RayNet to RJ45 - 100' RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays. The RayNet connector is used for connecting network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector. Features: RayNet to RJ45 100'

Raynet to RJ45 Female Adapter 100mm This adapter has a RayNet Female connector at one end, and a RJ45 Female Gland connector at the other end. The Gland makes the RJ45 Female socket watertight. A typical use for this cable would be to convert a RJ45 Digital Radar Cable to a RayNet Radar Cable so you can connect the cable directly into the new HS-5 Network Switch or directly into the back of an ace or gS Series multifunction display.

RayNet to RJ45 Male Cable - 1m RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays. The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector. Features: 1m (3.28ft.) RayNet to SeaTalkhs (RJ45) cable The Raynet (F) to RJ45 Ethernet (M) adapter can be used to connect new a, c, e or gS-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch. When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a RJ45 radar scanner cable, DSM or thermal camera for direct-connection to an HS5 network switch, or MFD RayNet port.

RayNet to RJ45 Male Cable - 10M Part #: A80159 RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays. The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector. Features: 10M (32.81') RayNet to SeaTalkhs (RJ45) cable

RayNet RA to RJ45 Cable - 100' RayNet Right Angle to RJ45 100' Cable

RayNet (female) to RJ45 Male Cable - 3m RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays. The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector. Features: 3m (9.84 ft.) RayNet to SeaTalkhs (RJ45) cable

M332 Stabilized Thermal IP Camera Pairing a rugged, all-weather design with one of the most advanced FLIR thermal imaging cores, the M332 deliver awareness-enhancing thermal vision for law enforcement, commercial, and recreational applications. Advanced gyro-stabilization and high-performance thermal imaging detect obstacles and targets in complete darkness and heavy seas, allowing safe navigation in the most challenging conditions. SAFE NAVIGATION IN LOW VISIBILITY ENVIRONMENTS  Thermal imaging offers vision in complete darkness, glare, and light fog. Powered by the breakthrough FLIR Boson thermal imaging core Thermal resolution 320x256 VOx Microbolometer Smooth image refresh rates up to 30 Hz Pan/Tilt Adjustment Range360° Continuous Pan, +/- 90° Tilt Advanced onboard image processing technology ClearCruise Augmented Reality-enabled when paired with Raymarine Axiom MFDs A STEADY VIEW IN ROUGH SEAS Stable viewing in heavy seas keeps eyes on-target.  Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw Integrated AHRS (Attitude Heading Reference Sensor) Horizontal stabilization automatically keeps the camera on scene as you maneuver SEAMLESS INTEGRATION Exceptional connectivity with navigation and security systems. Optional joystick control unit and multifunction navigation display integration (JCU2) ONVIF-compliant for PTZ security camera functionality H.264 IP video stream, HD-SDI lossless, and analog video output Included: M300 Camera Camera base-seal Camera gasket RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.) Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.) Right-angled HD-SDI video cable (with BNC connectors) 3 m (9.8 ft.) Right-angled power/NMEA 0183/video cable 3 m (9.8 ft.) Mounting riser 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs 2 x self-adhesive decals (for ball-down mounting only) Documentation pack

M364 Stabilized Thermal IP Camera Pairing a rugged, all-weather design with one of the most advanced FLIR thermal imaging cores, the M364 deliver awareness-enhancing thermal vision for law enforcement, commercial, and recreational applications. Advanced gyro-stabilization and high-performance thermal imaging detect obstacles and targets in complete darkness and heavy seas, allowing safe navigation in the most challenging conditions. SAFE NAVIGATION IN LOW VISIBILITY ENVIRONMENTS  Thermal imaging offers vision in complete darkness, glare, and light fog. Powered by the breakthrough FLIR Boson thermal imaging core Thermal resolution 640 x 512 VOx Microbolometer Smooth image refresh rates up to 30 Hz Pan/Tilt Adjustment Range360° Continuous Pan, +/- 90° Tilt Advanced onboard image processing technology ClearCruise Augmented Reality-enabled when paired with Raymarine Axiom MFDs A STEADY VIEW IN ROUGH SEAS Stable viewing in heavy seas keeps eyes on-target.  Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw Integrated AHRS (Attitude Heading Reference Sensor) Horizontal stabilization automatically keeps the camera on scene as you maneuver SEAMLESS INTEGRATION Exceptional connectivity with navigation and security systems. Optional joystick control unit and multifunction navigation display integration (JCU2) ONVIF-compliant for PTZ security camera functionality H.264 IP video stream, HD-SDI lossless, and analog video output Included: M300 Camera Camera base-seal Camera gasket RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.) Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.) Right-angled HD-SDI video cable (with BNC connectors) 3 m (9.8 ft.) Right-angled power/NMEA 0183/video cable 3 m (9.8 ft.) Mounting riser 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs 2 x self-adhesive decals (for ball-down mounting only) Documentation pack

