Pro Rack features patented NFB technology and twin cables to handle the steering loads in single non-power assisted outboards with top speeds above 50 MPH. Back mount design for easy installation. Fits the standard SeaStar Rack & Pinion cutout, so no dash modifications required when upgrading an existing rack system. Fits boats to 24'. Standard 3/4" tapered steering shaft. Stainless steel telescopic ram. Wheel not included.

Pro Rack features patented NFB technology and twin cables to handle the steering loads in single non-power assisted outboards with top speeds above 50 MPH. Back mount design for easy installation. Fits the standard SeaStar Rack & Pinion cutout, so no dash modifications required when upgrading an existing rack system. Fits boats to 24'. Standard 3/4" tapered steering shaft. Stainless steel telescopic ram. Wheel not included.

Pro Rack features patented NFB technology and twin cables to handle the steering loads in single non-power assisted outboards with top speeds above 50 MPH. Back mount design for easy installation. Fits the standard SeaStar Rack & Pinion cutout, so no dash modifications required when upgrading an existing rack system. Fits boats to 24'. Standard 3/4" tapered steering shaft. Stainless steel telescopic ram. Wheel not included.

NFB helms are for single or dual NFB Rack systems. NFB tilt helm had 48° of adjustment in 5 - 12° increments.

Evo Pro 316 Cast Stainless Steel Steering Wheel with Control Knob - 13.5" Diameter  Boat owners shouldn't have to sacrifice comfort for elegant styling in a steering wheel. With a gleaming stainless steel center spoke, ergonomic polyurethane grip, and control knob, Schmitt Marine's Model 724 Evo Pro wheel provides the best of both worlds. Combining solid value with a luxurious appearance, the Evo Pro offers features owners expect in more expensive wheels. Cast 316 stainless steel construction ensures strength and durability. Molded to simulate fine hand-stitched leather, the poly grip contributes a plush look as well as optimal ease and handling. Its contrasting combination of materials gives the Evo Pro a smart, sporty look, with a black hand grip, center cap, and control knob setting off the high polish of the stainless steel. The control knob itself eliminates the need for hand-over-hand steering, allowing greater precision and control. Easy to mount, the Evo Pro has a 3/4" tapered shaft and has 13-1/2" wheel diameter. Schmitt Marine thoroughly tests each of its stainless steel wheels and offers a lifetime warranty.

For use with Adjustable Tie Bars on standard Dometic steering cylinders. Allows the consumer to take full advantage of all the features and benefits of the heavy-duty adjustable tie bar products for twin engine applications up to 600 HP. Utilizes Tournament series adjustable tie bars. High strength, forged aluminum. Eliminates need for cut-to-length traditional tie bars.

Dual Flush Pro with Gate Valve Clean your entire septic system with this reverse flush valve. Forces water backs up into plumbing lines to break up clogs in pipes. Allows you to backfill and flush black and grey water tanks, then reverse valve and flush sewer drain hose. Anti-siphon valve and complete valve assembly included. Patented. Features: A convenient way to clean the entire septic system Forces water back up into plumbing lines to break up clogs in pipes Allows to backfill and flush black and grey water tanks Anti-siphon valve and complete valve assembly included Clear, break-resistant polycarbonate adapters make it easy to see when the tank is done rinsing

Low Profile Track - Black - 4" Low Profile Track is made from corrosion proof high strength composite material that will last a lifetime. The lowest profile track on the market and a top load design allows for quick and easy setup of all your Scotty accessories. Install Scotty's Low Profile Track on your kayak, canoe, or any other watercraft. Slide the Scotty 438 Gear-Head Track Adapter(sold seperately) into the track, click in your favorite Scotty rod holder or accessory and start fishing. Dimensions: 1-3/4" wide x 3/8" tall x 7" long (4" usable track)

