Continuous Duty Solenoid - 12V - PVC Coated Features: Hex nuts and lock washers are included Steel housing mounting holes: 5/16 x 19/32,” 2 13/64” on centers (7.9 x 15.1, 56.0mm) Plated steel housing available with optional PVC coating available to protect critical components from environmental hazards 12 Volt PVC Coated 65 Amps Insulated Contact: Copper UL Listed

Continuous Duty Solenoid - 12V Minimizes arcing and contact oxidation, maintains highp erformance. Universal use with part numbers available to handle loads up to 200A. PVC Coated option available for a more environmentally sealed product. Coated solenoids withstand moisture and dust to IP66. Mechanical Specifications: SPST Normally open contacts Plated steel housing. Hexnuts and washers included Large (power circuit) battery studs; copper 5/16” -24 thread Small (control circuit) coil studs; steel 10-32 thread Bracket mounting holes 5/16 X 19/32” (7.9 X 15.1mm) on 2 13/64” centers (56.0mm) Available with PVC coated exterior or Potted Coil interiors for harsh environments or vibration resistance Caution: Never unscrew the inner hexnuts on the studs These keep the stud and inner wiring in place

Continuous Duty Solenoid - 200A - 12V Relays are commonly referred to as remote-acting switches and Littelfuse manufacturers a broad range of styles to meet your application. To ensure you are utilizing the proper remote-acting switches, review the attributes in the specifications tab below against your application requirements. Specifications: Current Rating (Continuous) in Amps: 200 Circuitry: SPST Normal Position: Normally Open Contact Material: Silver Housing: Plated Steel

Continuous Duty Solenoid 65 Amp 12V UL Listed Relays are commonly referred to as a remote-acting switches and Littelfuse manufacturers a broad range of styles to meet your application. To ensure you are utilizing the proper remote-acting switches, review the attributes in the specifications tab below against your application requirements. Features: 65 Amp 12V Copper Contact Stud Material Steel Coil Stud Material Normally Open Contacts

65A PVC Coated Continuous Duty Solenoid Remotely switch high amperage loads with a low amperage on-off switch. Features: Continuous duty, 65A at 12V DC Intermittent rating 100A: 10 seconds Copper #10-32 thread signal terminals Copper 5/16”-24 thread contact terminals PVC coated steel case Bracket mounting holes 5/16” x 19/32”, 2-13/64” on centers UL and CE approved Same as Cole Hersee part number 24117-01 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

85A Remote Switching Continuous Duty Solenoid Can be used with Electro-Scan MSDs and other high-amp circuits with remote operation. Features: Continuous duty, 85A at 12V DC Intermittent rating 750A make/100A break, 10 seconds On, 30 minutes Off Insulated ground Steel housing, brass hardware UL listed and CE certified Same as Cole Hersee part number 24059 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

65A Remote Switching Continuous Duty Solenoid Remotely switch high amperage loads with a low amperage on-off switch. Features: Continuous duty 65A, Intermittent duty 100A (10 Sec.) Copper #10-32 thread ignition and ground terminals Copper 5/16"-24 thread contact terminals Plated steel case, copper contacts Hexnuts and washers included Bracket mounting holes 5/16" x 19/32", 2-13/64" on centers UL and CE approved Same as Cole Hersee part number 24059-08 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Continuous Duty Solenoid (CDS) Raritan's Continuous Duty Solenoid is a toilet replacement part. Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heavy-Duty Toggle Switch SPST On-Off 2-Wire Toggle Switches are designed for universal applications within harsh environments. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. The Standard Heavy Duty Toggle Switch Series is our most robust series of toggle switches, available in several configurations of actuators and circuitries. Specifications: Mounting: Nickel Plated Brass Face Nut through 15/32 (11.90mm) Panel Hole *Part Number 5520: Black Finished Face Nut Voltage Ratings: 10A at 36V DC/15A at 24V DC/25A at 12V DC Current Rating (Continuous) in Amps: 10 Voltage Rating (Max): 36 Circuitry: SPST  Input Terminals: 2 Leads (203mm 16AWG Stripped) 1 Plug - 2 Leads (203mm 6AWG Stripped) 1 Plug Housing: Weather-Resistant PVC-Coated Plasticized Housing Actuator: Standard Toggle Actuator Details: Nickel-Plated Brass - 17.4625 Panel Thickness: Up to 1/4 (6.35mm) thick Contact Material: Silver Recommended Torque: On - None - Off

Intermittent Duty Reversing Solenoid - 12V DPDT A combination of two solenoids in one package to reduce cost and maximize space savings while also providing simpler wiring. Two integral solenoids provide dynamic braking for permanent magnet motors when neither coil is energized. This intermittent duty solenoid can be used at a variety of amperages.  Specifications: 75A Make/Break: 5 min On, 5 min Off 125A Make/Break: 30 sec On, 5 min Off 150A Make Break: 0.5 sec On, 5 min Off Circuitry: DPDT Contact Material: Copper Housing: Plastic

Heavy Duty Toggle Switch DPST On-Off 4-Screw Cole Hersee's Heavy Duty DPST Toggle Switch, 4 Screw Terminals, 25 A Standard or long handle. Universal application. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm) except where stated otherwise. phenolic housing, with plated steel cap. Nickel-plated brass mounting hardware. Blade terminals: .250 quick connect. Screw terminals: 6-32 screws. 25A at 12V, 15A at 24V, and 10A at 36V DC.

COLE HERSEE Littelfuse acquired Cole Hersee to offer customers a more extensive portfolio of products in the commercial vehicle market. Cole Hersee is a pioneer and leader in the development of heavy-duty electrical products for the vehicle industry, and have earned a reputation for quality and value. 

100A Engine Starting Intermittent Duty Solenoid Intermittent switching of high amperage loads with a low amperage on-off switch. Features: Rated at 750A make/100A break, this solenoid is for intermittent use only: 10 seconds ON, 20 minutes OFF (ideal for engine cranking) Signal voltage of 12V DC and contact voltage of 6-12V DC #10/32 thread signal terminals Copper 5/16”-24 thread contact terminals Bracket mounting holes 5/16” x 19/32”, 2-13/64” on center Same as Cole Hersee part number M-200 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2-Position SPST PVC Coated Push Button Switch - OFF/(ON) Single pole, single throw switch turns one circuit on and off. Can be used for any single circuit requiring an On-Off style switch. PVC coated to help protect against moisture and dirt. Features: Replacement cap 1001501 Nominal voltage is 6-36V DC Rated for 10A at 12V DC Two 8" 16 AWG wire leads Same as Cole Hersee part number M-608 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SPST PVC Coated Toggle Switch - OFF/(ON) Single pole, single throw toggle switch turns one circuit on and off. Common applications include intermittent horn or windshield wiper control. This toggle switch is PVC coated. Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC, 15A at 24V DC 8" 16 AWG wire lead terminals Mounting stem 15/32" fits panels up to 1/4" thick Same as Cole Hersee part number 55020-04 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.