Stainless Steel Straight Slip Mount for TV Antennas & weBBoat® 4G Plus Lifetime Warranty WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SW8 Anchor Swivel - 8mm Stainless Steel Jaw Jaw Swivel - f/11-16 lb. Anchors Stainless Steel Jaw Jaw Swivel

SW10 Anchor Swivel - 10mm Stainless Steel Jaw Jaw Swivel - f/16-44 lb. Anchors Stainless Steel Jaw Jaw Swivel

Stainless Steel Flagpole Hole Mount Pennant Clips - Set of 4 

316 Stainless Steel Alloy Flush Mount Fuel Vent - Straight Vent On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets. Features: Straight Vent Specifications: Hose Size (inch): 5/8" inner diameter Maximum Hull Thickness (inch): 7/8" Installation Hole Size (inch): 1-3/8" *Includes two silicone gaskets

Stainless Steel 90° Flush Mount Rod Holder  A value priced, vertical mount rod holder! This Economy 90° Flush Mount Rod Holder with Cap is constructed of formed 304 stainless steel with a plastic liner, mounting gasket, and integral cap. Features a 90° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included).

SPT1001 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18 and 24, GMR18HD, 18xHD, 18HD+, GMR24HD and 24xHD, GMR40 radars Humminbird - HB2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Nobletec - 4KW radars Raymarine - QUANTUM (Q24C) and QUANTUM 2 (Q24D0, RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, 60, 64-S, GB40/NX40/45/NSE1/12 radars Sitex - RADARpc-4D Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

17" Rail Mount Flag Pole - 1/2" Diameter, Stainless Steel Staff Nylon Mount Features: Rail Mount Flagstaff 304 S.S. staff and Black Nylon Bracket Diameter - 1/2" Length - 17" Bracket - 7/8" and 1" tube

Stainless Steel Pedestal Guard Mounting Feet - Pair Edson Pedestal Guard Mounting Feet are available in pairs as a direct replacement for Edson’s black plastic feet. Gasket and bushing allow for mounting 1”, 1-1/8” or 1-1/4” guard pipes. Nuts and washers included.

SPT1002 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS 2D, 42DL, 42DL+, 4D, 4D-NXT, DRS4W, NavNet 18" and 24" Humminbird - AS 21RD4KW Inerphase - Mini RE-1, 8, 9 JRC 100, 100mk2, 1066, 1500, 1500mk2, 1800, 2000 Koden - 2kW 12" Lowrance - LRA-1800/RB714A/DX42 Navman - 8000 Series - 18" Seiwa - SWR-1, SWR-8, SWR-9 Simrad - GB40, NX4-/45, NSE8/12, RB712A, DX42S Sitex - MDS-1, 8, 9, 12, NKE-1066 Techmarine - T72.01, T72.02, T-72.04 Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

White LED Micro Light with Stainless Steel Bezel & Vertical Mount This Attwood LED Micro Light is a compact and versatile light source that can be installed in numerous locations. Each one delivers industry-leading light output from an extremely compact package. The electropolished stainless steel cover adds an appealing bright finish to a boat, and this light is durable with its fully sealed electronics. It will endure and perform in the harshest conditions, and it can be used in locations such as rod storage boxes without risk of water damage. It can also be mounted under a hardtop or to a rail.  Features:  0.66-watt draw at 12 volts DC White LEDs Rated for 50,000+ hours of use

Blue LED Micro Light with Stainless Steel Bezel & Vertical Mount This Attwood LED Micro Light is a compact and versatile light source that can be installed in numerous locations. Each one delivers industry-leading light output from an extremely compact package. The electropolished stainless steel cover adds an appealing bright finish to a boat, and this light is durable with its fully sealed electronics. It will endure and perform in the harshest conditions, and it can be used in locations such as rod storage boxes without risk of water damage. It can also be mounted under a hardtop or to a rail.  Features:  0.66-watt draw at 12 volts DC Blue LEDs Rated for 50,000+ hours of use

316 Stainless Steel Alloy Flush Mount Fuel Vent - 90° Vent On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets. Features: 90-degree vent Specifications: Hose Size (inch): 5/8" inner diameter Maximum Hull Thickness (inch): 7/8" Installation Hole Size (inch): 1-3/8" *Includes two silicone gaskets

    SALE! Shakespeare 10% Off SeaWatch HDTV Antennas  Don't miss out now until December 28th, 2018, with super savings on Shakespeare TV Antennas.  This sale includes 10% off Shakespeare's 19", 15" and 4" SeaWatch Marine TV Antennas and Shakespeare's 2061 Flat HDTV/FM Antenna.       Specials    Closeouts   Remanufactured    Rebates

3/4" NPT x 3/4" ID Stainless Steel Pipe to Hose Straight Fitting  Features: Male NPT x Hose connection #316 Stainless Steel Sizes from 1/2" to 3" Standard Flow NSF-61 compliant Suitable for use in potable water systems