Gianneschi 15CE1 Control-Press 24V 1" 1.5Bar

Gianneschi 15CE122 Control-Press 24V 1" 2.2Bar

Gianneschi 15CE3 Control-Press 24V 1.25

Gianneschi 15CE0 Control-Press 12V 1" 1.5Bar

Gianneschi ECOJET-2B-CE-24V Fresh Water System Pressurized fresh water, equipped with flow and pressure sensors managed by an electronic board, replaces the traditional expansion vessel system with the following advantages:   Reduction of the number of pump starts with consequent reduction of wear - Reduction of overall dimensions - Protection of the pump against dry running - Maintenance of the pressure value during water supply - Display of the pump status (Power on, Pump on, Failure) - Automatic reset (when voltage is restored) - High performance reduced absorption - System calibrated and tested does not require any adjustment during installation   APPLICATIONS: Fresh water distribution under pressure on boats. Kitchens, showers, sinks, boilers, etc.   CONSTRUCTION: The standard configuration of the Control Press system is made with the ECOINOX, ECOJET, JET series el / pumps and includes: Sturdy techno-polymer pressure switch body - Stainless steel base on rubber antivibration mounts (on request) - Non-return valve

Gianneschi ECOINOX-2-CE-230/60 Water System 230V 60Hz This unit comes with the Control Press S3

Gianneschi CP20-12V Bronze 12V Self-Priming Pump Gianneschi CP-20-12V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.2KW (0.25 Horsepower), 2600 RPM, 12 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Applications for the CP2012V include liquid intake, grey water discharges, bilges, showers, diesel and oil, galleys, as well as in pumping seawater and fresh water. This pump is not suitable for viscous liquids or pumping abrasive liquids. Install the pump in a dry and well ventilated location.   The pump must be placed on a solid surface in the horizontal position, feet down. To reduce vibration block the machine with the bolts to the surface and install some vibration dumpers. These pump usually do not need any maintenance so long as the following precautions are taken. If there is a risk of freezing, it is necessary to empty the pump casing then fill the pump up before running it again. Make sure the pump never runs dry.

Gianneschi IDROMINI-ACB61E-12V Bronze Pump 12V Water Pressure System Main Water Pressure System features: High quality, bronze self-priming centrifugal pump with star impeller Includes pressure switch, membrane tank, pressure gauge and no-return valve Painted steel with s/steel flange Tank capacity from 2 to 5 litres

Gianneschi IDROMINI-ACB80E-12V Bronze 12V Water Pressure System Main Water Pressure System features: High quality, bronze self-priming centrifugal pump with star impeller Includes pressure switch, membrane tank, pressure gauge and no-return valve Painted steel with s/steel flange or totally s/steel tank Tank capacity from 2 to 5 litres

Gianneschi KECOJ100NT Kit For Ecojet1 12V

Gianneschi CS2-24V Air Compressor withTank

Gianneschi 15CET2 Control-Press CE 230V 1"

Gianneschi 15CE4 Mascontrol CE220V 1Ph 1.25"

Gianneschi SGM45 Brush GM4 7X14 (Cp25/1)

Gianneschi 21ALT020N Accumulator Tank 2 Liter 1/2" Generic Image of Accumulator Tank