RJ45 Waterproof Connector FLIR's RJ45 waterproof connector is a key component for installing and operating your maritime thermal camera from FLIR. The RJ45 waterproof connector connects the thermal camera itself to the Joystick Control Unit (JCU) using an Ethernet cord, transmitting both data and electricity along a single cord. FLIR has designed the RJ45 waterproof connector with a standard RJ45 port, and it is PoE enabled so you can connect it directly to your JCU without having to use a PoE Injector. It is designed with a sturdy waterproof enclosure to protect against the elements, meaning the connector won't be the weakest link in your thermal imaging chain. You can't control your thermal camera without FLIR's RJ45 waterproof connector.

2-Way Waterproof Connector Features: Pair of wire connectors with one (1) Male and one (1) Female connector ends each 18 Gauge wire Waterproof *Sold as a Pair

3-Way Waterproof Connector Features: 3 Wire connector with one (1) Male and one (1) Female connector end 18 Gauge wire Waterproof *Sold as an Individual

6-Way Waterproof Connector Features: 6 Wire connector with one (1) Male and one (1) Female connector end 18 Gauge wire Waterproof *Sold as an Individual

Light Bar for M100 & M200 FLIR for M2 Mounts Only - Must Pick LTB Top A 2” diameter Light Bar designed to work with FLIR M100/M200 Series. Contact Seaview directly to make sure this light bar is right for your boat. Not intended for fast ocean going boats. Will not work with 24” satdomes. This will clear 20” satdomes or smaller

Waterproof USB Cable - 5M (16') USB cable for the AISWatchMate 850, AISWatchMate Vision, and XB-8000 transponders 5M (16') USB cable with a waterproof connector that twists locks into the USB socket on a Vesper Marine transponder and has a standard PC USB connector for your laptop. Because it locks into place it won't fall out due to vibration or shock. Features: 1 x Waterproof mini connector (IPx7 rated) 1 x Standard USB-A PC connector 5M (16') in length

LTBSF3 Light Bar for Thermal Camera FLIR M300 Series for M2 Mounts Only - Must Pick a LTB Top Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters and etc. What's also unique with Seaview light bars is that they can fold over 90° to allow for extra height clearance. The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Many Styles There are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights. 

MKR-US2-16 Lowrance 9-Pin TotalScan ADP for TI2 HDS Universal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Adapter connects your Lowrance Elite Ti2 and HDS fish finder with a Universal Sonar 2 transducer on your trolling motor.  Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference.  Features: Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference

Universal Sonar 2 Adapter Cable Garmin Adapter Cable for Echo Series Universal Sonar delivers streamlined, interface-free sonar performance and DualBeam PLUS technology for best view of the waters below. This adapter connects your motor to your Garmin echo series with waterproof connectors.

MKR-US2-15 Lowrance 8-Pin Tripleshot ADP for Hook2 Universal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Adapter connects your Lowrance Hook2 fish finder with a Universal Sonar 2 transducer on your trolling motor. Features: Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference

NMEA2000 Cable with 6M Micro F-Drop Features: NMEA2000 Cable 6 Meter Micro F-Drop Single Ended With 1 Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Soft Pack for Genz Pack Vexilar Soft Packs are designed to enclose and protect your ice fishing system investment. Each is made from heavy-duty polyester canvas. The Genz Soft Pack fits all Genz Packs and GC-100 carry case. This model uses Velcro panels to enclose the system. Two large pocket on each side let you keep items close at hand. Features: Waterproof Bottom Helps protect the Pack; Rear velcro door for easy transducer access; Dual side mesh storage pockets; Heavy-duty handle design; Easily slips around your Genz Pack.  Specifications: Made from heavy-duty polyester canvas All metal zippers Window is cold crack tested to -30 Degree F One Year Warranty Features: Waterproof Bottom Helps protect the Pack Rear velcro door for easy transducer access Dual side mesh storage pockets Heavy-duty handle design Easily slips around your Genz Pack WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Autopilot Control Unit (ACU) The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type. Drive Current Output Maximum continuous 5 Amps at supply voltage Drive Clutch Output No clutch connection Connections Includes the M81105 Rotary Rudder Reference Sleep switch Power Solenoid drive out / return Ground Nominal supply voltage 12 V or 24 V Operating voltage range 10.8V to 31.2V dc Power Consumption (standby) - Main Power Supply 300 mA (12/24V) Power Consumption (standby) - SeaTalkng Power Supply 20 mA (12V) SeaTalkng LEN (Load Equivalency Number) 1 SeaTalkng Power Out 3 Amp at 12V (fuse protected at 3 Amp) Data Connections SeaTalkng Installation Environment Operating Temperature: -20°C to +55°C (-4°F to +131°F) Storage Temperature: -30°C to +70°C (-22°F to +158°F) Relative Humidity: MAX 93% Waterproof rating Drip resistant Dimensions (W x H x D) 285mm x 211.5mm x 64.5mm (11.2 in x 8.3 in x 2.5 in) Weight 2.2kg (4.84lbs) Conformance Europe: 2004/108/EC Australia and New Zealand: C-Tick, Compliance Level 2

Groco 504-F Washer  

Groco 12V-F 12V Motor 1/8Hp 3.5" Shaft