Spare Vane Only f/WindTrak 10.Sport

J-Base for WindTrak 10.Sport for Side, Top or Front of Mast Mounting Allows for side, top, or front mounting on most masts, on big boats or dinghies alike. Standard with the WindTrak 10.Sport, J-Base™ can be ordered as an option for WindTrak 15. Standard with the WindTrak 10.Sport, J-Base™ can be ordered as an option for WindTrak 15. Allows for side, top, or front mounting on most masts, on big boats or dinghies alike. J-Base is made of glass filled polycarbonate, 2″ (5 cm) long. Includes stainless steel set screw and (2) #10 self-tapping screws. Reduces overall weight by 15 grams when substituted for standard mounting base on WindTrak 15.

Universal Masthead Mount Extend your WindTrak 10.Sport or WindTrak 15 vane away from masthead obstructions and turbulence. The 13" (33 cm) arm comes with hardware allowing side or top mounting and offset angles up to ±20 degrees. May be attached securely to flat, curved, vertical, horizontal, or inclined surfaces. Gain space aloft and improve mounting position of wind finders and other equipment. Mount on the back of the mast for easier viewing from the cockpit. The mount adapts to virtually every masthead situation. Features: Length 13" (33 cm) Weight 3.2 oz (90 g) Boom can be shortened if necessary; complete instructions included Can be used with WindTrak Light #3200. Also accommodates Davis J-Base Mounts (using #10 stainless steel screws and nuts, not included)

Spare Vane Only f/WindTrak 15

WindTrak 10 Sport Wind Vane With the introduction of the WindTrak 10 Sport, WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia van, and easy-to-read, fully adjustable tacking tab system. Reflector tape on the vane and tacking tabs make WindTrak 10 Sport easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! WindTrak 10 Sport has a 10" (25 cm) vane. Includes glass reinforced polycarbonate J-Base for side, top or front of mast mounting on most dinghies, smaller boats and sport boats. Stands just 9.25" (23.5 cm) tall and weighs 1.2 ounces (31 g).

WindTrak AV Spare Vane Only

J-BASE for WindTrak 15 This optional mount for WindTrak 15 provides more versatility and reduces overall weight aloft by 15 grams when substituted for standard WindTrak 15 mounting base. The J-Base comes with two #10 (5 mm) selftapping screws. Drill a pilot hole in mast, apply silicone sealant or Locktite® and screw into mast. Installation of J-Base can also be accomplished by tapping the mast for 3/16" (5 mm) machine screws or by using epoxy putty to affix base to the mast

Wind Vane Determine wind direction with your GWS™ 10 with this wind vane. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Spare Cap f/1313 Gas Fill Non-Locking Spare Cap f/1313 Gas Fill

Signature Series 3i 10" Sports Subwoofer - White The Signature Series 3i range of premium marine speakers, subwoofers, wake tower speakers, and tweeters delivers crystal-clear audio and withstands marine conditions like never before.   With an enhanced design for the harsh marine environment, the Signature Series 3i range features new marinized connectors and a redesigned grille for easy installation and superior protection.  Incorporating premium materials and superior acoustic engineering, you can enjoy that uncompromisingly pure listening experience on your boat, season after season.  Combining function and style, the Signature Series 3i range is made for life on the water, just like you. Features: Delivers premium sound quality suited for the marine environment  Marinized design with IP65 rating  Designed to optimally work with Fusion stereo systems and amplifiers  True-Marine™ design from Fusion Defined high-fidelity, low-frequency acoustics are a result of the excellent self-damping and bass reproduction  Technical Specifications: Peak Power - 600 Watts RMS Power - 300 Watts Nominal Impedance - 4 ohms Overall Dimensions (Diameter x Depth) - 10.83" x 6.77" (275 x 172 mm) Mounting Depth - 5.24" (106 mm) Sensitivity - 86 dB Weight - 11.2 lbs per speaker (5.06 kg) LED Lighting - No In the Box: One (1) Subwoofer Mounting hardware Two (2) water-resistant cable assemblies with 2-pin connector (5.9" (150mm)) Instruction manual *Sold as an Individual

Signature Series 3i 10" Sports Subwoofer - Grey The Signature Series 3i range of premium marine speakers, subwoofers, wake tower speakers, and tweeters delivers crystal-clear audio and withstands marine conditions like never before.   With an enhanced design for the harsh marine environment, the Signature Series 3i range features new marinized connectors and a redesigned grille for easy installation and superior protection.  Incorporating premium materials and superior acoustic engineering, you can enjoy that uncompromisingly pure listening experience on your boat, season after season.  Combining function and style, the Signature Series 3i range is made for life on the water, just like you. Features: Delivers premium sound quality suited for the marine environment  Marinized design with IP65 rating  Designed to optimally work with Fusion stereo systems and amplifiers  True-Marine™ design from Fusion Defined high-fidelity, low-frequency acoustics are a result of the excellent self-damping and bass reproduction  Technical Specifications: Peak Power - 600 Watts RMS Power - 300 Watts Nominal Impedance - 4 ohms Overall Dimensions (Diameter x Depth) - 10.83" x 6.77" (275 x 172 mm) Mounting Depth - 5.24" (106 mm) Sensitivity - 86 dB Weight - 11.2 lbs per speaker (5.06 kg) LED Lighting - No In the Box: One (1) Subwoofer Mounting hardware Two (2) water-resistant cable assemblies with 2-pin connector (5.9" (150mm)) Instruction manual *Sold as an Individual

 Power Pole Cover f/Pro Series & Sportsman 8' Models Only Power Pole protective travel cover made of 1800 denier polyester PVC coated black fabric. The PVC coated inside assures that the cover will not scratch the finish while protecting the power pole from road debris while trailering. The cover fits securely over the power pole and attaches with a strap at the bottom without having a full length zipper to get gummed up with mud, muck and debris. Travel cover cannot be used when accessories are mounted on power pole. For Pro Series/Sportsman 8' power poles only.

XS-X10SPW 10" Sports Grill Cover - White for XS Series Subwoofer Features: 10"  Sports Grill Cover Color: White Sold as a Single WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

XS-X10SPG 10" Sports Grill Cover - Grey for XS Series Subwoofer Features: 10"  Sports Grill Cover Color: Grey Sold as a Single WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

WindTrak Light (for 3100/3150) Light up the reflector tabs and vane on your WindTrak for easy viewing at night with WindTrak Light. Waterproof and non-corroding silver parts give long-life at just 120 ma current draw. Fits under WindTrak 15, WindTrak 10 or J-Base™ mounting socket.