|
Power Over Ethernet Injector - 12V
FLIR's 12V Power Over Ethernet Injector is a key component in connecting your FLIR maritime thermal imaging camera to an Ethernet-equipped Joystick Control Unit.
|
189.46 |
|
|
8 Channel 4K Recorder for IP Cameras Only - Power Over Ethernet
Record from and manage up to eight cameras at resolutions up to 3840 x 2160 with the NRL Series 8-Channel 8MP NVR with 2TB HDD from Speco Technologies. It is equipped with a SATA port that supports an HDD up to 14TB (2TB preinstalled). H.265 and H.264 compressions keep file sizes manageable while maintaining the best quality possible. Two-way audio communication is supported.
This NVR supports simultaneous HDMI and VGA outputs, as well as up to 10 users. It complies with ONVIF version 2.3 for interoperability with cameras that are ONVIF compliant.
Features:
Eight PoE ports
Two USB ports
4K UHD HDMI video output
Easy video export via USB
Built-in S.M.A.R.T (Self-Monitoring, Analysis and Reporting Technology for HDD)
Smart Search with Speco Smart analytic cameras (available separately)
Compatible with most cameras that comply with ONVIF profile S
Plug-and-play feature with isolated traffic on PoE ports with Speco IP cameras (available separately)
EZ Wizards simplify use and setup
Find and install IP cameras on the local network without the need to locate the cameras manually
Instant playback for individual channels directly from the live view screen
Create bookmark pins on playback for easy reference
Customizable channel view placement
Smart analytics include abandoned object detection, missing object detection, and line crossing
Recording modes include analytics, continuous, motion, sensor, schedule, and manual
Alarm trigger events include recording, PTZ, alarm out, pop-up alarm preview, email, FTP, snapshot, buzzer & screen tips
Free US-based DDNS and P2P services
Compatible with Internet Explorer, SecureGuard VMS, and Speco Blue app for iOS and Android
|
447.00 |
|
|
JCU-2 Joystick Control Unit & POE Injector Kit
JCU-2 Joystick Control Unit
The joystick is the primary control for the M400 & M400XR and the new M300 series (M300C, M332, M364, M364C, and M364C LR. It is used to wake the system or put it in standby, operate the pan and tilt movement, zoom the camera, control cameras modes and features, and configure system settings by means of OSD menus.
Includes
Joystick Control Unit (JCU2)
Mounting hardware
Power Over Ethernet Injector - 12V
FLIR's 12V Power Over Ethernet Injector is a key component in connecting your FLIR maritime thermal imaging camera to an Ethernet-equipped Joystick Control Unit.
Includes:
JCU-2 keypad
Keypad mat
Mounting gasket
4 x mounting screws, rubber washers, mounting clamps
Cable gland nut
RJ45-to-RJ45 Ethernet cable, 7.6 m (25 ft)
Documentation pack
POE injector
|
1626.71 |
|
|
JCU-1 Joystick Control Unit & Poe Injector Kit
The M-Series controller is simple to use, provides precise system control, and lets users access all of the important camera functions with push-button controls.
Controller Functions:
Heated LCD screen - Instantly displays system status
User-programmable "hot key" for commonly used functions
Scene selection allows the operator to optimize the system's performance for specific situations - Night Running, Day Running, Night Docking, and Man Overboard
User-selectable color palettes change the video display mode for easier viewing based on operator preference
User-programmable Home button allows the operator to point the pan/tilt camera to pre-defined positions with the push of a button
Precision proportional pointing control is provided through a custom, sealed, 8-way iDrive style control knob
Backlit for easy nighttime readability; the sealed buttons are easy to see and provide positive tactile feedback
The controller is fully sealed for survival in a maritime environment, and meets IPx6 standards
Install as many control stations around your vessel as you want, thanks to the system's easy Ethernet connectivity
Power Over Ethernet Injector - 12V
FLIR's 12V Power Over Ethernet Injector is a key component in connecting your FLIR maritime thermal imaging camera to an Ethernet-equipped Joystick Control Unit.
|
1052.23 |
|
|
Four Channel Uplink Power Over Ethernet Switch - IEEE802.3af & 3at Compliant - 9-30VDC Input - 48VDC Output
The new PoE4v2 from Iris Innovations is a four-channel plus uplink power over Ethernet switch that operates over a wide DC input voltage range of 930VDC making it perfect for powering IEEE802.3af/3at devices from battery sources such as boats and vehicles.
