|
Propane & Gasoline Sensor with Cable - Red Plastic Housing
Gasoline & propane sensor with 12" lead and 20' sensor cable.
Compatible With:
G-1 Gasoline Fume Detector
G-2 Gasoline Fume Detector
P-1 Propane Fume Detector
P-2 Propane Fume Detector
*Sold as an Individual
|
148.50 |
|
|
Propane & Gasoline Sensor with Cable - Aluminum Housing
Gasoline & propane sensor with 12" lead and 20' sensor cable.
Compatible With:
G-1 Gasoline Fume Detector
G-2 Gasoline Fume Detector
P-1 Propane Fume Detector
P-2 Propane Fume Detector
*Sold as an Individual
|
163.50 |
|
|
Propane Fume Detector w/Plastic Sensor & Solenoid Valve - Black Bezel Display
Detect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions.
Features/Specifications:
2-3/16" Round Black Display with LEDs & Silence/Test Button
Solenoid Valve & Adapter
Solenoid Valve Control Button
Automatically Closes Solenoid Valve
68 dBA Alarm will sound & Red LED will light at 20% of the LEL
Simple Installation
9-30VDC
Operating Temperature: -40°F to 185°F (-40°C to
85°C)
Reverse Polarity Protected
Current Draw @ 12VDC: Nominal:55mA / Maximum:725mA
|
337.50 |
|
|
Propane Fume Detector w/Plastic Sensor - No Solenoid Valve - Black Bezel Display
Detect Propane leaks early to prevent personal injury and possible explosions.
Features/Specifications:
2-3/16" Round Black Display with LEDs & Silence/Test Button
68 dBA Alarm will sound & Red LED will light at 20% of the LEL
Simple Installation
9-30VDC
Operating Temperature: -40°F to 185°F (-40°C to 85°C)
Reverse Polarity Protected
Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA
|
277.50 |
|
|
Propane Fume Detector w/Plastic Sensor - No Solenoid Valve - Chrome Bezel Display
Detect Propane leaks early to prevent personal injury and possible explosions.
Features/Specifications:
2-3/16" Round Chrome Display with LEDs & Silence/Test Button
68 dBA Alarm will sound & Red LED will light at 20% of the LEL
Simple Installation
9-30VDC
Operating Temperature: -40°F to 185°F (-40°C to 85°C)
Reverse Polarity Protected
Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA
|
285.00 |
|
|
Propane Fume Detector w/Automatic Shut-Off & Plastic Sensor - No Solenoid Valve - Black Bezel Display
Detect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions.
Features/Specifications:
2-3/16" Round Black Display with LEDs & Silence/Test Button
68 dBA Alarm will sound & Red LED will light at 20% of the LEL
Simple Installation
9-30VDC
Operating Temperature: -40°F to 185°F (-40°C to
85°C)
Reverse Polarity Protected
Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA
|
285.00 |
|
|
Propane Fume Detector w/Automatic Shut-Off & Plastic Sensor - No Solenoid Valve - Chrome Bezel Display
Detect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions.
Features/Specifications:
2-3/16" Round Chrome Display with LEDs & Silence/Test Button
68 dBA Alarm will sound & Red LED will light at 20% of the LEL
Simple Installation
9-30VDC
Operating Temperature: -40°F to 185°F (-40°C to
85°C)
Reverse Polarity Protected
Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA
|
292.50 |
|
|
Propane Fume Detector w/2 Plastic Sensors - No Solenoid Valve - Square Black Bezel Display
Detect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions.
Features/Specifications:
2-5/8" Square Black Display with LEDs & Silence/Test Button
68 dBA Alarm will sound & Red LED will light at 20% of the LEL
Simple Installation
9-30VDC
Operating Temperature: -40°F to 185°F (-40°C to
85°C)
Reverse Polarity Protected
Current Draw @ 12VDC: Nominal:55mA / Maximum:780mA
For use with existing solenoid valve & adapter
|
412.50 |
|
|
Gasoline & Propane Sensor Only
This sensor is a replacement for Fireboy-Xintex P systems.
Installation:
The sensor should be located by the propane-powered appliance, near the floor
Avoid areas where damage may take place due to cleaning, mopping, kicking, or other physical damage
Harsh chemicals should not be used to clean sensors
Use the appropriate #8 mounting hardware to mount the Propane Fume Sensor in the desired location
The rubber gasket should be installed between the sensor and the mounting surface
Connect to the extension cable using the attached quick-disconnect connectors (Sold Separately)
|
112.50 |
|
|
Propane Fume Detector, 2 Channel, 2 Sensors, Solenoid Valve & Control & 20' Cable - 24V DC
Propane has become the fuel of choice for cooking and heating.
Highly BTU-efficient and readily available, propane is becoming more and more a part of power boating, sailing, and camping. The Xintex® line of propane products includes everything you need for outfitting a complete and safe propane system.
Propane is heavier than air and can settle below deck and in the bilge where it can be detonated by an engine start-up or electrical spark of any kind. Xintex® Propane Fume Detectors will alarm when fumes reach 18-20% LEL.
