Flotec 3-Wire 4 Inch Submersible Well Pump, 230 Volts 1.5 HP, 10 GPM 4" Submersible Pumps are the most economical, energy-efficient pumps for 4" wells or larger. They provide the optimum amount of water and pressure for general home and farm use. KEY FEATURES For 4" inside diameter or larger wells Pumps from depths of 300ft Floating Stack Design for sand resistance and reduced sand locking Corrosion-resistant stainless steel pump and motor housing WARRANTY 3 year warranty HORSEPOWER:  1-1/2 PERFORMANCE SERIES:  10 GPM VOLTAGE:  230v, 60 Hz NUMBER OF WIRES:  3 plus ground BODY CONSTRUCTION:  Stainless Steel MAXIMUM CAPACITY:  16 GPM OPERATION RANGE:  40' to 300' MAXIMUM DEPTH-TO-WATER:  300' MAX PSI:  170 psi PUMP DIAMETER:  3.78"   DISCHARGE PIPE SIZE:  1-1/4"

Flotec FP2212 2-Wire 4 Inch Submersible Well Pump, 230 Volts 1/2 HP 4" Submersible Pumps are the most economical, energy-efficient pumps for 4" wells or larger. They provide the optimum amount of water and pressure for general home and farm use.   KEY FEATURES For 4" inside diameter or larger wells Pumps from depths of 150ft Floating Stack Design for sand resistance and reduced sand locking Corrosion-resistant stainless steel pump and motor housing   3 year limited warranty HORSEPOWER:  1/2 PERFORMANCE SERIES:  10 GPM VOLTAGE:  230v, 60 Hz NUMBER OF WIRES:  2 plus ground BODY CONSTRUCTION:  Stainless Steel MAXIMUM CAPACITY:  13.6 GPM OPERATING RANGE:  20' to 150' MAXIMUM DEPTH-TO-WATER:  150' MAX PSI:  105 psi PUMP DIAMETER:  3.78" DISCHARGE PIPE SIZE:  1-1/4" NPT RECOMMENDED BREAKER:  10 amp

Flotec FP2211 2-Wire 4 Inch Submersible Well Pump, 115 Volts 1/2 HP 4" Submersible Pumps are the most economical, energy-efficient pumps for 4" wells or larger. They provide the optimum amount of water and pressure for general home and farm use.   KEY FEATURES For 4" inside diameter or larger wells Pumps from depths of 150ft Floating Stack Design for sand resistance and reduced sand locking Corrosion-resistant stainless steel pump and motor housing   WARRANTY   3 year limited warranty     HORSEPOWER:  1/2   PERFORMANCE SERIES:  10 GPM   VOLTAGE:  115v, 60 Hz   NUMBER OF WIRES:  2 plus ground   BODY CONSTRUCTION:  Stainless Steel and Thermoplastic   MAXIMUM CAPACITY:  13.6 GPM   OPERATION RANGE:  20' to 150'   MAXIMUM DEPTH-TO-WATER:  150'   MAX PSI:  105 psi   PUMP DIAMETER:  3.78"   DISCHARGE PIPE SIZE:  1-1/4" NPT     RECOMMENDED BREAKER:  25 amp

Flotec Stainless Steel Waterfall Utility 1/2 HP Stainless Steel construction with a ceramic seal design marks the FPOS4100X as the top of the line in the Flotec Waterfall/utility series of pumps.   KEY FEATURES Complete stainless steel construction - superior corrosion resistance Seal design - allows for continuous operation High performance - ideal for waterfalls and streams WARRANTY 2 year limited warranty BODY CONSTRUCTION:  Stainless Steel HORSEPOWER:  1/2 MAXIMUM LIFT:  30' MAXIMUM CAPACITY:  4100 GPH FLOW at 10' LIFT:  3000 GPM SWITCH TYPE:  No Switch (Manual Operation) DISCHARGE PIPE SIZE:  1-1/4" (ships with Adapter Fittings) AMP DRAW (full load):  7.2 Amps CORD LENGTH:  15' VOLTAGE:  115v AC, 60 Hz MAXIMUM WATER TEMPERATURE:  100°F (38°C)