The PoE4v2 outputs 48 VDC to your PoE device with a power budget of 60W in total and up to 30W per port, providing power to up to 4 devices at 15W each, 2 devices at 30W each, or 1 device at 30W, and further 2 devices at 15W.
The unit features a passive uplink port to enable connections to other network switch equipment, routers, or modems.
The PoE4v2 simplifies your installation as only a single network cable is required to connect and power your devices, reducing cost and adding convenience.
Features:
Compact and robust housing
Wide input voltage range of 930VDC
Perfect for boats and vehicles
60W power budget
IEEE802.3af / 3at compliant
Up to 30W per channel
Plug and play operation - no configuration required
48VDC PoE output voltage to your devices
Provides power to devices up to a 100-meter cable length
Simplifies installations
Specifications:
Weight & Dimensions: 0.350 Kg / 115 mm x 32 mm x 95 mm
Material: Aluminium, soft anodized
PoE Ports / Standard: Ports 14 IEEE802.3af / 802.3at + 1 Uplink Port (non PoE)
Total PoE Budget: 60W across 4 PoE Ports
Maximum Cable Length: 100 Meters
Approvals / Standards CE, UKCA, FCC, IC, REACH, RoHS, WEEE / EN IEC 62368:12020+A11:2020 EN60945:2002 Section 9 & 10
Input Voltage Range: 9 30 VDC
Output Voltage: 48 VDC
Power Consumption Idle: 0.8W / Max: 2.2W / PoE Max: 106W
Environmental: IP30 - Install in a dry dust free environment. Do not expose to moisture.
|
254.04 |
|
|
Flir Deluxe Dual Station Accessory Kit for M-Series
Includes:
Joystick control unit with weather cover, 25' shielded ethernet cable (RJ-45), 25' video cable, 50' video cable, video amplifier/splitter, Qty 2 12V power over ethernet injector, and mounting hardware
|
1301.50 |
|
|
Flir Standard Dual Station Accessory Kit for M-Series
Includes:
Joystick control unit with weather cover, 25' shielded ethernet cable (RJ-45), Qty 2 12V power over ethernet injectors, and mounting hardware.
|
1117.31 |
|
|
Single Channel PoE Injector - 8-36VDC Input Voltage & 48VDC Output
Simplify your installation by only running a single CAT5 cable to your IP camera or other PoE network device.
The IRIS-PoE1 is a compact single-channel power over Ethernet (PoE) injector designed and certified, especially for use in marine applications. Simply connect your camera or PoE device with a single CAT5 cable to the injector and connect the injector to your onboard network. The IRIS-PoE1 uses high-end buck-boost power management to facilitate IEEE802.3aF PoE operation across an extremely wide 6–36VDC input range, making it perfect for environments where input voltage may not be stable or where the required 48VDC is not available.
Features:
Inject DC power into a single device
Wide Voltage range – 6-36VDC Input
Delivers up to 48VDC
IEEE802.3af Compliant
Small form factor with molded fixing points
Simple to install and reliable, the IRIS-PoE1 features plug-and-play functionality and requires no setup.
Specifications:
Dimensions (millimeter): 92mm x 84mm x 38mm
Weight (grams): 144g
Connections:
CAT5 device in / output to network, a 4-pin screw terminal for DC input
Input Voltage: 8-36VDC
Power: 16.8W
The IRIS-PoE1 Gigabit Ethernet Injector has been fully certified to comply with the following standards for use in the marine industry:
IEEE802.3af EN60945 EN55022 (Class B) EN50155
UL1950, XSA 22.2
|
113.76 |
|
|
Weather Cover for Joystick Control Unit
FLIR's Joystick Control Unit Weather cover is a protective covering for the Joystick Control Unit of your maritime thermal imaging camera. It is designed to protect your Joystick Control Unit (JCU) from the dangers of the open ocean. Built specifically for marine use, JCU Weather Cover has been designed by FLIR to guard against salty spray, moisture, and other irritants that could potentially damage your thermal camera's Joystick Control Unit. You should always put this thermal imaging accessory on your JCU when it is not in use to prevent possible damage. Keep it operating smoothly by using the FLIR Weather Cover.
Features:
Protective covering
Protects the electronics of your Joystick Control Unit (JCU)
Guards against moisture, salt and other irritants found in marine environments
|
18.47 |
|
|
Miniature Marine PTZ Dome Camera - Stainless Bezel - Hi-Def Ethernet IP - 10x Digital Zoom - 4 in 1 Video Format
The IRISx106 range of multi-format miniature, controllable cameras are the smallest marine PTZ cameras available on the market and provide fast, smooth variable speed control in a variety of formats to suit your requirements.
