-end
• 300 Series stainless steel fasteners
• Parallel inlet and outlet valve design for efficiency and easy maintenance
• Corrosion resistant valve and packing design
• Innovative wear resistant high and low-pressure seals
• Dual inlet and outlet porting
• Anodized crankcase for corrosion resistance
• NEMA 56C flange with 5/8” hollow shaft
Technical Specifications
Bore: 18 mmStroke: 12.5 mmC
rankcase Capacity: 12 oz.Max
Temperature: 140º F
Inlet Port: 1/2"Shaft
Diameter: 5/8"Max
GPM: 4.2Max
PSI: 1500
RPM: 1750
|
3462.72 |
|
|
General Pump WM4215CL Reverse Osmosis Pump with Motor
This General Pump WM4215CL has dual inlet and outlet porting. Features 316 Stainless Steel wet-end and 300 Series stainless steel fasteners, and has a new generation seal system that allows for a longer life. Produces up to 4.2 GPM, at up to 1500 PSI.
Solid ceramic plungers with advanced surface finish assure durability and longevity.
Compact design offers solutions to space limitations.
Parallel inlet and outlet valve design for efficiency and easy maintenance.
NEMA 56C flange with 5/8” hollow left side shaft
Corrosion resistant valve and packing design
Innovative wear resistant high and low-pressure seals
Dual inlet and outlet porting
Anodized crankcase for corrosion resistance
Specifications:
Max Volume: 4.2 GPM
Max Discharge Pressure: 1500 PSI
Max Pump Speed: 1750 RPM
Max Inlet Pressure: 50 PSI
Motor is a 10W18BCT
We build these at time of order. Please see the Literature for pump and motor specs.
|
3623.00 |
|
|
General Pump 701133 O Ring Buna
Made of Buna-N with a 70 Duro hardness.
Compatible Pumps:
T Series 69
T41
CW Series 69
CW1012
WM Series
WM0515C
WM0815C
WM1015C
WM1615C
WM2315C
WM2415CL
WM2315C
WM3015C
WM4215C
WM3015C
WM3615C
WM4215C
WM2315C
WM3015C
WM3615C
WM4215C
WM2515S
WM4215S
|
2.70 |
|
|
General Pump 710002 Oil Seal
Each pump requires three seals to service fully.
Compatible Pumps:
TC Series “60”
TC1506GUI
TC1507GUI
TC1508GUI
TC1509GUI
TT Series 51, EBF
T9051EBF
TT9111EBF
TT9061EBF
TT9071EBF
TT2021EBF
TT2028EBF
TT2035EBF
WM Series
WM0515C
WM0815C
WM1015C
WM1615C
WM2315C
WM2415CL
WM3015C
WM3615C
WM4215C
WM2515S
WM4215S
|
16.43 |
|
|
General Pump 100295 Oil 30W 16 Oz
30W viscosity, non-detergent.
Special anti-scuff and anti-wear agents extend the lives of gear, vane, radial piston, and plunger pumps.
Resists formation of harmful oil water emulsions
Exceeds wear prevention requirements of all major.
One Pint Bottles.
|
18.20 |
|
|
General Pump 710005 Crankcase Oil Seal
|
21.69 |
|
|
General Pump WM01 Valve Kit
Contains:
Part 103042, 316 SS Valve Assembly (6)
Part 701115, O-Ring (6)
Part 701117, O-Ring (6)
Use in Following Pump Models:
WM0515C
WM0815C
WM1015C
WM1615C
WM2315C
WM2415C
WM3015C
WM3615C
WM4215C
|
224.61 |
|
|
Micropump GJ-N21.PF1S.G-B1 Pump Head G Mount
The GJ 83038 delivers exceptional pumping performance for any high-precision application. These compact, magnetically driven gear pumps feature a cavity style design with no dynamic seals for applications that cannot tolerate leaks. With benefits like chemical resistance, abrasive fluids pumping, smooth, pulseless delivery, and reverse pumping - GJ Series pumps are available with a wide range of options, as well as in standard and OEM configurations.
Displacement:
0.316 ml/rev (N21)
0.64 ml/rev (N23)
0.91 ml/rev (N25)
1.23 ml/rev (N27)
Recommended Speed Range: 500-5500 RPM
Flow Rate (min): 158 mL/min | 2.5 US gal/hr
Flow Rate (max): 6.8 L/min | 1.8 US gpm
Differential Pressure (max): 5.5 bar | 80 psi
System Pressure (max): 21 bar | 300 psi
Temperature Range: -46 to 121 °C | -50 to 250 °F
Viscosity Range: 0.5 to 1500 cP
Standard Ports: 1/8"-27 NPT(F)
Model: GJ-N21.PF1S.G-B1
|
1217.81 |
|
|
Diaphragm Pump Repair Kit
Raritan's Diaphragm Pump Repair Kit is made specifically for Raritan Toilets equipped with diaphragm intake pumps.
Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.31 |
|