|
Single Lever Side Mount Control - Black/Chrome
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless the engine is idling
Can be installed horizontally or vertically, on the starboard or port side of the boat
Provided with a brake tension release system adjustable from outside
Pull-out handle disengages shift for warm-up Neutral safety switch X12 - 34543 Q (optional) prevents in-gear starting
Exceeds EN ISO 11547 standards when X12 safety switch is installed
|
444.28 |
|
|
Single Lever Top Mount Control w/Neutral Lock & Trim Switch - Black
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
515.33 |
|
|
Single Lever Top Mount Control w/Neutral Lock & Trim Switch - Chrome
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
515.33 |
|
|
Single Lever Top Mount Control w/Neutral Lock - No Trim Switch - Black
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
449.68 |
|
|
Single Lever Top Mount Control w/Neutral Lock - No Trim Switch - Chrome
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
442.22 |
|
|
Twin Lever Top Mount Control w/Neutral Lock & Trim Switch - Chrome
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
903.79 |
|
|
Twin Lever Top Mount Control w/Neutral Lock - No Trim Switch - Chrome
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
715.24 |
|
|
Twin Lever Top Mount Control w/Neutral Lock & Trim Switch - Black
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
899.04 |
|
|
Twin Lever Top Mount Control w/Neutral Lock - No Trim Switch - Black
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
771.35 |
|
|
Features standard neutral safety switch, neutral lock out, neutral warm up and safety stop switch with lanyard along with start-in-gear protection. Ergonomically balanced handle design for smooth, positive feel. "Easy-On" cable design accepts virtually every type of OEM and 3300/33C type cable. Can also use Mercury® style cables from 1965 to date, including Gen II, OMC/Johnson/Evinrude/BRP® control cables from 1979 to date. Easily adapted to push or pull cable actuation mode. For best performance use Xtreme Control Cables. Dual action lever (throttle and shift control on one handle). Drag adjustment on all controls. Neutral "warm up" button for throttle-only operation.
|
479.99 |
|
|
Features standard neutral safety switch, neutral lock out, neutral warm up and safety stop switch with lanyard along with start-in-gear protection. Ergonomically balanced handle design for smooth, positive feel. "Easy-On" cable design accepts virtually every type of OEM and 3300/33C type cable. Can also use Mercury® style cables from 1965 to date, including Gen II, OMC/Johnson/Evinrude/BRP® control cables from 1979 to date. Easily adapted to push or pull cable actuation mode. For best performance use Xtreme Control Cables. Dual action lever (throttle and shift control on one handle). Drag adjustment on all controls. Neutral "warm up" button for throttle-only operation.
|
628.99 |
|
|
D-SS Driving, Spot & Flood LED Lights
One of Rigid's most versatile, compact lighting solutions just got better with the D-SS, Dually Side Shooter LED cube. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications.
The D-SS cube incorporates the same powerful optics and legendary LED technology as Rigid's popular D-Series lights but with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with Rigid's advanced Flood, Spot, or Driving optics, so there's a D-SS lighting solution for nearly any application.
The D-SS LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only Rigid provides a broad, powerful lighting solution in such a compact package.
Ignite Surface Mount Diffused, Flood & Spot LED Lights
The Rigid Ignite™ is the smallest, most versatile light in Rigid Industries' product line! Measuring approximately 1.4” x 1.4” x 2”, this flexible light packs 1000 raw lumens using Spot, Flood or Diffused beam patterns; perfect for any application where short range light output is needed.
The Ignite also utilizes a Go-Pro® style mounting bracket which mates with an array of off the shelf Go-Pro mounts. Due to the wide range of mounting options, the Ignite's applications are almost limitless. The compact and lightweight housing makes the Ignite a great choice for auxiliary lighting on cars and trucks, motorcycles, UTVs, and even marine applications. Low current draw (less than 1 amp) and voltage requirements (6-28 volts) makes the Ignite adaptable to any application.
*Single light kits include one Ignite, mounting brackets, and related hardware. GoPro Mount Not Included.
Specials Closeouts Remanufactured Rebates
|
|
|
Power A Mark II™
Electronic Control System - Single Engine w/out Trim
The easy to install Power A Mark II™ control system provides fingertip operation of throttle and shift levers.
Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to work on mechanically controlled as well as electronic and electro-hydraulic gas and diesel inboards, sterndrives and outboards.