The IRIS106 features a high-resolution camera sensor that can be switched to output analog (CVBS), AHD, HD-TVI, and HD-CVI video formats depending on your requirement. In analog mode (default) the camera will connect directly to all MFDs that feature a composite video input to provide a crisp, clear video image. Set the camera to HD-TVI and connect via one of our Hybrid recorders or TVIHDMI encoders and you will achieve 1080P High Definition video in real-time compatible with MFDs that feature digital (HDMI / DVI) inputs.
The camera can be controlled by our IRIS595 joystick controller, TE01 rotary controller, or via an Iris HVR interface. Data communication to the camera is achieved via a two-wire RS485 serial data connection.
The camera housing is designed to be as small as possible, simplifying installation and fitting in discreetly with the boat's aesthetic, unlike other large, unsightly marine PTZ cameras. The body of the camera is made from lightweight but tough ABS plastic, and the dome is cast from smoke acrylic. The camera housing is finished off with a marine-grade stainless steel bezel available in high polish (standard). A surface mount bracket is also available for the camera (Part Number: BRK106), facilitating installation directly onto a bulkhead. This is often used when installing in engine rooms where it is not possible to recess mount the device.
Because of its small size and sleek design, the IRIS4106 can be used for deck, companionway, and tender monitoring, engine room monitoring, and as part of your onboard surveillance system. In summary, the 4106 is a very versatile, robust, and controllable marine PTZ camera.
Features:
Marine Grade 316 Stainless Case
The smallest PTZ dome available (86 mm)
IP
Huge compatibility
Easy installation & low power
Stylish high-polished finish
Fast, responsive pan, tilt, and zoom operation
Specifications:
Lens (millimeter): F1.8 / F=4.9mm 49mm
Image Sensor (inch): 1/4” Omnivision OV9712
Image Processing: H.264 Video Codec, Dual Stream 1-30fps adjustable
Effective Pixels: 921,600
Resolution: 1080P/720P
Min Illumination: 0.1 Lux (Colour) / 0.01 Lux (B/W)
Illumination: NA
IR Distance: 10m
Day / Night: Auto / Day / Night
S/N Ratio: >50dB
Optical Zoom: 10x
Digital Zoom: 10x
Wide Dynamic Range: Supported
BLC: Supported
3D DNR: Supported
Mirroring: Horizontal Flip / Vertical Flip
AGC: 0-32
Pan Details: 360-degree Continuous Rotation / Speed 0.5300-degree sec
Tilt Details: 0 90-degree / Speed 0.5300-degree sec
Network: Ethernet RJ45 (10/100 Base-T)
Protocol: TCP/UDP/HTTP/MULTICAST/UPnP/NTP/ RTSP/ONVIF-S 2.4
Power over Ethernet: Supported
P2P: Supported
Smart Phone: Android / iOS
Compatibility: PC-Based Systems. For the latest MFD compatibility please contact IRIS
Max Users: 32 Users
Power: +12VDC / PoE IEEE802.3aF
Power Consumption: 1A Max
Operating Temperature: -35-degrees C + 60-degrees C
Dimensions (millimeter): Bezel OD = 154mm, Panel Cutout = 122mm, Depth Behind Panel = 58mm (For IRIS4106 model additional space should be allowed for RJ45 Connector), Draft = 73mm
Ingress Protection: IP66
Weight: 1.1Kg
Material: 316L Stainless Steel Bezel, Polycarbonate Dome, ABS Plastic Housing
|
1422.00 |
|
|
Maritime Terminal for Inmarsat Fleet One Service
Intellian Fleet One is the perfect terminal for Inmarsat’s Fleet One service which enables simultaneous voice and data connectivity up to 150 Kbps. Intellian Fleet One ensures resilient and reliable connectivity at sea.
The Intellian Fleet One is simple and easy to install and use. The lightweight antenna can be carried onboard easily and only a single RF cable ensures a reliable connection.