M364C Stabilized Thermal IP Camera PREMIUM MULTISPECTRAL MARINE CAMERAS WITH ACTIVE GYRO-STABILIZATION Featuring a high-definition low light camera and one of the most advanced FLIR thermal imaging cores, the M364C provides an elite level of awareness on the water. This camera uses multispectral imaging to deliver exclusive FLIR Color Thermal Vision™(CTV)  technology when used with Raymarine Axiom™ MFDs. Color Thermal Vision blends visible camera details with a thermal image, overlaying vital color imagery that allows captains to positively identify navigation aids and other vessels within the thermal scene. Outstanding imaging performance and enhanced gyro-stabilization make the M364C indispensable tools for law enforcement professionals, commercial mariners, and serious recreational boaters.  ELITE AWARENESS WITH MULTISPECTRAL IMAGING Thermal and visible imaging featuring FLIR Color Thermal Vision and MSX® FLIR Boson 640 × 512 thermal sensor Thermal imaging detects objects in complete darkness, glare, and light fog Integrate the M364C with Raymarine Axiom and take advantage of FLIR Color Thermal Vision and MSX multispectral imaging Color Thermal Vision blends thermal and the low light visible camera so captains can easily identify color details like navigational lights and navigation aids HIGH DEFINITION NAVIGATION Low light HD visible imaging sensor and long-range zoom offer enhanced target identification. Better than binoculars, the M364C with 30x optical zoom and image stabilization delivers superior long-range imaging and positive target identification Ultra-low light camera technology provides visible imagery in the most challenging lighting conditions Overlay AIS targets, chart objects, and waypoints in real time when combined with Raymarine Axiom and award-winning ClearCruise™ augmented reality technology  A STEADY VIEW IN ROUGH SEAS Steady, stable viewing in heavy seas keeps eyes on-target.  Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw Horizontal stabilization automatically keeps the camera positioned in the same direction as the vessel turns Integrated AHRS (Attitude Heading Reference Sensor) Included: M300 Camera Camera base-seal Camera gasket RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.) Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.) Right-angled HD-SDI video cable (with BNC connectors) 3 m (9.8 ft.) Right-angled power/NMEA 0183/video cable 3 m (9.8 ft.) Mounting riser 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs 2 x self-adhesive decals (for ball-down mounting only) Documentation pack

M364C LR Stabilzed Thermal/Visible Long Range IP Camera PREMIUM MULTISPECTRAL MARINE CAMERAS WITH ACTIVE GYRO-STABILIZATION Featuring a high definition low light camera and one of the most advanced FLIR thermal imaging cores, the M364C provide an elite level of awareness on the water. This camera use multispectral imaging to deliver exclusive FLIR Color Thermal Vision™(CTV)  technology when used with Raymarine Axiom™ MFDs. Color Thermal Vision blends visible camera details with a thermal image, overlaying vital color imagery that allows captains to positively identify navigation aids and other vessels within the thermal scene. Outstanding imaging performance and enhanced gyro-stabilization make the M364C indispensable tools for law enforcement   professionals, commercial mariners, and serious recreational boaters.  ELITE AWARENESS WITH MULTISPECTRAL IMAGING Thermal and visible imaging featuring FLIR Color Thermal Vision and MSX® FLIR Boson 640 × 512 thermal sensor Thermal imaging detects objects in complete darkness, glare, and light fog Integrate the M364C with Raymarine Axiom and take advantage of FLIR Color Thermal Vision and MSX multispectral imaging Color Thermal Vision blends thermal and the low light visible camera so captains can easily identify color details like navigational lights and navigation aids HIGH DEFINITION NAVIGATION Low light HD visible imaging sensor and long-range zoom offer enhanced target identification. Better than binoculars, the M364C with 30x optical zoom and image stabilization delivers superior long-range imaging and positive target identification Ultra-low light camera technology provides visible imagery in the most challenging lighting conditions Overlay AIS targets, chart objects, and waypoints in real time when combined with Raymarine Axiom and award-winning ClearCruise™ augmented reality technology  A STEADY VIEW IN ROUGH SEAS Steady, stable viewing in heavy seas keeps eyes on-target.  Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw Horizontal stabilization automatically keeps the camera positioned in the same direction as the vessel turns Integrated AHRS (Attitude Heading Reference Sensor) Included: M300 Camera Camera base-seal Camera gasket RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.) Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.) Right-angled HD-SDI video cable (with BNC connectors) 3 m (9.8 ft.) Right-angled power/NMEA 0183/video cable 3 m (9.8 ft.) Mounting riser 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs 2 x self-adhesive decals (for ball-down mounting only) Documentation pack