Low Profile Track - Black - 8" Low Profile Track is made from corrosion proof high strength composite material that will last a lifetime. The lowest profile track on the market and a top load design allows for quick and easy setup of all your Scotty accessories. Install Scotty's Low Profile Track on your kayak, canoe, or any other watercraft. Slide the Scotty 438 Gear-Head Track Adapter(sold seperately) into the track, click in your favorite Scotty rod holder or accessory and start fishing. Dimensions: 1-3/4" wide x 3/8" tall x 10-3/4" long (8" usable track)

0440-BK-1 Low Profile Track - 1" The No. 440-BK-1 Low Profile Track is made from corrosion proof high strength composite material that will last a lifetime The lowest profile track on the market and a top load design allows for quick and easy setup of all your Scotty Rod Holders and Accessories Easily install Low Profile Track on your kayak, canoe, or any other watercraft Slide the Scotty No. 438 Gear-Head Track Adapter into the track, click in your favourite Scotty Rod Holder or Accessory and start fishing (Gear-Head Adapter, Rod Holder and Accessories not included) Track Dimensions: 1 3/4” wide x 3/8” tall x (1” usable track)

RAM ROD® Fishing Rod Holder with Dual T-Bolt Track Base This track mounting solution includes the high-strength composite RAM ROD® fishing rod holder, 6” spline post, and dual T-bolt track base. Compatible with the RAM® Tough-Track™ and designed to not loosen while trolling, this track base makes an excellent addition to the left side of a boat. Paired with the included spline post, easily rotate the RAM ROD® fishing rod holder 360 degrees while tilting the cradle forward and back to achieve the ideal angle. Features: Kit includes RAM ROD® fishing rod holder, 6" spline post, and dual T-bolt track base Compatible with all versions of the RAM® Tough-Track™ RAM ROD® fishing rod holder can be rotated 360 degrees and tilted to achieve the desired angle Backed by a lifetime warranty Specifications: Hardware Included: (2) 1/4"-20 x 7/8" T-Bolts; (2) 1/4"-20 Knobs Product Dimensions: 6 in. post length  T-Bolt Dimensions: 0.48 x 0.95 inches Hole Pattern: 3.5 inches Materials: High-strength composite Packaging Type: Retail bag Weight: 1.11 lbs.

9 M SILR Y Dual Side Image Transducer Adapter Cable f/HELIX  Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a transducer switch.  Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a transducer switch.  Used in applications where the a plastic thru the hull transducer is required on a boat with a deep V hull or the motor or other items on the transom of the boat may block one side of the transducer and distort readings.    30" length. Supports MEGA Side Imaging. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

13" Extruded Aluminum Tough-Track™ With the RAM Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks and more. The extruded aluminum version of the RAM Tough-Track can be drilled to any flat surface and is designed for use with #8 screws for easy installation – hardware not included. Made to be a dependable and rugged mounting solution, the anodized aluminum provides a smooth slide across the track and anti-corrosion protection. The RAM-TRACK-EXA-13U features 13” of usable track length, while the included top loading end caps add about 1.5” in length each. Using the end caps allows for two installation options: either use both top loading end caps to create insertion points on both ends of the track, or use one top loading end cap and close the opposite end with the included flush end cap. The Extruded Aluminum Tough-Track is compatible with the RAM Center Loader and 90 Degree Connector, as well as a wide variety of RAM track bases to attach devices like action cameras, fishing rods, phones and tablets. Material: Marine-grade aluminum and high-strength composite Note: Part number reflects product packaged in clear polybag. Weight: 0.36 lbs.

158 1" Ball with Low Profile Track Mount Adapt your Scotty low profile track to our 1″ ball mounting system. For use with all Scotty 1″ ball mounts and Scotty low profile tracks.  Features: 1″ Ball with Track Adapter

168 1-1/2" Ball with Low Profile Track Mount Adapt your Scotty low profile track to our 1.5″ ball mounting system. For use with all Scotty 1.5″ ball mounts and Scotty low profile tracks.  Features: 1.5" Ball with Track Adapter