Flotec FP4112 Cast Iron Shallow Well Jet Pump 1/2 HP Cast iron shallow well jet pumps provide superior performance and high capacities with more pressure for shallow wells 25' or less. KEY FEATURES Superior performance at depths to water of 25' or less Rugged, heavy-duty cast iron pump housing Ready-to-install dual voltage (115v/230v) motor 1-1/4" NPT suction and 1" NPT discharge pipe sizes WARRANTY 1 year limited warranty  BODY CONSTRUCTION:  Cast Iron HORSEPOWER:  1/2 MAXIMUM CAPACITY:  8.8 GPM FLOW AT 10' LIFT and 40 PSI:  7.8 GPM MAX PSI:  56 psi PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT MINIMUM SUCTION PIPE SIZE:  1" NPT DISCHARGE PIPE SIZE:  1" MINIMUM DISCHARGE PIPE SIZE:  3/4" AMP DRAW:  9.4 amps VOLTAGE:  115v/230v (preset to 115v), 60 Hz RECOMMENDED BREAKER:  15 amp LIQUID TEMP RANGE:  32°F-140 °F (0°C-60 °C) JET KIT:  included

Flotec FP4112-08 Cast Iron Shallow Well Jet Pump 1/2 HP Cast iron shallow well jet pumps provide superior performance and high capacities with more pressure for shallow wells 25' or less.   KEY FEATURES Superior performance at depths to water of 25' or less Rugged, heavy-duty cast iron pump housing Ready-to-install dual voltage (115v/230v) motor 1-1/4" NPT suction and 1" NPT discharge pipe sizes   WARRANTY 1 year limited warranty   BODY CONSTRUCTION:  Cast Iron HORSEPOWER:  1/2 MAXIMUM CAPACITY:  8.8 GPM FLOW AT 10' LIFT and 40 PSI:  7.8 GPM MAX PSI:  56 psi PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT MINIMUM SUCTION PIPE SIZE:  1" NPT DISCHARGE PIPE SIZE:  1" MINIMUM DISCHARGE PIPE SIZE:  3/4" AMP DRAW:  9.4 amps VOLTAGE:  115v/230v (preset to 115v), 60 Hz RECOMMENDED BREAKER:  15 amp LIQUID TEMP RANGE:  32°F-140 °F (0°C-60 °C) JET KIT:  included ACCESSORIES INCLUDED:  none

Flotec FP4105 Cast Iron Jet Pump 1/2 HP New cast iron shallow well jet pump is ideal for wells with pumping levels of 25' or less. Self-priming after the pump housing is initially filled with water. KEY FEATURES Reliable performance at 25' depth to water or less Maximum pressures of 63 PSI and maximum pumping capacities to 5.1 GPM Pump housing is constructed of heavy-duty cast iron and is ready to install 115 volt 1/2 HP Fan cooled, completely enclosed motor 1" Suction Port and 1" Discharge Port WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Cast Iron HORSEPOWER:  1/2 MAXIMUM CAPACITY:  5.6 GPM FLOW at 10' LIFT and 40 PSI:  4.5 GPM MAX LIFT:  25' MAXIMUM PRESSURE:  63 PSI PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1" NPT DISCHARGE PIPE SIZE:  1" NPT AMP DRAW (full load):  7.2 amps VOLTAGE:  115v, 60 Hz RECOMMENDED BREAKER:  15 amp   MAXIMUM WATER TEMPERATURE:  140 F (60 C)

Flotec FP4822 Stainless Steel Shallow Well Jet Pump 3/4 HP Stainless steel shallow well jet pumps are heavy-duty, durable, corrosion resistant, high pressure and offer efficient non-stop operation for years. KEY FEATURES Superior performance at depths to water of 25' or less Heavy-duty, stainless steel pump housing for highest corrosion resistance Ready-to-install 230 volt motor - see manual for 115 volt conversion 1-1/4" NPT suction and 1" NPT discharge pipe sizes WARRANTY 1 year limited warranty  BODY CONSTRUCTION:  Stainless Steel HORSEPOWER:  3/4 MAXIMUM CAPACITY:  11 GPM FLOW at 10' LIFT and 40 PSI:  11 GPM MAX LIFT:  25' MAXIMUM PRESSURE:  52 psi MAXIMUM INLET PRESSURE:   PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT DISCHARGE PIPE SIZE:  NPT AMP DRAW (full load):  7.4 amps on 230v / 14.8 amps on 115v VOLTAGE:  230v / 115v, 60 Hz RECOMMENDED BREAKER:  15 amp on 230v / 20 amp on 115v MAXIMUM WATER TEMPERATURE:  122°F (50 °C)

Flotec FP4832 Shallow Well Jet Pump 1HP Flotec Shallow Well Jet Pump Stainless Steel Construction 1HP 115/230V 1-1/4”NPT Suction x 1” NPT Discharge Ports, up to 18.4GPM at 40psi Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth

Flotec FP4312 Thermoplastic Convertible Jet Pump 1/2 HP Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service. KEY FEATURES Superior performance at depths to water of 100' or less Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance Ready-to-install dual voltage motor preset to 115v - see manual for 230 volt conversion WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/2 MAXIMUM CAPACITY:  9 GPM (shallow well setup) FLOW AT 10' LIFT and 40 PSI:  7.8 GPM (shallow well setup) MAX LIFT:  25' w/ shallow well jet kit / 70' w/ deep well jet kit MAX PSI:  62 psi (shallow well setup) PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" MINIMUM SUCTION PIPE SIZE:  1-1/4" DRIVE PIPE SIZE:  1" DISCHARGE PIPE SIZE:  1" MINIMUM DISCHARGE PIPE SIZE:  3/4" AMP DRAW:  9.9 Amps on 115V / 4.95 Amps on 230V VOLTAGE:  115v/230v, 60 Hz (factory preset to 115v) RECOMMENDED BREAKER:  15 amp   MAXIMUM WATER TEMPERATURE:  140 F (60 C)

