Black Pinfish Rectangular Trap - 18" x 12" x 8" Features: Heavy-duty vinyl dipped steel mesh Black color offers camouflage Easy access door on rectangular traps Adjustable entry on flat bottom trap 1264-Saltwater Safe

18" x 12" High Performance Trim Tab Kit w/o Switch Kit-12V - Single Actuator Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes. Kit Contents: 2 each of stainless steel trim tab planes 2 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes. The following to be supplied by customer: Boat mounting hardware supplied by customer Actuator extension harnesses (2 for single actuator application or 4 for dual) will be required. To order the lengths of your choice see the Lenco Accessories Section. Specifications: Suggested Boat Length: 20' to 40' Length of Tab: 18" Width of Tab: 12" Minimum Transom Height: 10.5" Blades: 7 Gauge Stainless Steel Finish: Electro-Polished Switch Kit: Sold Separately Switch Required: 10222-211D, 15069-001 or 15070-001  Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

18 x 12 Standard Trim Plane Assembly Bennett trim planes are made of high-quality 304 stainless steel and remain strong and rigid, even in the most challenging situations. Each trim plane assembly includes a trim plane, backing plate and hinge for one side of the boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

1812ATP 18 x 12 Hydraulic Trim Tabs with ATP Hydraulic trim tabs are known for power, precision and durability. Get the most from your boat, no matter what the load, speed or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride and get on plane faster.  Kits Include: (2) Trim plane assemblies (2-4) Hydraulic actuators (1) Hydraulic Power Unit Hydraulic tubing and hardware Helm control (Auto Trim Pro Control) Features: Get on plane fast and stay on plane at intermediate speeds Correct listing and uneven loads Improve visibility and safety Reduce pounding and eliminate porpoising Low maintenance, long-term value and ease of service Exclusive transom mount interlocking tab design Sport batwing option (M80/M120) provides 30% more lift Bottom and piano hinge mounts are available for custom order WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

D-Vec Boat Bag - Large - 18" x 12" x 12" - Grey/Blue  From top to bottom, Daiwa’s Boat Bag is meticulously designed and constructed of only the best materials. Beginning with the outer material, the Boat Bag features an incredibly durable and waterproof marine-grade vinyl. Not water-resistant, but waterproof. The marine quality, the double-zippered top is further protected by a storm flap, enhancing the Boat Bag’s ability to repel water. Below, you’ll appreciate the non-slip, thick EVA padded bottom. The padding adds cushioning for more delicate items like a camera or smartphone.  Size: 18" x 12" x 12"

G-1 Twin Eye Fender 3.5" x 12.8" - Black Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5cm) Eye Diameter - .375" (1cm) Circumference - 11" (27.9cm) Volume - .4 gallons (1.5L) Boat Size - Up to 10' (up to 3M) Weight - .8lbs *Sold as an Individual

Outrigger Black Mesh Carry Bag - 72" x 12" Protects outrigger poles from damage! Nylon mesh bag resists moisture and dual pockets prevent outriggers from scratching each other. Features: Protects outrigger poles from damage Nylon mesh bag resists moisture 74" x 12" black mesh Dual pockets prevent outriggers from scratching each other

G-1 Twin Eye Fender 3.5" x 12.8" - Blue Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5cm) Eye Diameter - .375" (1cm) Circumference - 11" (27.9cm) Volume - .4 gallons (1.5L) Boat Size - Up to 10' (up to 3M) Weight - .8lbs *Sold as an Individual

G-1 Twin Eye Fender 3.5" x 12.8" - White Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5cm) Eye Diameter - .375" (1cm) Circumference - 11" (27.9cm) Volume - .4 gallons (1.5L) Boat Size - Up to 10' (up to 3M) Weight - .8lbs *Sold as an Individual

G-1 Twin Eye Fender 3.5" x 12.8" - Cobalt Blue Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5cm) Eye Diameter - .375" (1cm) Circumference - 11" (27.9cm) Volume - .4 gallons (1.5L) Boat Size - Up to 10' (up to 3M) Weight - .8lbs *Sold as an Individual

G-1 Twin Eye Fender 3.5" x 12.8" - Graphite Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability.  The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Hangs vertically or horizontally  Unique Polyform valve for years of service Technical Specifications: Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5 cm) Eye Diameter - 0.375" (1 cm) Circumference - 11" (27.9 cm) Volume - 0.4 gallons (1.5 L) Boat Size - Up to 10' (3 M) Weight - .7 lb *Sold as an Individual

G-1 Twin Eye Fender 3.5" x 12.8" - Sand with Adapter Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability.  The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Hangs vertically or horizontally  Unique Polyform valve for years of service Technical Specifications: Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5 cm) Eye Diameter - 0.375" (1 cm) Circumference - 11" (27.9 cm) Volume - 0.4 gallons (1.5 L) Boat Size - Up to 10' (3 M) Weight - .7 lb In the Box: Fender Inflation Adapter  *Sold as a Kit

G-1 Twin Eye Fender 3.5" x 12.8" - Sand  Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability.  The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Hangs vertically or horizontally  Unique Polyform valve for years of service Technical Specifications: Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5 cm) Eye Diameter - 0.375" (1 cm) Circumference - 11" (27.9 cm) Volume - 0.4 gallons (1.5 L) Boat Size - Up to 10' (3 M) Weight - .7 lb *Sold as an Individual 

G-1 Twin Eye Fender 3.5" x 12.8" - Pink Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability.  The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Hangs vertically or horizontally  Unique Polyform valve for years of service Technical Specifications: Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5 cm) Eye Diameter - 0.375" (1 cm) Circumference - 11" (27.9 cm) Volume - 0.4 gallons (1.5 L) Boat Size - Up to 10' (3 M) Weight - .7 lb *Sold as an Individual 

G-1 Twin Eye Fender 3.5" x 12.8" - Classic Red Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability.  The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Hangs vertically or horizontally  Unique Polyform valve for years of service Technical Specifications: Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5 cm) Eye Diameter - 0.375" (1 cm) Circumference - 11" (27.9 cm) Volume - 0.4 gallons (1.5 L) Boat Size - Up to 10' (3 M) Weight - .7 lb *Sold as an Individual