|
Superior feel and function for most outboards, stern drives & inboards. Neutral interlock, neutral throttle warm-up, start-in-gear protection and drag adjustment. Neutral warm-up button for throttle only operation. Neutral interlock prevents accidental engaging in gear. Throttle and shift control on one handle with dual action lever. Can be used in dual station boats with the DS unit. Suitable for most single engine boats. Designed for use with both 3300/33C or OEM type control cables without adaptation. Mechanical advantage 2.38:1.
|
559.99 |
|
|
Control Engine Trim/Tilt, Jackplate or Horn with Pro-Trim Single, or any two functions with Pro-Trim Dual. Fits Safe-T mechanical steering, Rack & Pinion Steering, NFG No Feedback steering(all helms), SeaStar and SeaStar PRO hydraulic steering, Command 200 Rack & Pinion, Baystar, Sport, Sport Plus or Classic Tilt mechanism. "Momentary-On" switch is off in its center "at-rest" position. Switch actuates in up and down directions. U.V. stabilized ABS switch cover blends with dash. Strainless steel bracket fits most steering & adjusts for regular or deep dish wheels. Heavy duty marine wiring harness, color coded to match existing trim & jackplate wiring. Mylar decals for labeling of switch functions. Mounting hardware, instructions included. Display packed.
|
82.75 |
|
|
Control Engine Trim/Tilt, Jackplate or Horn with Pro-Trim Single, or any two functions with Pro-Trim Dual. Fits Safe-T mechanical steering, Rack & Pinion Steering, NFG No Feedback steering(all helms), SeaStar and SeaStar PRO hydraulic steering, Command 200 Rack & Pinion, Baystar, Sport, Sport Plus or Classic Tilt mechanism. "Momentary-On" switch is off in its center "at-rest" position. Switch actuates in up and down directions. U.V. stabilized ABS switch cover blends with dash. Strainless steel bracket fits most steering & adjusts for regular or deep dish wheels. Heavy duty marine wiring harness, color coded to match existing trim & jackplate wiring. Mylar decals for labeling of switch functions. Mounting hardware, instructions included. Display packed.
|
148.03 |
|
|
Control Engine Trim with Pro-Trim Single, or any two functions with Pro-Trim Dual. Fits Safe-T mechanical steering, Rack & Pinion Steering, NFB No Feedback steering (all helms), SeaStar and SeaStar PRO hydraulic steering, Command 200 Rack & Pinion, Baystar, Sport, Sport Plus or Classic Tilt mechanism. “Momentary-On” switch is off in its center “at-rest” position. Switch actuates in up and down directions. U.V. stabilized ABS switch cover blends with dash. Stainless steel bracket fits most steering & adjusts for regular or deep dish wheels. Heavy duty marine wiring harness, color coded to match existing trim & jackplate wiring. Mylar decals for labeling of switch functions. Mounting hardware, instructions included. Display packed.
|
109.99 |
|
|
Control Engine Trim with Pro-Trim Single, or any two functions with Pro-Trim Dual. Fits Safe-T mechanical steering, Rack & Pinion Steering, NFB No Feedback steering (all helms), SeaStar and SeaStar PRO hydraulic steering, Command 200 Rack & Pinion, Baystar, Sport, Sport Plus or Classic Tilt mechanism. “Momentary-On” switch is off in its center “at-rest” position. Switch actuates in up and down directions. U.V. stabilized ABS switch cover blends with dash. Stainless steel bracket fits most steering & adjusts for regular or deep dish wheels. Heavy duty marine wiring harness, color coded to match existing trim & jackplate wiring. Mylar decals for labeling of switch functions. Mounting hardware, instructions included. Display packed.
|
186.99 |
|
|
Original Equipment Quality Replacement Tilt Trim Motor - 2 Wire & 3-Bolt Mount
Replacement outboard tilt trim motor that will fit Yamaha 2001-2004 50 HP 4 Stroke, 2002-2004 60 HP 4 Stroke, 2001-2006 40 HP 2 Stroke (TLR), 2003-2009 50 HP 2 Stroke (TLR).
ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.
Features:
Tilt trim motors are dynamically tested to ensure out-of-the-box performance
Motor shafts induction case hardened at bearing surfaces for superior wear resistance
Epoxy Powder coated for maximum insulation protection
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
YAMAHA Tilt Trim Motor CS3-43880-00
YAMAHA Tilt Trim Motor 62Y-43880-01
YAMAHA Tilt Trim Motor 62Y-43880-02
YAMAHA Tilt Trim Motor 69W-43880-00
YAMAHA Tilt Trim Motor 69W-43880-01
SIERRA Tilt Trim Motor 18-6811
SIERRA Tilt Trim Motor 18-18409
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
245.99 |
|
|
Atlas Blinker Trim System - Dual Switch
Trim Control for Hydraulic Helms.
Features:
Operates Engine Trim and/or Jack Plates
Fits Hydraulic, Cable, and Tilt Steering
Dual Switch
Easy Installation
|
124.60 |
|
|
Atlas Blinker Trim System - Single Switch
Trim Control for Hydraulic Helms.
Features:
Operates Engine Trim and/or Jack Plates
Fits Hydraulic, Cable, and Tilt Steering
Single Switch
Easy Installation
|
71.88 |
|
|
Original Equipment Quality Replacement Tilt Trim Motor - 2 Wire & 4-Bolt Mount
Replacement outboard tilt trim motor that will fit Evinrude ETEC 2005-2009 70-90 HP, 2007-2009 115 HP, 2009- 130 HP. Includes TAK247 mounting kit.
ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.
Features:
Tilt trim motors are dynamically tested to ensure out-of-the-box performance
Motor shafts induction case hardened at bearing surfaces for superior wear resistance
Epoxy Powder coated for maximum insulation protection
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
BRP-OMC 5005817
BRP-OMC 5005838
BRP-OMC 5006319
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
147.31 |
|
|
Swivel Base Rod Holders
RH570
Stainless Steel Side Mount w/ Swivel Base
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a inch stainless steel lock nut at the bottom of the rod holder.
|
210.00 |
|
|
Swivel Base Rod Holders
RH570XL
Stainless Steel Side Mount w/ Swivel Base Extra Long
This holder is 4" longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface.
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
|
230.77 |
|
|
Portable Side Mount with Dual Lock 4 Rod Holder
The great side-mount Rod Holder in a portable version. Easy to install using a 3M Dual-lock technology. Simply clean and place the mounting squares where you want and you're done. The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion. Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods. Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations. Holds up to 4 Rods.
|
42.53 |
|
|
Portable Side Mount with Dual Lock 6 Rod Holder
The great side-mount Rod Holder in a portable version. Easy to install using a 3M Dual-lock technology. Simply clean and place the mounting squares where you want and you're done. The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion. Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods. Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations. Holds up to 6 Rods.
|
48.46 |
|
|
Portable Side Mount with Dual Lock 8 Rod Holder
The great side-mount Rod Holder in a portable version. Easy to install using a 3M Dual-lock technology. Simply clean and place the mounting squares where you want and you're done. The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion. Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods. Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations. Holds up to 8 Rods.
|
62.03 |
|
|
Features standard neutral safety switch, neutral lock out, neutral warm up and safety stop switch with lanyard along with start-in-gear protection. Ergonomically balanced handle design for smooth, positive feel. "Easy-On" cable design accepts virtually every type of OEM and 3300/33C type cable. Can also use Mercury® style cables from 1965 to date, including Gen II, OMC/Johnson/Evinrude/BRP® control cables from 1979 to date. Easily adapted to push or pull cable actuation mode. For best performance use Xtreme Control Cables. Dual action lever (throttle and shift control on one handle). Drag adjustment on all controls. Neutral "warm up" button for throttle-only operation.
|
628.99 |
|