Sta-Rite PNC-10 Shallow Well Jet Pump 1/2HP Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 1/2HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 7GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth

Flotec FP4212 Cast Iron Convertible Jet Pump 1/2 HP KEY FEATURES Superior performance at depths to water of 100' or less Rugged, heavy-duty pump housing Ready-to-install dual-voltage 115v/230v motor - see manual for 230 volt conversion Pressure switch pre-wired with 30-50 PSI pressure setting WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Cast Iron HORSEPOWER:  1/2 MAXIMUM CAPACITY:  7.9 GPM (shallow setup) FLOW at 10' LIFT and 40 PSI:  7.1 GPM (shallow setup) MAX LIFT:  25' for shallow setup / 70' for deep setup MAXIMUM PRESSURE:  60 psi (shallow setup) / 54 psi (deep setup) PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT DRIVE PIPE SIZE:  1" NPT DISCHARGE PIPE SIZE:  1"NPT AMP DRAW (full load):  9.9 Amps on 115V / 4.95 Amps on 230V VOLTAGE:  115v/230v, 60 Hz (factory preset to 115v) RECOMMENDED BREAKER:  15 amp   MAXIMUM WATER TEMPERATURE:  140 F (60 C)

Flotec FP5512 Cast Iron Centrifugal Pump 1/2 HP Economical, general purpose centrifugal pumps can be used for water transfer, circulation, fountains, waterfalls, pressure boosting and sprinkling.   FEATURES Superior performance at depths to water of 25' or less Rugged, heavy-duty cast iron pump housing Ready-to-install 230 volt motor (dual voltage)   WARRANTY   1 year limited warranty     BODY CONSTRUCTION:  Cast Iron   HORSEPOWER:  1/2   MAXIMUM CAPACITY:  22 GPM   MAX LIFT:  25'   MAXIMUM DISCHARGE PRESSURE:  36 psi   MAXIMUM INLET PRESSURE:     MAXIMUM TOTAL PRESSURE:     SUCTION PIPE SIZE:  1-1/4" NPT   DISCHARGE PIPE SIZE:  1" NPT   AMP DRAW (full load):  4.7 amps on 230v / 9.4 amps on 115v   VOLTAGE:  230v / 115v , 60 Hz   MAXIMUM WATER TEMPERATURE:  140 °F (60 °C)   RECOMMENDED BREAKER:  15 amp on 230v / 15 amp on 115v

Flotec FPSE3601A Cast Iron Sewage Pump 1/2 HP Rugged, sewage and effluent pumps are capable of handling solids up to 2". Available in cast iron design for a variety of wastewater applications. Heavy-duty, rugged cast iron automatic submersible sewage pump Capable of handling 2" solids - ideal for basement installations, pumping below grade toilets, laundry facilities, underground parking, grain storage and construction sites Includes by-pass float switch for automatic or manual operation   BODY CONSTRUCTION:  CAST IRON HORSEPOWER:  1/2 MAXIMUM CAPACITY:  9000 GPH FLOW AT 10' LIFT:  5400 GPH SWITCH TYPE:  Tethered DISCHARGE PIPE SIZE:  2" NPT MINIMUM PIPE SIZE:  2" for sewage applications / 1-1/2" for effluent applications MAXIMUM SOLID HANDLING SIZE:  2" CORD LENGTH:  10' AMP DRAW:  13 amps VOLTAGE:  115v. 60 Hz RECOMMENDED BREAKER:  20 amp

Flotec FP4855 Shallow Well Jet Kit Ejector Jet Package converts FP4200 series convertible jet pumps for use with shallow well

Flotec FP4875 Shallow Well Jet Kit Use on FP4300 series Flotec convertible jet pump Bolts to nose of pump to convert for shallow well use

Flotec N76-46P Pump Body This is the durable plastic pump body, that is specially designed for use with Flotec shallow well jet pumps.   Replacement pump body N76-46P covers the pump impeller and directs water flow through the pump. This part replaces a worn or damaged body to restore proper pumping.   The Flotec, Simer and Sta-Rite pumps have interchangeable parts. If the part number is the same, it will work in any of the Flotec, Simer and Sta-Rite pumps.

Flotec FP4122 Well Pump 3/4Hp 115/230V Flotec Shallow Well Jet Pump, Cast Iron Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1” NPT Discharge Ports, up to 14.4GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth

Flotec FP0S1250X Water Removal Utility Pump 1/6 HP, 1200 GPH Good, dependable performance marks the Flotec FPOS1250X as the solution for many home dewatering applications.   KEY FEATURES Plastic construction Pumps to 3/16" depth Switch for automatic operation sold separately WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/6 HP MAXIMUM CAPACITY:  1200 GPH FLOW at 10' LIFT:  840 GPH DISCHARGE SIZE:  1" NPT (Female) VOLTAGE:  115v AC, 60 Hz CORD LENGTH:  8' w/ 3-prong grounded plug MAXIMUM WATER TEMPERATUE:  77°F (25°C)