|
Heavy "D" PRODOCK Profile
(3) 8' pieces - 24' White
All Dock Egde PRODOCK Profiles have molded-in UV Inhibitors & Fungicides
Our PRODOCK Profiles are the ultimate in Heavy-Duty cushioning and offer years of protection for your boat.
PRODOCK commercial grade Heavy Duty vinyl profiles have a smooth high-gloss finish and are manufactured with 100% virgin material with UV Inhibitors and Fungicides.
PRODOCK Profiles will retain their resilience in all weather conditions and resist discoloration, mildew, salt water, hardening and tearing. Ideal for use in marinas and larger commercial applications
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
120.59 |
|
|
Heavy "P" PRODOCK Profile
(3) 8' pieces - 24' White
All Dock Egde PRODOCK Profiles have molded-in UV Inhibitors & Fungicides
Our PRODOCK Profiles are the ultimate in Heavy-Duty cushioning and offer years of protection for your boat.
PRODOCK commercial grade Heavy Duty vinyl profiles have a smooth high-gloss finish and are manufactured with 100% virgin material with UV Inhibitors and Fungicides.
PRODOCK Profiles will retain their resilience in all weather conditions and resist discoloration, mildew, salt water, hardening and tearing. Ideal for use in marinas and larger commercial applications
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
120.59 |
|
|
Dock Edge Stainless Steel Profile Fasteners 100 pcs. 1"
Stainless Steel will prevent unsightly staining caused by rusting or regular steel fasteners. Recommended for use with all Profiles.
Robertson driver bit included.
Product Specifications:
Part No.: 1006-F
Description: Mounting Screws & Drivers, SS, (100 Pc/Pk)
|
21.26 |
|
|
Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-3/8 Part # 0115-0064-0300 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-3/8 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
2.3 GPM
8.7 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/8"OD
Outlet
3/8"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0300
|
227.18 |
|
|
Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-3/8 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-3/8 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
2.3 GPM
8.7 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/8"OD
Outlet
3/8"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
|
205.73 |
|
|
Mooring Snubber Kit with 3/8" x 20' Dock Line
This flexible snubber stretches to absorb shock and protect boats, cleats, and lines from the strain of wind and water. The resilience of the snubber can be adjusted to conditions by increasing or decreasing the amount of line wrapped around it. Includes snubber and 20 ft. of solid braided multifilament polypropylene dock line.
Specifications:
Thickness (inch): 3/8"
Length (feet): 20'
Color: Blue
|
17.39 |
|
|
Oberdorfer N992Rm-F01 White Gear Pump 3/8" 1/3Hp
|
1201.82 |
|
|
Groco 037-075-8 Lip Shaft Seal, 3/8"
|
6.14 |
|
|
Yamada FR-3 3/8" Filter-Reg 20 Series
|
187.85 |
|
|
March 1A-MD 3/8 Mag Drive Pump
March Pump's industrial 1A-MD-3/8 is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.5 Feet (or around 2PSI). The 1A-MD-3/8 pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, and Stainless Steel. When submerged, Epoxy, Noryl, and the SJT Cord are also in contact with the solution. The inlet connection is 3/8 inch smooth, and the outlet is 3/8 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.005 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 160 Celsius in open air, or 87 Fahrenheit or 71 Celsius if submerged. The March 1A-MD-3/8 centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals.
Perfect for Applications Including
Applications for the 1A-MD-3/8 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
Great for Chemicals Including
The 1A-MD-3/8 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The 1A-MD-3/8 may have been modified to handle these chemicals.
Type: Centrifugal Mag Drive
Inlet: 3/8"OD
Outlet: 3/8"OD
Wet End: Polypropylene (Front Housing, Rear Housing, Impeller), Buna N (O-Ring), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft)
Uses: Submersible or Open Air
When submerged, the following is also in contact with the solution, Epoxy, Noryl, SJT Cord
|
319.80 |
|
|
PRODOCK Heavy "D" Dock Profile - 3x8' Sections - Beige
This exceptionally strong profile is further reinforced by two internal supports. like all DockEdge+ profiles, it is constructed of marine grade flexible PVC, developed not to chip or crack under normal usage. Unaffected by oil, gas or salt water. UV and fungus inhibitors prevent fading, yellowing, deterioration from sunlight and unsightly blotching.
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
120.59 |
|
|
PRODOCK Heavy "P" Dock Profile - 3x8' Sections - Beige
This exceptionally strong profile is further reinforced by two internal supports. like all DockEdge+ profiles, it is constructed of marine grade flexible PVC, developed not to chip or crack under normal usage. Unaffected by oil, gas or salt water. UV and fungus inhibitors prevent fading, yellowing, deterioration from sunlight and unsightly blotching.
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
120.59 |
|
|
Dock Edge Dockguard Economy PVC Profile 10ft. Roll - White
The economy Dock Guard co-extruded Profile can be used in light to medium duty applications. It features a raised lip for gunwale protection on Ski and Bass boats. Fabricated from Marine Grade PVC with UV Inhibitors and Fungicides.
Product Specifications
Part No.: 1135-F
Descriptions: Dock Guard Profile, (10 ft/bag), White
|
23.04 |
|
|
"C" Guard
(4) 6' Sections - 24' - White
The economy "C" Guard co-extruded Profiles are made to exacting standards from Marine Grade PVC with UV Inhibitors and Fungicides. Ideal for light to medium duty applications, they will not crack or distort with temperature extremes and come in easy to install 6' lengths. It can be used on flat surfaces as well as on pilings.
|
55.82 |
|
|
Dock Edge Standard "D" PVC Profile 16ft Roll - White
This versatile and strong profile without a lip can be mounted vertically or horizontally anywhere on the dock face. Great for pilings too. Made of Marine Grade PVC with UV Inhibitors and Fungicide. Packaged in easy to use rolls for fewer joints.
Product Specifications:
Part No.: 1190-F
Description: "D" Profile, (16 Ft/Roll), White
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
57.26 |
|