The Power A Mark II™ comes with many features including Dock Assist, which offers the operator the opportunity to reduce the sensitivity of the throttle function for easier dockside handling.
Other standard features include RPM Synchronization, which reduces engine vibration and improves fuel economy, a High Idle feature to increase RPM where higher idle is necessary for cold engine operations, a programmable Trolling Valve Control and neutral Warm Up.
The stylish and ergonmically designed control makes the Power A Mark II™ suitable for many types of applications ranging from sport boats, yachts and commercial applications.
Available with and without trim, the control has audible and visual interfaces which alert the operator to the current status of the control system.
With the ability to control up to 2 engines from up to 4 different stations, the Power A Mark II™ is a modular and flexible system with simple to install components.
The unique Control Unit Display of the Power A Mark II™ provides simple touch pad programming with descriptive information regarding the set up, tuning and diagnostics of the system.
The Power A Mark II™ is a system that can replace mechanical controls either on fully mechanical engines, or on fully electronical engins, or on engines with the combination of both characteristics.
Technical Features:
Single Lever/Dual Function and Dual Lever/Dual Function for shift, throttle and trolling
Up to 4 control stations
Power supply: min 9 max 32V
Working temperature: -25°C to +75°C
Control station functions:
- Station Select
- Engines Warm up
- High idle
- Docking
- Engine synchronization
- Trolling valve
Electronic throttle outputs:
- Voltage (double output 0 - 5V and 0 - 2,5V)
- PWM (0-100%, frequency from 200Hz to 1kHz)
- Current (4 - 10mA)
Digital Throttle Output:
- SAE J 1939
- NMEA 2000
Trolling valve output
- Voltage (0 - 5V)
- PWM (0-100%, frequency from 100Hz to 1 kHz)
- Current (4 - 20mA)
Electric shift control:
- 2 or 3 ON/OFF or proportional solenoids
- Shift delays fully settable
Safety Devices:
Start in-gear PROTECTION(start inhibition with shifted gear)
Audible and visual diagnostic failure alarm (READABLE MESSAGES ON THE CONTROL UNIT DISPLAY)
Proportional shift delays
Programmable working parameters
Meets CEI EN 60945 standards
EMC Certification and CE MARK
Conforms with:
CEI EN60945
UNI-EN ISO 11547
COMPATIBILITY WITH ALL MECHANICAL THROTTLE ENGINES
COMPATIBILITY WITH ALL ELECTRONIC THROTTLE ENGINES
Cummins, Detroit Diesel, Scania, Iveco, FPT, Lombardini, VM Motori, FNM, Yanmar, CMD-Volkswagen, Hyundai ecc.
The Power A Mark II™ electronic system actuators cannot be installed in those rooms where ignition-proof devices are required.
|
1229.74 |
|
|
Power A Mark II™
Electronic Control System - Single Engine w/Trim
The easy to install Power A Mark II™ control system provides fingertip operation of throttle and shift levers.
Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to work on mechanically controlled as well as electronic and electro-hydraulic gas and diesel inboards, sterndrives and outboards.
The Power A Mark II™ comes with many features including Dock Assist, which offers the operator the opportunity to reduce the sensitivity of the throttle function for easier dockside handling.
Other standard features include RPM Synchronization, which reduces engine vibration and improves fuel economy, a High Idle feature to increase RPM where higher idle is necessary for cold engine operations, a programmable Trolling Valve Control and neutral Warm Up.
The stylish and ergonmically designed control makes the Power A Mark II™ suitable for many types of applications ranging from sport boats, yachts and commercial applications.
Available with and without trim, the control has audible and visual interfaces which alert the operator to the current status of the control system.
With the ability to control up to 2 engines from up to 4 different stations, the Power A Mark II™ is a modular and flexible system with simple to install components.
The unique Control Unit Display of the Power A Mark II™ provides simple touch pad programming with descriptive information regarding the set up, tuning and diagnostics of the system.
The Power A Mark II™ is a system that can replace mechanical controls either on fully mechanical engines, or on fully electronical engins, or on engines with the combination of both characteristics.