Features:
Simultaneous voice and data
Built-in firewall for data security
505 emergency calls which in an emergency directs a call straight through to an MRCC
Maritime safety terminal support
Built-in aptusLX intuitive management tool
2 LAN ports with PoE (power over ethernet)
Technical Specifications:
ADU (Above Deck Unit) Dimensions - 291.1 x 294.5 mm / 11.5" x 11.6"
ADU (Above Deck Unit) Weight - 4.9 kg / 10.8 lbs
BDU (Below Deck Unit) Dimensions - 280 x 190 x 41 mm / 11.0″ x 7.5″x 1.45″
BDU (Below Deck Unit) Weight - 1.2 kg / 2.6 lbs
DC Input - 10.8-30 VDC
Power (Max) - 120w
Tx Frequency - 1626.5 MHz - 1675.0 MHz
Rx Frequency - 1518.0 MHz 1559.0 MHz
WiFi - 802.11 b/g
In the Box:
ADU (Above Deck Unit)
BDU (Below Deck Unit)
Coaxial Cable
Quick Installation Guide
Installation Template
DC Power Cable
Ethernet Cable
|
3162.49 |
|
|
AC Power Supply 20/25A, 12V Out, 85-265V In
The PWI320 Intelligent Power Supply delivers a full 300 watts of output power for communications, control or a wide variety of other devices. It is fully Digital Signal Processor controlled and feature Universal Input Voltage from 85 to 265 VAC at 50 or 60 Hz with Active Power Factor Correction for the most efficient use of AC power.
The Power Supply is preset to the same voltage as a fully charged battery of the nominal output voltage (ie. 13.6V for a 12V model, etc.). The voltage can be adjusted over a reasonable range using the front panel controls, or the PowerWizard software that is free to download from www.analyticsystems.com.
Seven dual color LEDs clearly indicate output current levels as well as indicating faults with the Power Supply. Safety features include Power Supply over temperature shutdown, current limiting, short circuit protection, input under voltage shutdown and output overvoltage protection all with automatic recovery. PWI320MW model available with MIL connectors, extra input and output filtering and sealed to IP66
Features:
Digital Signal Processor controlled
Universal worldwide AC input
Computer programmable
Simple front panel controls
Easy connection to loads
High Vibration Rugged Duty
Dry Contact Output Fail Relay Carrying Handle
Canbus / RS232 / Remote Control port
Five year parts and labour warranty
|
583.51 |
|
|
Desktop Switching Power Supply - 120VAC Input, 12V Output, 10 Amp
This high efficiency UL-60950-1 approved AC-DC power converter provides a highly regulated output DC voltage of 13.8 Volts at 10 Amps with an AC input of 120 Volts, 60 Hz (230 Volts, 50 Hz model also available). These advanced switch-mode DC power supplies were designed specifically for use with land mobile radio. The power supplies produce clean reliable power and are highly filtered to suppress RFI. The unit comes with a detachable power supply cord with NEMA 5-15P plug. Features include over-current, short-circuit and over-voltage protection. The AC-DC power supply conforms to FCC Part 15(B), class B digital device.
Features:
Advanced switch-mode technology
Reliable power with minimum weight and size
Circuit innovations minimize output voltage ripple and RFI
Input voltage can be set at 120VAC or 240VAC (internal jumper)
UL listed to both USA & Canadian safety standards
Specifications:
Input: 100-130 VAC
Output: 13.8 VDC
Amps: 10 Amps
Fuse: 3 Amps
Weight: 3.4 (lbs)
Weight: 1.54 (kg)
Dimensions: 8.19 x 7.28 x 2.4 (in)
Dimensions: 20.8 x 18.5 x 6.1 (cm)
Safety: UL, FCC
Warranty: 3 Year Limited
Applications:
Two way radio base stations
Communications systems
Security systems
Test equipment
Plotters
GPS receivers
Automotive & Marine displays
DC computers
12 Volt lighting systems
OEM applications
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
121.91 |
|
|
Masthead Light f/Sail or Power Less Than 20M - 12VDC - Black Base Mount/White Light
Features:
Black Plastic with Stainless Steel Mounting Bracket
Bulb Included
Certified for use on Sail or Power Driven Vessels Under 20 Meters (65.6 ft.) in Length.
3 Miles Visibility
12VDC
|
104.40 |
|
|
APT-F-150-01 Aluminum PowerTower® Radar Mount - 6" Forward Leaning
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
B & G - HALO 20, 20+, 24 radars
Garmin - Fantom 18, 24, GMR18HD, GMR18xHD, GMR24HD, GMR24xHD, GMR40 radars
Humminbird - HB 2124 CHIRP radar
KVH - TracPhone V3-HTS, M2, M3, TV3, V3 radars
Lowrance - 3G/4G radars
Raymarine - Quantum (Q24C), Quantum 2 (Q24D) radars
Simrad - 3G/4G, DX45, DX60, DX54-S, GB40, NX40, NSE 8/12 radars
Sitex - RADARpc 3.5/4.5 radars
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
A range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 5.91" (150mm)
Mounting Type - Forward leaning - 33°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
307.13 |
|