Outboard Motor Lock Features: Heavy-duty key lock mechanism for maximum security Mounts on most outboard motors Foam filler insert reduces noise and vibration WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

HD Turnbuckle Outboard Motor Lock Features: This outboard lock fits the turnbuckle design and has anti-theft by drill protection Constructed of high strength 300 series marine grade stainless steel Includes noise dampeners to reduce rattle Complete with two security keys that cannot be duplicated

Outboard Motor Lock Features: The Panther Outboard Lock is a heavy carbon steel design and fits turnbuckle-mounted engines It has a recessed solid brass lock and noise dampeners that reduce rattle

Teak Swim Platform with 2-Step Telescoping Ladder for Boats with Inboard/Outboard Motors Features: 304 S.S. Hardware Platform Dimensions: 18"W (back) 17"W (front) x 15"D x 1-5/16" thick Includes Mounting Hardware Assembly required

Teak Swim Platform with 3-Step Telescoping Ladder for Boats with Inboard/Outboard Motors Features: 304 S.S. Hardware Platform Dimensions: 18"W (back) 17"W (front) x 15"D x 1-5/16" thick Includes Mounting Hardware Assembly required

Swim Platform Outboard Motor Bracket Built extra-tough and extra-wide for auxiliary motors. The mounting board is 2” thick weatherproof and maintenance-free polypropylene. Adjustable for long or short shaft engines. Position trim adjustment available by moving bolts on bracket. Rated for outboards up to 20 HP. Features: Adjustable outboard motor bracket designed to mount on most swim platforms Rated for 2- and 4- stroke motors up to 20HP Constructed of black powder-coated aluminum and can be adjusted to fit most platform heights and motor shaft lengths for optimum prop depth and performance Comes complete with a transom support bar for weight support and torque resistance Do NOT use without Panther 55-0415 safety cable – included

Motor Stik OutBoard Motor Support Stick - Pair Features: Fits Over Trim Rams Supports Your Outboard While Trailering Takes the Pressure Off of Hydraulic System Most Outboards 150hp and Up Strong Aluminum Tubing with Molded Ends Safe for Salt or Fresh Water Note: Some Yamaha motors have a grease fitting on the port side ram. Use a single Motor Stik™ on the starboard side only in this application. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Outboard Motor Bracket - Stainless Steel - Max 10HP Stainless Steel Outboard Motor Bracket Up to 10 horse power. The Adjustable outboard motor bracket is stainless steel construction and non-corrosive for saltwater use. Designed for use with power or sail boats. Manual operation means no power required to raise and lower your auxiliary outboard motor. Features Stainless Steel Construction Fits Motors up to 10 horse power at 110 pounds.14" travel.

Happy Troller - Large Plate Large Troller: Fits inboard/outboards plus all outboard motors 50 hp and larger. For the Fisherman who thinks he has everything! Slows even big motors down to that "ever-so-slow" fish tantalizing speed. A significant invention in the sport of troll fishing, Happy Troller® mounts on the anti-cavitation plate to allow fine control of trolling speed. At cruising speed, your boat's stability is enhanced. Locks in "down" position for trolling. Locks in "up" position for cruising. Happy Troller is the answer to correct trolling speed. Use it year-round in all boating activities; salt and fresh water. Key Features: Reduces troll speed in "down" position Acts as a stabilizer in "up" position Maintains stability in bow-light boats Smooths out ride in rough water Reduces porpoising and cavitation Made of only highest quality stainless steel and marine aluminum; clear anodized aluminum finish Installs in 15 minutes Stainless steel mounting hardware and installation & operating instructions provided with each unit

Outboard Motor Bracket - Aluminum - Max 12HP Adjustable outboard motor bracket is designed for motors up to 12hp or 82lbs. This light weight aluminum bracket is designed for freshwater use on both powerboats and sail boats. Features: Same design as the 55-0021. This heavy duty, lightweight aluminum bracket is designed for motors up to 12hp or 82lbs max weight Spring loaded (14”of travel with 5 stops)  Do not use without Panther safety cable 55-0415—NOT included) Not to be used with 4 stroke engines

Marine Outboard Motor Bracket - Aluminum - Max 15HP 4-Stroke Adjustable outboard motor bracket is designed for 2- and 4-stroke motors up to 15 HP or 132 lbs. Constructed of hard-coat anodized aluminum and hand adjustable with the turn of a knob. Stainless steel torsion springs counterbalance the motor weight making adjustments a breeze. 10" of travel and 5 vertical running positions let you fine tune the motor height for optimal performance. Meets ABYC Standards. (Do not use without Panther 55-0415 safety cable—included.)

Chesapeake Black SS Boxed Set - Outboard Motors Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.  Packaged and ready for the display counter.  This 4 Gauge Boxed Sets offer a complete set of gauges ready to install. Outboard Motors Boxed Set Includes: Speedometer (60 MPH) (Mechanical) Tachometer (7000 RPM) Fuel Level Voltmeter (10-16 VDC) Specifications: Anti-scratch glass lens 12 VDC negative ground Dual Scale - Imperial and Metric Factory P/N KTF004 *Sold as a Box Set **Gauge Covers not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Chesapeake WHite SS Boxed Set - Outboard Motors Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.  Packaged and ready for the display counter. This 4 Gauge Boxed Sets offer a complete set of gauges ready to install. Outboard Motors Boxed Set Includes: Speedometer (60 MPH) (Mechanical) Tachometer (7000 RPM) Fuel Level Voltmeter (10-16 VDC) Specifications: Anti-scratch glass lens 12 VDC negative ground Dual Scale - Imperial and Metric Factory P/N KTF002 *Sold as a Box Set **Gauge Covers not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Dress White Boxed Set - Outboard Motors Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. Packaged and ready for the display counter.  This 4 Gauge Boxed Set offers a complete set of gauges ready to install. Outboard Motors Boxed Set Includes Speedometer (55 MPH) (Mechanical) Tachometer (7000 RPM) Fuel Level (E-1/2-F) Voltmeter (10-16 VDC) Factory P/N KT9794 *Sold as a Box Set **Gauge Covers not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Euro Black Boxed Set - Outboard Motors Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer, and flat glass lens. Packaged and ready for the display counter. This 4 Gauge Boxed Set offers a complete set of gauges ready to install. Outboard Motors Boxed Set Includes: Speedometer (55 MPH) (Mechanical) Tachometer (7000 RPM) Fuel Level (E-1/2-F) Voltmeter (10-16 VDC) Factory P/N KT9796 *Sold as a Box Set **Gauge Covers not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.