Technical Features:
Single Lever/Dual Function and Dual Lever/Dual Function for shift, throttle and trolling
Up to 4 control stations
Power supply: min 9 max 32V
Working temperature: -25°C to +75°C
Control station functions:
- Station Select
- Engines Warm up
- High idle
- Docking
- Engine synchronization
- Trolling valve
Electronic throttle outputs:
- Voltage (double output 0 - 5V and 0 - 2,5V)
- PWM (0-100%, frequency from 200Hz to 1kHz)
- Current (4 - 10mA)
Digital Throttle Output:
- SAE J 1939
- NMEA 2000
Trolling valve output
- Voltage (0 - 5V)
- PWM (0-100%, frequency from 100Hz to 1 kHz)
- Current (4 - 20mA)
Electric shift control:
- 2 or 3 ON/OFF or proportional solenoids
- Shift delays fully settable
Safety Devices:
Start in-gear PROTECTION(start inhibition with shifted gear)
Audible and visual diagnostic failure alarm (READABLE MESSAGES ON THE CONTROL UNIT DISPLAY)
Proportional shift delays
Programmable working parameters
Meets CEI EN 60945 standards
EMC Certification and CE MARK
Conforms with:
=
CEI EN60945
UNI-EN ISO 11547
COMPATIBILITY WITH ALL MECHANICAL THROTTLE ENGINES
COMPATIBILITY WITH ALL ELECTRONIC THROTTLE ENGINES
Cummins, Detroit Diesel, Scania, Iveco, FPT, Lombardini, VM Motori, FNM, Yanmar, CMD-Volkswagen, Hyundai ecc.
The Power A Mark II™ electronic system actuators cannot be installed in those rooms where ignition-proof devices are required.
|
1286.06 |
|
|
Power A Mark II™
Electronic Control System - Twin Engines w/out Trim
The easy to install Power A Mark II™ control system provides fingertip operation of throttle and shift levers.
Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to work on mechanically controlled as well as electronic and electro-hydraulic gas and diesel inboards, sterndrives and outboards.
The Power A Mark II™ comes with many features including Dock Assist, which offers the operator the opportunity to reduce the sensitivity of the throttle function for easier dockside handling.
Other standard features include RPM Synchronization, which reduces engine vibration and improves fuel economy, a High Idle feature to increase RPM where higher idle is necessary for cold engine operations, a programmable Trolling Valve Control and neutral Warm Up.
The stylish and ergonmically designed control makes the Power A Mark II™ suitable for many types of applications ranging from sport boats, yachts and commercial applications.
Available with and without trim, the control has audible and visual interfaces which alert the operator to the current status of the control system.
With the ability to control up to 2 engines from up to 4 different stations, the Power A Mark II™ is a modular and flexible system with simple to install components.
The unique Control Unit Display of the Power A Mark II™ provides simple touch pad programming with descriptive information regarding the set up, tuning and diagnostics of the system.
The Power A Mark II™ is a system that can replace mechanical controls either on fully mechanical engines, or on fully electronical engines, or on engines with the combination of both characteristics.
Technical Features:
Single Lever/Dual Function and Dual Lever/Dual Function for shift, throttle and trolling
Up to 4 control stations
Power supply: min 9 max 32V
Working temperature: -25°C to +75°C
Control station functions:
- Station Select
- Engines Warm up
- High idle
- Docking
- Engine synchronization
- Trolling valve
Electronic throttle outputs:
- Voltage (double output 0 - 5V and 0 - 2,5V)
- PWM (0-100%, frequency from 200Hz to 1kHz)
- Current (4 - 10mA)
Digital Throttle Output:
- SAE J 1939
- NMEA 2000
Trolling valve output
- Voltage (0 - 5V)
- PWM (0-100%, frequency from 100Hz to 1 kHz)
- Current (4 - 20mA)
Electric shift control:
- 2 or 3 ON/OFF or proportional solenoids
- Shift delays fully settable
Safety Devices:
Start in-gear PROTECTION(start inhibition with shifted gear)
Audible and visual diagnostic failure alarm (READABLE MESSAGES ON THE CONTROL UNIT DISPLAY)
Proportional shift delays
Programmable working parameters
Meets CEI EN 60945 standards
EMC Certification and CE MARK
Conforms with:
CEI EN60945
UNI-EN ISO 11547
COMPATIBILITY WITH ALL MECHANICAL THROTTLE ENGINES
COMPATIBILITY WITH ALL ELECTRONIC THROTTLE ENGINES
Cummins, Detroit Diesel, Scania, Iveco, FPT, Lombardini, VM Motori, FNM, Yanmar, CMD-Volkswagen, Hyundai ecc.
The Power A Mark II™ electronic system actuators cannot be installed in those rooms where ignition-proof devices are required.
|
1524.31 |
|