SilverSteer™ Front Mount Outboard Hydraulic Steering System w/ UC130-SVS-1 Cylinder Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flats boat or tournament-style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive, and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders. UC130-SVS-1 Cylinder is ideal for applications with limited space or potential pinch-points between the cylinder and transom (i.e., when tilting the motor all the way up or motors mounted on a jack plate).  The end-mounted fittings keep the hydraulic hoses free and clear. SilverSteer™ Package Kit Contains: UC130-SVS-1 Cylinder (fittings face out from the ends of the cylinder)

SilverSteer™ 2.0 High-Performance Front Mount Outboard Hydraulic Steering System - 1500PSI FM V2 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders. Features: Horsepower: Single engine, 350hp, dual engine, 600hp Helm: 7.3 cu in/120cc Hose: 1,500psi Turns Lock-to-Lock: 4.3 Included Equipment: UP25 F-SVS front mount helm pump, UC128/2-SVS front mount outboard cylinder, hydraulic oil (two qts.), Hose kits sold separately Steering Wheel: Sold separately Steering Wheel Shaft: 3/4" tapered Warranty: Two years

Steer Stop Outboard Hydraulic Steering Lock Set - 4" T-H Marine developed the first steering stop available for outboard motors and now we've revised that design so it stands apart from imitation and performs better than any other on the market.  With our 4" Steer Stop Outboard Hydraulic Steering Lock in place, boaters can center their outboard motor equipped with hydraulic steering and keep it from wandering when trailering. Similar to the original Steer Stop, units clip onto hydraulic steering rams on either side of outboard to keep engine straight and prevent damage to motor supports. The cord then keeps units together when stowed and aids removal. Additionally, with the new grip built into the design, it is easier than ever to install and remove the Steer Stop Outboard Hydraulic Steering Lock, saving you effort and wear and tear on your hands. Features: Must-know information about the 4" Steer Stop Outboard Hydraulic Steering Lock: Locks hydraulic steering when trailering Fits most steering cylinder rods on outboard engines Snaps over outboards hydraulic steering cylinder rods Helps keep engine centered during transport Protects steering system, outboard, and motor supports Includes cord to connect units for storage and to aid in removal Grip makes it even simpler and easier to put on and take off WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SilverSteer™ Universal Front Mount Outboard Hydraulic Tilt Steering System - 1500PSI V1 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders. SilverSteer™ Package Kit Contains: UC130/1-SVS Cylinder UP25F-SVS Helm 2 Quarts of Hydraulic Oil

SilverSteer™ Universal Front Mount Outboard Hydraulic Steering System w/ UC128-SVS-1 Cylinder Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders. SilverSteer™ Package Kit Contains: UC128-SVS-1 Cylinder (fittings are on the face of the cylinder, between the cylinder and boat's transom)

SilverSteer™ Outboard Hydraulic Tilt Steering System - UC130 V2 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.

SilverSteer™ Universal Front Mount Outboard Hydraulic Tilt Steering System - 1500PSI V2 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders. SilverSteer™ Package Kit Contains: UC130/2-SVS cylinder

Baystar Hydraulic Steering System for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables, and outboard engines with ABYC standard engine tilt tubes. For single station, single engine use only. BayStar is not intended for high speed, high performance type boats, such as bass boats. Low friction hydraulic steering system, 5 turns lock-to-lock. Balanced cylinder with compact design that fits most splashwells and provides full engine movement. Compact helm with small footprint, requires only 3" dash hole (standard or tilt).Packaged complete with helm, cylinder, fittings, tubing, oil, fill kit and detailed instructions. Standard 3/4" tapered steering shaft. Meets ABYC standards and NMMA certification requirements. Baystar Steering System is not for use on pontoon boats.

SilverSteer™ Front Mount Outboard Hydraulic Steering System - UC130 V2 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over tightening or leaking fittings from loosening during installation, a common problem on competing cylinders. Specifications: Volume: 130 cc - 7.93 cu.in Output force: 492 kg - 1085 lbs Inside diameter: 36 nm - 1.43" Stroke: 185 nm - 7.28" 3/8" fittings: For high pressure flex hose Bleed fittings: DN5 quick connect Kit Includes: UC130-SVS 2 UP25F-SVS 2x Oil 15

SilverSteer™ Outboard Hydraulic Tilt Steering System - UC130 V1 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.

GoTech™ 1.0 Universal Front Mount Outboard Hydraulic Steering System For outboard single engine up to 115hp. Kit Contains: UP18 - Intermediate helm pump UC81-OBF - Front mount outboard cylinder OL 150 - Hydraulic oil - 2 litres KIT OB-GT-60 - Hose kit dia, 1/4" 6M(19.7") length

Autopilot Hydraulic Steering Installation Kit w/Hoses & Fittings Hydraulic Hose & Fittings Kit Includes: (2) - 30" Flexible High Pressure Hyd. Hose's (1) - 30" Flexible Low Pressure Hyd. Hose O.R.B Helm fitting kit NPT Helm fitting kit

Atlas Micro Jacker Small Outboard Hydraulic Jack - 4" SMALLEST & LIGHTEST HYDRAULIC JACK ON THE MARKET For Small Outboards - Max Weight 425 lbs / Max Horsepower 115 HP Great For Shallow Water Boats – Gheenoes     River Runners – Jon Boats - Skiffs Get Out of Trouble Fast – Lifts in 8 Seconds Lightweight – Only 23 Pounds Fish “Skinny Water” With Confidence Self Contained Hydraulics Maximum outboard dry weight: 425 pounds Maximum outboard horsepower: 115 HP* Only Four (4) Inch Setback Clamp-On Motor Adapter Available (optional) Small Footprint – Only 14-5/8” Wide and 11-1/2” High Clamp-On Motor Adapter (part # AHJM-CMA-DP) allows you to mount smaller engines with clamp-on brackets to the ATLAS Micro Jacker, since they do not mount with bolts on the standard BIA engine hole pattern. Adjustment Specifications: With the Micro Jacker in place, you will have about 8.5” to work with in height. This includes 1.5” of adjustment at the transom, another 1.0” on the motor side, 1.0" of adjustment with the motor, and 5" of hydraulic lift with the Micro Jacker itself. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fourtech 16' Mach Rotary Steering System w/Helm, Bezel & Cable Featuring the T91 high performance helm with a Planetary Gear Design, the Fourtech offers performace, flexibility and durability increased by top quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop in" replacement for competing system; requiring no new holes for installation. The package includes: T91 helm (PLANETARY GEAR DESIGN) X34 90° Bezel Highly Flexible M90 Mach cable

Fourtech 6' Mach Rotary Steering System w/Helm, Bezel & Cable Featuring the T91 high performance helm with a Planetary Gear Design, the Fourtech offers performace, flexibility and durability increased by top quality materials and construction. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct "drop in" replacement for competing system; requiring no new holes for installation. The package includes: T91 helm (PLANETARY GEAR DESIGN) X34 90° Bezel Highly Flexible M90 Mach cable