*Includes Time Sensor Valve
|
495.00 |
|
|
Propane Fume Detector with Plastic Sensor & Solenoid Valve - Chrome Bezel Display
Detect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions.
Features:
2-3/16" Round Chrome Display with LEDs & Silence/Test Button
Solenoid Valve & Adapter
Solenoid Valve Control Button
Automatically Closes Solenoid Valve
68 dBA Alarm will sound & Red LED will light at 20% of the LEL
Simple Installation
9-30VDC
Operating Temperature: -40°F to 185°F (-40°C to 85°C)
Reverse Polarity Protected
Current Draw @ 12VDC: Nominal: 55mA/Maximum: 725mA
|
345.00 |
|
|
Fixed Heat Detector with Base
The Fireboy-Xintex Heat Detector uses a single thermistor to sense the air temperature around the detector. This heat detector was designed to detect how fast the temperature is increasing.
Features:
163°F Fixed Heat Detector
Housing: White flame-retardant polycarbonate
Terminals: Nickel-plated stainless steel
Ideal in environments that are dirty or smoky
Unaffected by wind or atmospheric pressure
Remote test feature
Specifications:
Detection Principle: Measurement of heat using a thermistor
Sampling Frequency: Once every four seconds
Supply Voltage: 8.5 V dc to 33 V dc
Supply Wiring: Two wire supply, polarity sensitive
Power-up Time: < 20 seconds
Minimum: ‘detector active’ voltage: 6 V
Holding Voltage: 5 V - 33 V
Minimum Holding Current: 8 mA
Minimum Voltage to Light Alarm LED: 5 V
Alarm Reset Voltage: < 1 V
Alarm Reset Time: One second
Alarm Indicator: Integral indicator with 360º visibility
Operating & Storage Temperature: -40ºC to +70ºC
Operation:
Open-web casing that enables air to flow freely across a thermistor which measures the air temperature every two seconds
A microprocessor stores the temperatures and compares them with pre-set values to determine whether a fixed upper limit - the alarm level - has been reached
Detectors the microprocessor uses algorithms to determine how fast the temperature is increasing
|
112.50 |
|
|
Propane Fume Detector & Alarm w/2 Plastic Sensors & Solenoid Valve - Square Black Bezel Display
Detect propane leaks early and automatically shut off gas supply to prevent personal injury and possible explosions.
Features/Specifications:
2-5/8" Square Black Display with LEDs & Silence/Test Button
Solenoid Valve & Adapter
Solenoid Valve Control Button
Automatically Closes Solenoid Valve
68 dBA Alarm will sound & Red LED will light at 20% of the LEL
Simple Installation
9-30VDC
Operating Temperature: -40°F to 185°F (-40°C to
85°C)
Reverse Polarity Protected
Current Draw @ 12VDC: Nominal:55mA / Maximum:780mA
|
487.50 |
|
|
MA Series Fire Extinguishing System - 450 Cubic Feet
Fireboy-Xintex clean agent fire extinguisher systems are designed to automatically discharge whenever the protected space's ambient temperature reaches 175 degrees Fahrenheit.
When the Fireboy System discharges, the extinguisher is designed to fully empty the HFC-227ea (Heptafluoropropane) and 3M Novec Clean Agent in less than 10 seconds. No clean-up is required. There is no powdery residue or water left behind. The fire is extinguished by a combination of heat reduction and chemical reactions.
*Diesel-powered craft require installation of an Engine Shutdown System
Features:
Protects engine rooms and machinery spaces
Pre-engineered, total flooding system
The safest way to combat an engine room fire
Automatic discharge at 175°F (79°C) with optional manual release
Utilizes HFC-227ea and 3M Novec clean agents – an effective Halon replacement
No water or powdery residue
Includes locking lever for increased safety when removing or installing cable
Certifications:
U.S.C.G.
EN ISO 9094-1 and 9094-2 standards
ISO RINA
MCA Certified
Factory Mutual
Technical Specifications:
Volume Protected - 450 ft3
Dimensions (Dia. x H) - 7.1" x 19.4" (18 x 49.3 cm)
Agent - HFC-227ea and 3M Novec
Agent Weight - 19.4 lbs (8.8 kg)
System Pressure (@70°F) - 240 psi
In the Box:
Fire extinguisher
Mounting bracket
Helm station panel - 90107
Owners manual
*Sold as an Individual
|
1293.75 |
|
|
CO Alarm 12/24V DC - Black
A Carbon Monoxide (CO) detector should be installed in each accommodation space. Small crafts or RV's with an open design may require only one (1) detector for adequate protection. If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.
The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels. Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb). COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage. The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.
The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.
*Long sensor life – approximately 7 year end-of-life (EOL)
Features:
Microprocessor controlled
Compact design for inconspicuous protection
Time-weighted average CO measurement process constantly monitors all CO levels
Highly resistant to most chemicals, solvents & cleaners
CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries
Technical Specifications:
Power Usage - 4 mA
Alarm Point - 10% COHb
Alarm Horn - 85 dBA
Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
Interconnect Functionality - No
*Sold as an Individual
|
120.00 |
|