J-BASE for WindTrak 15 This optional mount for WindTrak 15 provides more versatility and reduces overall weight aloft by 15 grams when substituted for standard WindTrak 15 mounting base. The J-Base comes with two #10 (5 mm) selftapping screws. Drill a pilot hole in mast, apply silicone sealant or Locktite® and screw into mast. Installation of J-Base can also be accomplished by tapping the mast for 3/16" (5 mm) machine screws or by using epoxy putty to affix base to the mast

J-Base for WindTrak 10.Sport for Side, Top or Front of Mast Mounting Allows for side, top, or front mounting on most masts, on big boats or dinghies alike. Standard with the WindTrak 10.Sport, J-Base™ can be ordered as an option for WindTrak 15. Standard with the WindTrak 10.Sport, J-Base™ can be ordered as an option for WindTrak 15. Allows for side, top, or front mounting on most masts, on big boats or dinghies alike. J-Base is made of glass filled polycarbonate, 2″ (5 cm) long. Includes stainless steel set screw and (2) #10 self-tapping screws. Reduces overall weight by 15 grams when substituted for standard mounting base on WindTrak 15.

Spare Vane Only f/WindTrak 15

No-Drill™ Vehicle Laptop Base f/97-15 Ford Expedition The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. Compatible Vehicles: Ford Expedition (1997-2015) Ford Expedition King Ranch EL (2013) Ford Expedition Limited (2013) Ford Expedition Limited EL (2013) Ford Expedition Ranch EL (2013) Ford Expedition XLT (2013) Ford Expedition XLT EL (2013) Ford F-150 (1997-2003) Ford F-150 Heritage (2004) Ford F-250 Light Duty (1997-2004) Ford Windstar (2004-2007) Specs & Features Placement of Mount: Passenger side floor board, under seat Drilling Requirements: No - uses existing seat bolts Seat Configuration: Bucket/bench Pole: Purchased Separately Material: Powder Coated Steel Features: One 4" riser is included with this vehicle base. Step feature allows minimized amount of intrusion of passenger leg space. This base will not interfere with factory installed console in most installations.

Universal Masthead Mount Extend your WindTrak 10.Sport or WindTrak 15 vane away from masthead obstructions and turbulence. The 13" (33 cm) arm comes with hardware allowing side or top mounting and offset angles up to ±20 degrees. May be attached securely to flat, curved, vertical, horizontal, or inclined surfaces. Gain space aloft and improve mounting position of wind finders and other equipment. Mount on the back of the mast for easier viewing from the cockpit. The mount adapts to virtually every masthead situation. Features: Length 13" (33 cm) Weight 3.2 oz (90 g) Boom can be shortened if necessary; complete instructions included Can be used with WindTrak Light #3200. Also accommodates Davis J-Base Mounts (using #10 stainless steel screws and nuts, not included)

Spare Vane Only f/WindTrak 10.Sport

WindTrak 15 WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system. WindTrak is the perfect choice for all cruising and racing boats 15' (4.6 meters) and bigger. Reflector tape on the vane and tacking tabs make WindTrak 15 easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! WindTrak 15 has a 15" (38 cm) vane. Includes through-bolt or drill and tap mounting socket; 5/16" -18 stainless stud, washers and nut. Stands 12.75" (32 cm) tall and weighs just 3.6 ounces (101 g). A bird-proof spike extends another 10" (24 cm) above the vane to discourage birds from landing.

Oval Head Closed Base Rod Holder - 15° - 9" Heavy duty oval head closed end base, with drain hole to accept 1/4" NPT pipe to hose fitting Head Size: 3.28" x 4.06" Length: 9" Angle: 15° Head Inner Diameter: 1-5/8"

RAM® Rail Clamp Ball Base for 1.25" - 1.875" Rails The RAM-D-271U-12, round pipe base, consists of a 2.25" rubber ball connected that will connect to a pipe tubing diameter from 1.25" to 1.875" in diameter.  Specifications: Hardware Included: (2) 1/4"-20 x 1.5" Screws, (2) 1/4"-20 Nylock Nuts, (2) Rubber Caps  Clamp Range: 1.25" - 1.875" diameter Ball/Socket Size: D Size (2.25") Weight Capacity: 6 lbs Materials: Marine-Grade Aluminum

RAM® Rail Clamp Ball Base for 2" - 2.5" Rails The RAM-D-271U-2, round pipe base, consists of a 2.25" rubber ball connected that will connect to a pipe tubing diameter from 2" to 2.5" in diameter.  Specifications: Hardware Included: (4) 1/4"-20 x 1.5" Screws, (4) 1/4"-20 Nylock Nuts, (4) Rubber Caps  Clamp Range: 2" - 2.5" diameter Ball/Socket Size: D Size (2.25") Weight Capacity: 6 lbs Materials: Marine-Grade Aluminum

Round Head Closed Base Rod Holder - 15° - 9" Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT pipe to hose fitting. Head Size: 3.85" Length: 9" Angle: 15° Head Inner Diameter: 1-5/8"

Blind Mount Round Head Closed Base Rod Holder - 15° - 9" Eliminate fastening from the top of flange and enhance the look of your gunnel With drain hole to accept 1/4" NPT pipe to hose fitting Head Size: 3.84" Length: 9" Angle: 15° Head Inner Diameter: 1-5/8"

Oval 2-Pin Base f/Angled Pole - Black Part #: 91022-7 These 2-pin bases for angled pole lights with locking collars are well-suited for rough conditions or long poles. Features a soft rubber cover with a molded-in gasket to protect the socket from moisture and debris when pole light is stowed away. Provides a 2-pin socket and a 7.5 degree angle and installs on narrow gunwales or deck areas. Completely non-corrosive, they feature contacts which are nickel-plated to resist corrosion and multi-crimped for durability, and wire leads tinned for corrosion resistance. Features: Oval 2-Pin Base specifically for angled pole Black WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Perko Rectangular Plug-In Base f/Pole Cards - Chrome Plated Zinc/Black Features: Plain black cap, chrome plated zinc alloy Black polymer base Pigtail leads Fits 1343, 1348, 1400, 1451 and 1470 Series All-Round Pole Lights Specs: Number of Pins: 2 Base Dimensions: 3-3/4" x 1-5/8" Tube Angle: 16° Screw Size: 8

No-Drill™ Laptop Base f/ The Dodge RAM 1500-5500 - 2008-2015 Specifications/Features Compatible Vehicles: Dodge RAM 1500-5500 (2008-2015) Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board. Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Pole: Purchased Separately Weight: 2.1 lbs. Material: Powder Coated Steel Features: Quick installation with no drilling needed. Rock solid construction with lifetime warranty. Low profile keeps mount away from passenger leg space. Won't interfere with levers or factory-installed console or 4WD lever. Designed to accommodate trucks with PTO