|
Happy Troller - Large Plate
Large Troller: Fits inboard/outboards plus all outboard motors 50 hp and larger.
For the Fisherman who thinks he has everything!
Slows even big motors down to that "ever-so-slow" fish tantalizing speed.
A significant invention in the sport of troll fishing, Happy Troller® mounts on the anti-cavitation plate to allow fine control of trolling speed. At cruising speed, your boat's stability is enhanced.
Locks in "down" position for trolling.
Locks in "up" position for cruising.
Happy Troller is the answer to correct trolling speed. Use it year-round in all boating activities; salt and fresh water.
Key Features:
Reduces troll speed in "down" position
Acts as a stabilizer in "up" position
Maintains stability in bow-light boats
Smooths out ride in rough water
Reduces porpoising and cavitation
Made of only highest quality stainless steel and marine aluminum; clear anodized aluminum finish
Installs in 15 minutes
Stainless steel mounting hardware and installation & operating instructions provided with each unit
|
142.50 |
|
|
Happy Troller - Small Plate
Small Troller: Fits outboard motors from 20 - 50hp
For the Fisherman who thinks he has everything!
Slows even big motors down to that "ever-so-slow" fish tantalizing speed.
A significant invention in the sport of troll fishing, Happy Troller® mounts on the anti-cavitation plate to allow fine control of trolling speed. At cruising speed, your boat's stability is enhanced.
Locks in "down" position for trolling.
Locks in "up" position for cruising.
Happy Troller is the answer to correct trolling speed. Use it year-round in all boating activities; salt and fresh water.
Key Features:
Reduces troll speed in "down" position
Acts as a stabilizer in "up" position
Maintains stability in bow-light boats
Smooths out ride in rough water
Reduces porpoising and cavitation
Made of only highest quality stainless steel and marine aluminum; clear anodized aluminum finish
Installs in 15 minutes
Stainless steel mounting hardware and installation & operating instructions provided with each unit
|
127.50 |
|
|
lil' Fella Trolling Plate
Little brother to the Happy Troller®
Fits all outboard motors up to and including 25hp
Locks "down" for trolling, "up" for cruising
Made of highest quality polycarbonates with stainless steel hardware
|
75.00 |
|
|
Small Offset Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets Small Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
274.50 |
|
|
Large Offset Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
337.50 |
|
|
14" Straight Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets 14" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
157.50 |
|
|
16" Straight Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets 16" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
172.50 |
|
|
18" Straight Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets 18" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
175.50 |
|
|
20" Straight Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets 20" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
180.00 |
|
|
Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow.
Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available.
All-new sleek, modern design.
First all modular system - extremely versatile.
Easy to select and install for any radar, dome, light or camera combination.
Easy to add accessories.
Upgradable for future additions and modifications.
Powder coated aluminum construction
Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer.
The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."
See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )
Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.
SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686
|
|
|
IN STOCK! Garmin Force™ Freshwater Trolling Motors & Accessories
Garmin's Force™ Freshwater Trolling Motors and accessories are now in stock. Garmin brings aboard the most powerful and most efficient trolling motor available. Check it out today!
Move your fishing to a higher level with force. The Force trolling motor is the most powerful and most efficient trolling motor available. Wireless chartplotter connectivity provides navigation, autopilot and anchor lock features. Use the precise anchor lock to hold your boat in the same location while you fish. Force includes a convenient wireless foot pedal that provides instant control and responsiveness yet feels and steers like a cable-steered pedal. See more fish and structure clearly with integrated Ultra High-Definition scanning sonar. It also includes a handheld remote control with a built-in sunlight-readable display. The remote gives you complete control of the trolling motor and simple point-and-go gesture steering.
Specials Closeouts Remanufactured Rebates
|
|
|
Atlas Micro Jacker Small Outboard Hydraulic Jack - 4"
SMALLEST & LIGHTEST HYDRAULIC JACK ON THE MARKET
For Small Outboards - Max Weight 425 lbs / Max Horsepower 115 HP
Great For Shallow Water Boats – Gheenoes River Runners – Jon Boats - Skiffs
Get Out of Trouble Fast – Lifts in 8 Seconds Lightweight – Only 23 Pounds Fish “Skinny Water” With Confidence Self Contained Hydraulics Maximum outboard dry weight: 425 pounds Maximum outboard horsepower: 115 HP* Only Four (4) Inch Setback Clamp-On Motor Adapter Available (optional) Small Footprint – Only 14-5/8” Wide and 11-1/2” High
Clamp-On Motor Adapter (part # AHJM-CMA-DP) allows you to mount smaller engines with clamp-on brackets to the ATLAS Micro Jacker, since they do not mount with bolts on the standard BIA engine hole pattern.
Adjustment Specifications:
With the Micro Jacker in place, you will have about 8.5” to work with in height. This includes 1.5” of adjustment at the transom, another 1.0” on the motor side, 1.0" of adjustment with the motor, and 5" of hydraulic lift with the Micro Jacker itself.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1081.27 |
|
|
GT8HW-TM Plastic, TM or Trolling Motor Transducer, High Wide CHIRP - 150-240kHz, 250W, 8-Pin
GT8HW-TM transducer is perfect for shallow water fishermen who want clear bottom definition under the boat as well as crisp, clear and wide fish arches with excellent target separation. The wider beam width - up to 24 degree beam angle - provides a larger coverage area in the water.
The 8-pin transducer features high wide band CHIRP traditional sonar (150-240 kHz) and has a power rating of 250 W. It can be mounted on the transom or a trolling motor. Follow the included installation instructions carefully to avoid damaging your boat.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
143.99 |
|
|
Motor Stik OutBoard Motor Support Stick - Pair
Features:
Fits Over Trim Rams
Supports Your Outboard While Trailering
Takes the Pressure Off of Hydraulic System
Most Outboards 150hp and Up
Strong Aluminum Tubing with Molded Ends
Safe for Salt or Fresh Water
Note: Some Yamaha motors have a grease fitting on the port side ram. Use a single Motor Stik™ on the starboard side only in this application.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
39.60 |
|
|
Major Repair kit for Sherwood D-55
This kit contains the following items
MS DATA SHEET
1
DATA SHEET
SH 06333
1
BUSHING
SH 10515C
2
SCREW & WASHER
SH 10609
1
GASKET
SH 10612
1
GASKET
SH 10615K
1
IMPELLER KIT
SH 10625
1
SPACER PLATE
SH 10927
1
SEAL/SEAT ASSEMBLY
SH 10944
1
CAM BRASS LARGE CHRYSLER
SH 11515
1
KEY
SH 15883
1
CAM BRASS
SH 343
6
LOCKWASHER
SH 413
2
PINS
SH 4257
1
BALL BEARING
SH 4258
3
SNAP RING (SMALL)
SH 4259
1
SNAP RING (LARGE)
SH 4432
2
KEY
SH 5771
6
SCREW
SH 9959K
1
IMPELLER KIT
This kit is put together at time of order.
|
506.73 |
|