M232 Pan/Tilt 9Hz Marine Thermal Camera The FLIR M232 marine thermal camera is the smallest and most affordable pan and tilt marine thermal night vision camera. Using the latest generation Boson(TM) thermal core, the M232 lets boaters see at night in 320 x 240 thermal resolution and also features 2x digital zoom. When the M232 is combined with a Raymarine Axiom MFD, FLIR’s ClearCruise™ intelligent thermal analytics technology offer boaters an entirely new level of awareness and safety. The M232 also uses IP video technology and simplifies installation by eliminating extra video signal cables. The M232 offers features 2X digital zoom capability. Make Navigation Safer The M232 improves navigation and safety by helping you see bridges, docks, buoys, and other vessels, night and day. The M232 also helps boaters find people in the water faster than using spotlights and radar alone. Long-Range, Optimized Viewing M232 features full 320x240 resolution for optimal horizon-to-horizon viewing, and 2X digital zoom for long-range performance. Easy to Install on any Vessel The combination of the M232’s small, lightweight design and IP video connectivity make it a snap to install and integrate with multiple MFDs. Enhanced Awareness with ClearCruise™ Combine M232 with a Raymarine Axiom MFD and take advantage of ClearCruise™ intelligent thermal analytics. ClearCruise™ provides audible and visual alerts when “non-water” objects such as boats, obstacles, or navigation markers are identified in the scene. Specifications: Detector Type: 320 × 240 VOx Microbolometer Video Refresh Rate: 9 Hz Field of View: 24° × 18° E-Zoom: 2x Image Processing: FLIR Proprietary Digital Detail Enhancement Thermal Resolution: 320 x 240 resolution for clear, detailed images Ethernet-Enabled: For simple integration with your other electronics Zoom: 2x e-Zoom for extended range performance Pan & Tilt: M232 with adjustable pan and tilt System Specifications: Pan/Tilt Range Pan: 360deg (continuos), Tilt: +110°, -90° Image Processing: FLIR Propriety Digital Detail Enhancement™ Video Output: H264 IP Video stream Power Requirements: 12 or 24 VDC Power Consumption: 15W (typical) 18W (max) What’s In the Box:  Every M132 and M232 thermal camera includes: Camera unit Top down riser kit Thermal camera base-seal Right-angled RayNet to RayNet cable, 32 feet (10 meters)  RayNet to RJ45 adapter cable, 4-inches (100mm)  Right-angled 3-pin power cable, 32 feet (10 meters)  Stainless steel mounting hardware kit *Notes: JCU3 joystick controller and IP to analog video decoder sold separately. When the M132/232 cameras are set for either Ball Down or Mirror Image configurations, the Clear Cruise feature is unavailable. This is due to the nature of the algorithm that supports this function and its relationship to the orientation of the horizon. At this time, there is no scheduled date on which this will be remedied.

M300C Stabilzed Visible IP Camera Combining  a  high-performance  visible  marine  camera  with  long-range optical zoom capability, the M300C offers positive target  identification  for  law  enforcement,  commercial, and  recreational applications. Advanced gyro-stabilization provides steady imaging in rough sea conditions and allows the M300C to monitor targets or hazards over long distances continuously.  Exceptional low light performance from the M300C gives captains enhanced awareness once the sun dips below the horizon.  HIGH DEFINITION NAVIGATION Low light HD visible imaging sensor and long-range zoom offer enhanced target identification. Better than binoculars, the M300C with 30x optical zoom and image stabilization delivers superior long-range imaging and positive target identification Ultra-low light camera technology provides visible imagery in the most challenging lighting conditions Overlay AIS targets, chart objects, and waypoints in real time when combined with Raymarine Axiom and award-winning ClearCruise™ augmented reality technology A STEADY VIEW IN ROUGH SEAS  Stable viewing in heavy seas keeps eyes on-target.  Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw Electronic stabilization minimizes low frequency rumble and vibration Integrated AHRS (Attitude Heading Reference Sensor) Horizontal stabilization automatically keeps the camera on scene as you maneuver SEAMLESS INTEGRATION Exceptional connectivity with navigation and security systems.  Optional joystick control unit and integration with multifunction navigation displays (JCU2) ONVIF-compliant for PTZ security camera functionality H.264 IP video stream and HD-SDI lossless digital video interface Composite analog video (SD) for integration into legacy displays Included: M300 Camera Camera base-seal Camera gasket RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.) Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.) Right-angled HD-SDI video cable (with BNC connectors) 3 m (9.8 ft.) Right-angled power/NMEA 0183/video cable 3 m (9.8 ft.) Mounting riser 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs 2 x self-adhesive decals (for ball-down mounting only) Documentation pack

RayNet Adapter Cable - 100mm - RayNet Male to RJ45 Raymarine's RayNet male to RJ45 adaptor cable. RayNet Raymarine’s current generation system replaces the RJ45 connector with a waterproof vibration tolerant twist pin connector that is designed for the marine environment.

SeaTalkhs Crossover Coupler For networking only two devices, choose the SeaTalkhs crossover coupler. The Raymarine SeaTalkhs Crossover coupler provides a secure, waterproof means to join together SeaTalkhs Ethernet cables with RJ45 male connections. The Crossover Coupler is also handy when adapting SeaTalkhs devices like radar scanners for direct-connection to new generation multifunction displays. Use it along with the A62360 RayNet to RJ45 adapter to create a direct-connect RayNet plug.

2M RayNet to RayNet Cable for e & c Series