WindTrak Light (for 3100/3150) Light up the reflector tabs and vane on your WindTrak for easy viewing at night with WindTrak Light. Waterproof and non-corroding silver parts give long-life at just 120 ma current draw. Fits under WindTrak 15, WindTrak 10 or J-Base™ mounting socket.

Universal Masthead Mount Extend your WindTrak 10.Sport or WindTrak 15 vane away from masthead obstructions and turbulence. The 13" (33 cm) arm comes with hardware allowing side or top mounting and offset angles up to ±20 degrees. May be attached securely to flat, curved, vertical, horizontal, or inclined surfaces. Gain space aloft and improve mounting position of wind finders and other equipment. Mount on the back of the mast for easier viewing from the cockpit. The mount adapts to virtually every masthead situation. Features: Length 13" (33 cm) Weight 3.2 oz (90 g) Boom can be shortened if necessary; complete instructions included Can be used with WindTrak Light #3200. Also accommodates Davis J-Base Mounts (using #10 stainless steel screws and nuts, not included)

WindTrak 10 Sport Wind Vane With the introduction of the WindTrak 10 Sport, WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia van, and easy-to-read, fully adjustable tacking tab system. Reflector tape on the vane and tacking tabs make WindTrak 10 Sport easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! WindTrak 10 Sport has a 10" (25 cm) vane. Includes glass reinforced polycarbonate J-Base for side, top or front of mast mounting on most dinghies, smaller boats and sport boats. Stands just 9.25" (23.5 cm) tall and weighs 1.2 ounces (31 g).

WindTrak 15 WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system. WindTrak is the perfect choice for all cruising and racing boats 15' (4.6 meters) and bigger. Reflector tape on the vane and tacking tabs make WindTrak 15 easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! WindTrak 15 has a 15" (38 cm) vane. Includes through-bolt or drill and tap mounting socket; 5/16" -18 stainless stud, washers and nut. Stands 12.75" (32 cm) tall and weighs just 3.6 ounces (101 g). A bird-proof spike extends another 10" (24 cm) above the vane to discourage birds from landing.

WindTrak AV Antenna Mount Wind Vane WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system. WindTrak AV installs onto most whip antennas, including Metz and Shakespeare brands, with a whip diameter less than 1/8" (3 mm). Combine two installations into one to reduce masthead clutter, weight, and windage aloft. Rides on low-friction Teflon® bearings. Complete with 15" (38 cm) vane, reflective tacking arms, hardware and instructions for easy installation. Antenna not included.

  Hydro Glow Fishing Lights manufactures high quality, energy efficient, waterproof lights for both above the water and underwater applications.  Hydro Glow Fishing Lights utilize high output LEDs for great fish attracting capability.   S1 Ultra Thin Solar Deck Light Proven Hurricane Tough Body Material: High Impact Polycarbonate Power Supply: USA made High Efficient Solar Panel Battery: Lithium Ion 3.7v/340mah LEDs: 6 USA made LEDs Colors: White, Green, Blue & Red Visual Distance: 500M Working Temperature: -20C (-4F) Life Expectancy: 5 Years Waterproof: IP68 Totally Submersible Size: 4.5" x 3.5" x .4"   SF100G/SF100B - Green & Blue SeaFloor Underwater Lights  The SeaFloor Series of underwater lights are our  "anchored to the bottom" style lights.  This means the light fixture floats so a weight is required to hold the light in the desired location and depth.  The SF100G comes with a 50 foot cord, a 120v to 24v power supply to provide safe current to the light and an array of high output, green LEDs for maximum output and energy efficiency.  The SF100G underwater light is designed to be deployed so the light fixture is floating about 3 feet below the surface.  Because there are no special transformers, ballasts and other parts, there is no need for an electrician.  Simply attach a small weight (about 2 pounds) on the cord, drop it in the water and plug it up.    Installation takes about 5 minutes.  As with all our dock lights, we recommend turning off any other white lights on the dock.  You will be amazed at the amount of fish you will see with the SF100G. Safe low voltage current, very bright and energy efficient best describes theh SF100G, a truely green product.      HG3216G - 4' Long 12VDC Green LED Fishing Light  The HG3216G underwater fishing light is made of deep water fishing.  It is 48 inches long and designed to be deployed right off the side of the boat.  When it submerges to the desired depth simply tie or clamp the cord to a rail or cleat.  The HG3216G features 648, high-output, green LEDs, 20' cord, two amp draw, 4,000 lumen and is virtually unbreakable.  The HG3216G underwater fishing light is perfect for deep ocean and deep lake fishing.  It is commonly used for catching swordfish, tuna, squid, snapper, grouper and many species of bait.  It is also a favorite for deep water freshwater fishing for striped bass, walleye, crappie and lake trout.   HG45 Premium Deep Water Fishing Light  HG45 is very compact, only 5" high and 3" in diamenter.  It is easily stowed in a glove compartment.  The design is for illumination on 4 sides horizontal as well as vertical.  The HG45 is perfect for those overnight offshore trips as well as deep water inshore fishing.  It comes with a 20' cord and alligator clips.  If deepwater fishing is your thing then the HG45.       Specials    Closeouts   Remanufactured    Rebates  

