WindTrak 10 Sport Wind Vane With the introduction of the WindTrak 10 Sport, WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia van, and easy-to-read, fully adjustable tacking tab system. Reflector tape on the vane and tacking tabs make WindTrak 10 Sport easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! WindTrak 10 Sport has a 10" (25 cm) vane. Includes glass reinforced polycarbonate J-Base for side, top or front of mast mounting on most dinghies, smaller boats and sport boats. Stands just 9.25" (23.5 cm) tall and weighs 1.2 ounces (31 g).

Universal Masthead Mount Extend your WindTrak 10.Sport or WindTrak 15 vane away from masthead obstructions and turbulence. The 13" (33 cm) arm comes with hardware allowing side or top mounting and offset angles up to ±20 degrees. May be attached securely to flat, curved, vertical, horizontal, or inclined surfaces. Gain space aloft and improve mounting position of wind finders and other equipment. Mount on the back of the mast for easier viewing from the cockpit. The mount adapts to virtually every masthead situation. Features: Length 13" (33 cm) Weight 3.2 oz (90 g) Boom can be shortened if necessary; complete instructions included Can be used with WindTrak Light #3200. Also accommodates Davis J-Base Mounts (using #10 stainless steel screws and nuts, not included)

J-Base for WindTrak 10.Sport for Side, Top or Front of Mast Mounting Allows for side, top, or front mounting on most masts, on big boats or dinghies alike. Standard with the WindTrak 10.Sport, J-Base™ can be ordered as an option for WindTrak 15. Standard with the WindTrak 10.Sport, J-Base™ can be ordered as an option for WindTrak 15. Allows for side, top, or front mounting on most masts, on big boats or dinghies alike. J-Base is made of glass filled polycarbonate, 2″ (5 cm) long. Includes stainless steel set screw and (2) #10 self-tapping screws. Reduces overall weight by 15 grams when substituted for standard mounting base on WindTrak 15.

Spare Vane Only f/WindTrak 10.Sport

Blacksmith Sport Boat Carbon Fiber Wind Vane Bring your sailing experience to a new level Davis Instruments introduces Blacksmith Wind Vanes, made from super lightweight 3D carbon fiber and duraluminum to withstand the rigors of hard racing. Features: Handmade carbon masthead wind vane for 16-28 ft boats 9×10 in / 23×25 cm 0.7 oz / 20 g 3D carbon & duraluminum J-base for side, top, or front mounting

Blacksmith Olympic Boat Carbon Fiber Wind Vane Bring your sailing experience to a new level Davis Instruments introduces Blacksmith Wind Vanes, made from super lightweight 3D carbon fiber and duraluminum to withstand the rigors of hard racing. Feature precise balance – Olympic Boat Carbon Fiber Wind Vane is effective and efficient in 0.8 knot up to 40 knots wind conditions. Features: Handmade carbon masthead wind vane for boats up to 20 ft 9×9 in / 23×23 cm 0.5 oz / 13.9 g 3D carbon & duraluminum J-base for side, top, or front mounting

Blacksmith Horizontal Carbon Fiber Wind Vane Bring your sailing experience to a new level Davis Instruments introduces Blacksmith Wind Vanes, made from super lightweight 3D carbon fiber and duraluminum to withstand the rigors of hard racing. Horizontal is a dinghy race pro gooseneck wind vane for Laser, Finn, Banshee, Sunfish, Optimist, El Toro and Sabot. Feature precise balance – effective and efficient in 0.8 knot up to 40 knots wind conditions. Features: Handmade dinghy carbon gooseneck wind vane 12×7.8 in / 30×20 cm 0.8 oz / 25 g 3D carbon & duraluminum Adjustable mast clam

WindTrak 15 WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system. WindTrak is the perfect choice for all cruising and racing boats 15' (4.6 meters) and bigger. Reflector tape on the vane and tacking tabs make WindTrak 15 easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! WindTrak 15 has a 15" (38 cm) vane. Includes through-bolt or drill and tap mounting socket; 5/16" -18 stainless stud, washers and nut. Stands 12.75" (32 cm) tall and weighs just 3.6 ounces (101 g). A bird-proof spike extends another 10" (24 cm) above the vane to discourage birds from landing.

WindTrak AV Antenna Mount Wind Vane WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system. WindTrak AV installs onto most whip antennas, including Metz and Shakespeare brands, with a whip diameter less than 1/8" (3 mm). Combine two installations into one to reduce masthead clutter, weight, and windage aloft. Rides on low-friction Teflon® bearings. Complete with 15" (38 cm) vane, reflective tacking arms, hardware and instructions for easy installation. Antenna not included.

Blacksmith Crazy Kids Fiberglass Wind Vane Bring your sailing experience to a new level traditional wind indicators tend to be fragile and easily bent or get broken. Not anymore! Davis Instrument's Optimist Pro Wind Vane, made from black fiber glass and duraluminum to withstand the rigors of hard racing. Crazy Kids Wind Vane is a small boat wind vane for mast head mounting. Handcrafted, calibrated and tested, Crazy Kids is precision-balanced to be incredibly sensitive in breezes from 0.8 to 40 knots. Hi-tech black with yellow highlights, they stand out in both sunny and overcast skies. Comes with an American flag sticker that can be used to identify a US sailor at international competitions. Features: Handmade Optimist wind vane for mast head mounting 7×11 in / 18×28 cm 0.5 oz / 14 g Black fiber glass & duraluminum Carbon-free

i60 SeaTalkng Instruments - Wind w/Wind Vane Transducer The all-new i60 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i60 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i60 Analog Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays. For the ultimate in flexibility the i60 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of i60 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i60 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i60 Instruments are waterproof to IPX6 standards. The i60 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase. i60 Wind Instrument w/Windvane Transducer Full featured wind display for cruising and racing sailboats. The i60 Wind features an easy-to-read analog dial, nighttime red backlighting and high-contrast text and graphics. Short arm vane supplied with 30m (97.5') cable Compatible with Raymarine's masthead transducer (recommend for sailboats) Displays wind speed, direction, Beaufort, max wind speed, VMG, and tack Alarms for high and low apparent wind angle, low true wind speed, and maximum true wind speed. Apparent wind display and True wind when integrated with a compass or autopilot, and speed instrument i60 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. Large, crisp LCD displays with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70 and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy

Wind Vane Kit Spare wind vane assembly with fixings and illustrated fitting instructions for Clipper, Target and Cruiser masthead units with 5 wires. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wind Vane Kit Wireless Tactical for Version 2 - 3 Wire Units Spare wind vane assembly with fixings and illustrated fitting instructions For Clipper, Target, Cruiser and Wireless, Tactical masthead units. Clipper / Target / Cruiser Version 2 – three wire / Wireless / Tactical mast unit.  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wind Vane Assembly for WS300 & WS700 Wind vane assembly spare for WS300 and WS700 series wind sensors.

TA100 Wind Vane, bearing & stud kit