Flotec FPSE3200A Thermoplastic Sewage Pump Durable, corrosion-resistant thermoplastic construction with 2" solids handling makes the FPSE3200A a great candidate for variety of wastewater applications.   Automatic submersible sewage pump Capable of handling 2" solids - ideal for basement installations, pumping below grade toilets, laundry facilities, underground parking, grain storage and construction sites Durable, corrosion-resistant thermoplastic construction   BODY CONSTRUCTION: Thermoplastic HORSEPOWER: 4/10 MAXIMUM CAPACITY: 5250 GPH FLOW AT 10' LIFT: 2550 GPH SWITCH TYPE: Tethered SWITCH ON LEVEL: 12-1/2" SWITCH OFF LEVEL: 5-1/2" DISCHARGE PIPE SIZE: 2" MINIMUM PIPE SIZE: 2" for sewage applications / 1-1/2" for effluent applications MAXIMUM SOLID HANDLING SIZE: 2" CORD LENGTH: 8' AMP DRAW: 8.5 amps VOLTAGE: 115v, 60 Hz RECOMMENDED BREAKER: 15 amps

Flotec FP217-811 Control Box for 3/4HP Pumps  For use with Flotec Submersible Sump Pump, Model FP3222 Controls the start and run functions  

Flotec FP4122 Well Pump 3/4Hp 115/230V Flotec Shallow Well Jet Pump, Cast Iron Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1” NPT Discharge Ports, up to 14.4GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth

Jabsco 53041-2003-230 Pump 230V 50Hz Heavy Duty Utility 1" Self-Priming Flexible Impeller Pump 230 volt, single phase, 50Hz IP54 Electric Motor, Nitrile oil-resistant impeller   Connections: 1” BSP internal threaded ports Output: up to 9.5 GPM Built-in dry-running protection for up to 30 minutes after initial prime Rapid self-priming from dry up to 2m Will handle hard or soft solids Corrosion resistant bronze body, stainless steel shaft Carbon-ceramic mechanical shaft seal Simple, fully serviceable design with few wearing parts Continuously rated motor

Flotec FP2122 Submersible Well Pump 4" Flotec Submersible Well Pump, for 5" or Larger Wells, Stainless Steel Pump and Motor Housing, 7GPM Series, 2 Wire, 3/4HP 230V, 1-1/4”NPT Port, Water Filled Submersible Motor, Built-in Check Valve, No Control Box Required

Flotec FP2112 Submersible Well Pump 4" Flotec  Submersible Well Pump, for 5" or Larger Wells, Stainless Steel Pump and Motor Housing, 7GPM Series, 2 Wire, 1/2HP 230V, 1-1/4”NPT Port, Water Filled Submersible Motor, Built-in Check Valve, No Control Box Required

Gianneschi MAXI SUB Bilge Pump 230/50 Submersible Bilge Pump for seawater and grey water.   Maxi Sub   230v 50 Hz - 0,18 kW Max flow: 180 L/min @ 2 m Max head: 8 m @ 30 L/min Outlet: 1", female (vertical) Stainless steel shaft (AISI 316) ; ABS open impeller Diameter: 230 mm Height: 350 mm IP rating : IP68

Flotec FP4312 Thermoplastic Convertible Jet Pump 1/2 HP Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service. KEY FEATURES Superior performance at depths to water of 100' or less Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance Ready-to-install dual voltage motor preset to 115v - see manual for 230 volt conversion WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/2 MAXIMUM CAPACITY:  9 GPM (shallow well setup) FLOW AT 10' LIFT and 40 PSI:  7.8 GPM (shallow well setup) MAX LIFT:  25' w/ shallow well jet kit / 70' w/ deep well jet kit MAX PSI:  62 psi (shallow well setup) PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" MINIMUM SUCTION PIPE SIZE:  1-1/4" DRIVE PIPE SIZE:  1" DISCHARGE PIPE SIZE:  1" MINIMUM DISCHARGE PIPE SIZE:  3/4" AMP DRAW:  9.9 Amps on 115V / 4.95 Amps on 230V VOLTAGE:  115v/230v, 60 Hz (factory preset to 115v) RECOMMENDED BREAKER:  15 amp   MAXIMUM WATER TEMPERATURE:  140 F (60 C)

BURKS 7CT5M, Turbine Pump 3/4HP 1PH 115/230v Bronze Fitted Cast Iron Construction. Close Coupled to a 3/4 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor. Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.   UNSPSC Code: 40150000

BURKS 7CT6M, TURBINE PUMP 3/4HP 1PH 115/230v Bronze Fitted Cast Iron Construction. Close Coupled to a 3/4 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor. Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.

BURKS 7CT7M, PUMP 3/4HP 1PH 115/230v Bronze Fitted Cast Iron Construction. Close Coupled to a 3/4 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor. Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.