WindTrak AV Spare Vane Only

D-XL PRO - Specter-Driving LED - Pair - Black With the enormous popularity of the original D-Series came the need for a slightly larger, more powerful lighting solution. The RIGID D-XL PRO boasts more light than ever before in a housing that measures 4" x 4". Recent improvements to the LEDS in the D-XL Series PRO with its new Professional Race Output of up to 170% more raw lumens while maintaining the efficiency that is the hallmark of the entire RIGID product line. Featuring an unbreakable polycarbonate lens, durable UV-resistant polyester powder coat, stainless steel hardware, and a vibration isolator, the D-XL Series PRO is available with your choice of beam pattern optics. Recent updates include new RIGID branding and blacked-out circuit boards for a more refined look. Whether it's off-road, power sports, general automotive, mining, agriculture, or fire and rescue, the D-XL PRO is perfect for any application that requires a high intensity LED light. Features: Family: Dually XL Series | PRO Optic: Specter-Driving LED Color: Cool White Finish Color: Black Mount Type: Surface Shipping Dimensions: 6" × 12" × 6" Product Weight: 3.62lb Sold As: Pair Stainless Steel Hardware Includes: Harness, Bracket, and All necessary mounting hardware UV-resistant Polyester Powder-Coat Unbreakable Polycarbonate Lens Vibration Isolator Specifications: Watts: 89 Amp Draw: 6.36 LED's: 12 Raw Lumens: 9504 Lux @ 10M: 638.4 Beam Distance: 252.7M Peak Beam Intensity: 63841 cd

D-XL PRO Diffused - Pair - Black With the enormous popularity of the original D-Series came the need for a slightly larger, more powerful lighting solution. The D-XL PRO boasts more light than ever before in a housing that measures 4"x4". Recent improvements to the LEDS in the D-XL Series PRO with the Professional Race Output of up to 170% more raw lumens while maintaining the efficiency that is the hallmark of the entire product line. Featuring an unbreakable polycarbonate lens, durable UV-resistant polyester powder coat, stainless steel hardware, and a vibration isolator, the D-XL Series PRO is available with your choice of beam pattern optics. Recent updates include RIGID branding and blacked-out circuit boards for a more refined look. Whether it's off-road, power sports, general automotive, mining, agriculture, or fire and rescue, the D-XL PRO is perfect for any application that requires a high intensity LED light. Features:  Stainless Steel Hardware Includes: Harness, Bracket, and All necessary mounting hardware UV-resistant Polyester Powder-Coat Unbreakable Polycarbonate Lens Vibration Isolator Specifications:  Watts: 67 Amp Draw: 4.79 LED's: 9 Raw Lumens: 7128 Lux @ 10m: 39.8 Beam Distance: 63.1 m Peak Beam Intensity: 3980 cd

D-XL PRO - Diffused LED - Pair - White With the enormous popularity of the original D-Series came the need for a slightly larger, more powerful lighting solution. The RIGID D-XL PRO boasts more light than ever before in a housing that measures 4" x 4". Recent improvements to the LEDS in the D-XL Series PRO with its Professional Race Output of up to 170% more raw lumens while maintaining the efficiency that is the hallmark of the entire RIGID product line. Featuring an unbreakable polycarbonate lens, durable UV-resistant polyester powder coat, stainless steel hardware, and a vibration isolator, the D-XL Series PRO is available with your choice of beam pattern optics. Recent updates include RIGID branding and blacked-out circuit boards for a more refined look. Whether it's off-road, power sports, general automotive, mining, agriculture, or fire, and rescue, the D-XL PRO is perfect for any application that requires a high-intensity LED light. Features: Family: Dually XL Series | PRO Optic: Flood / Downward Diffused LED Color: Cool White Finish Color: White Mount Type: Surface Shipping Dimensions: 6" × 12" × 6" Product Weight: 3.62lb Sold As: Pair Stainless Steel Hardware Includes: Harness, Bracket, and All necessary mounting hardware UV-resistant Polyester Powder-Coat Unbreakable Polycarbonate Lens Vibration Isolator Specifications: Watts: 67 Amp Draw: 4.79 LEDs: 9 Raw Lumens: 7128 Lux @ 10M: 39.8 Beam Distance: 63.1M Peak Beam Intensity: 3980 cd

Groco 500-D Toilet Seat/Cover, White  

Groco P-7004-D Psr Base  

Groco S-84-D Tie Rod Monel .5 X 20.375  

Stealth Series - Fold Down All-Round Light (1642) For use on windshields, T-Tops, Rails, Arches and Hard Tops Plastic Adapter Available for Flat or "V" Type Mounts, Contains Notch for Through-Base Wiring Fold-Down, Adjustable Angle Reduced Glare Design Black Plastic Top with Clear Fluted Lens & Frosted Globe Chrome Plated Zinc Alloy Base Quick Release Lever Graduated Adjustment Increments Designed for use on Pontoon Boat Square Rails Vertical Height: 13-3/8" 12v Pole: 3/4" Diameter Anodized Base Dimensions: 2-1/4" x 5/8"

Major Repair Kit for Sherwood D-05MJK Major Kit This kit contains the following items   MS DATA SHEET 1 DATA SHEET SH 06333 1 BUSHING SH 10515C 1 SCREW & WASHER SH 10615K 1 IMPELLER KIT SH 10927 1 SEAL/SEAT ASSEMBLY SH 10931 1 VELLUMOID 505 FIBRE GASKET SH 10944 1 CAM BRASS LARGE CHRYSLER SH 12710 4 LOCKWASHER SH 1311 2 DOWELL PIN SH 1482 4 SCREW HEX HD 1/4"-20 x 1/2" SH 4257 2 BALL BEARING SH 4258 2 SNAP RING (SMALL) SH 4259 1 SNAP RING (LARGE) SH 4432 1 KEY     This kit is put together at time of order.