G2 Satellite Compass - NMEA 0183 with 15M Cable Accurate Heading & Precise Position for Professionals Features: Supports both GPS and GLONASS satellites for complete redundancy Heading accuracy < 0.25° rms Position accuracy < 0.3m 95% confidence (DGPS) An integrated 9 Axis Inertial Measurement Core (IMC technology) provides enhanced roll, tilt and heading stability even during momentary loss of satellite signals IMO Compliant G3 color display system (optional) Engineered enhancements to exceed sealed IP67 rating Extended 2 year warranty NMEA 2000r interface Type approved as primary heading AND positioning device Heave, Pitch, Roll and Rate of Turn as standard output Heading updates 1 to 20 Hz BAUD Rate selectable: 4800, 9600, 19200, 38400,115200 Fully compatible with on board NMEA 0183 RADAR, ECDIS, AIS, Cameras, SONAR, PC and Autopilots Compact integrated surface mounting (Pole mount optional) IMO Compliant, Wheelmark and USCG approved Pre-programmed default settings for Heading, Rate of Turn, Course over Ground, Lat/Long position, Time & Date 1PPS output standard 15 meter serial cable standard (30 meter optional) 6 meter NMEA 2000® Cable (Optional) CE certified for EMI and RFI immunity Worldwide service

G2 Satellite Compass - NMEA 2000 with 6M Cable Accurate Heading & Precise Position for Professionals Features: Supports both GPS and GLONASS satellites for complete redundancy Heading accuracy < 0.25° rms Position accuracy < 0.3m 95% confidence (DGPS) An integrated 9 Axis Inertial Measurement Core (IMC technology) provides enhanced roll, tilt and heading stability even during momentary loss of satellite signals IMO Compliant G3 color display system (optional) Engineered enhancements to exceed sealed IP67 rating Extended 2 year warranty NMEA 2000® interface Type approved as primary heading AND positioning device Heave, Pitch, Roll and Rate of Turn as standard output Heading updates 1 to 20 Hz BAUD Rate selectable: 4800, 9600, 19200, 38400,115200 Fully compatible with on board NMEA 0183 and NMEA 2000® RADAR, ECDIS, AIS, Cameras, SONAR, PC and Autopilots Compact integrated surface mounting (Pole mount optional) IMO Compliant, Wheelmark and USCG approved Pre-programmed default settings for Heading, Rate of Turn, Course over Ground, Lat/Long position, Time & Date 1PPS output standard 15 meter serial cable standard (30 meter optional) 6 meter NMEA 2000® Cable (Optional) CE certified for EMI and RFI immunity Worldwide service

G1 Satellite Compass - NMEA 0183 with 15M Cable Accurate Heading, Position & Rate of Turn Features: Supports both GPS and GLONASS satellites for complete redundancy Heading accuracy < 0.25° rms Position accuracy < 0.3m 95% confidence (DGPS) An integrated 9 Axis Inertial Measurement Core (IMC technology) provides enhanced roll, tilt and heading stability even during momentary loss of satellite signals G3 color display system (optional) Engineered enhancements to exceed sealed IP67 rating Extended 2 year warranty NMEA 2000® interface Heave, Pitch, Roll and Rate of Turn as standard output Heading updates 1 to 20 Hz BAUD Rate selectable: 4800, 9600, 19200, 38400,115200 Fully compatible with on board NMEA 0183 RADAR, ECDIS, AIS, Cameras, SONAR, PC and Autopilots Compact integrated surface mounting (Pole mount optional) IMO Compliant, Wheelmark and USCG approved Pre-programmed default settings for Heading, Rate of Turn, Course over Ground, Lat/Long position, Time & Date 15 meter serial cable standard (30 meter optional) 6 meter NMEA 2000® Cable (optional) CE certified for EMI and RFI immunity Worldwide service

G1 Satellite Compass - NMEA 2000 with 6M Cable Accurate Heading, Position & Rate of Turn Features: Supports both GPS and GLONASS satellites for complete redundancy Heading accuracy < 0.25° rms Position accuracy < 0.3m 95% confidence (DGPS) An integrated 9 Axis Inertial Measurement Core (IMC technology) provides enhanced roll, tilt and heading stability even during momentary loss of satellite signals G3 color display system (optional) Engineered enhancements to exceed sealed IP67 rating Extended 2 year warranty NMEA 2000® interface Heave, Pitch, Roll and Rate of Turn as standard output Heading updates 1 to 20 Hz BAUD Rate selectable: 4800, 9600, 19200, 38400,115200 Fully compatible with on board NMEA 2000® RADAR, ECDIS, AIS, Cameras, SONAR, PC and Autopilots Compact integrated surface mounting (Pole mount optional) IMO Compliant, Wheelmark and USCG approved Pre-programmed default settings for Heading, Rate of Turn, Course over Ground, Lat/Long position, Time & Date 15 meter serial cable standard (30 meter optional) 6 meter NMEA 2000® Cable (optional) CE certified for EMI and RFI immunity Worldwide service

Right Angle NMEA 0183 w/Audio Cable - 7' Network your GPSMAP® 8400/8600 with this NMEA 0183 data communication cable. Includes bare wires and an RCA connector for audio connection to any stereo setup, including FUSION. The right-angle connector helps with the tight fit often associated with flush mounting. Compatible Devices: GPSMAP® 84xx & 86xx (17"-24" Only) Volvo Penta Glass Cockpit System WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NMEA 0183 with Audio Cable Network your compatible GPSMAP® chartplotter with this NMEA 0183 data communication cable. Includes bare wires and an RCA connector for audio connection to any stereo setup, including FUSION. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SC33 Compact Dome Satellite Compass, NMEA2000 (0.4° Heading Accuracy) with 6M Cable Sleek, Fast & Accurate The SC33 Satellite Compass provides highly accurate attitude information for navigation equipment such as Radar, Plotter, Autopilot, Fish Finder and Sonar. With its compact GNSS antenna and built-in processor, it can be used for a wide variety of applications on any type of vessel. This all-in-one system delivers incredibly accurate heading and roll & pitch information as well as heaving information, GPS position, SOG (Speed Over Ground), COG (Course Over Ground) and ROT (Rate Of Turn) data. Employing a two-antenna system with a 3-axis gyro and acceleration sensors, the SC33 enables high-speed response capability. Advanced digital signal processing techniques compute accurate heading based on sensor data. NMEA2000 interface is standard for simple installation, while the optional interface unit IF-NMEASC is available for conventional NMEA0183, AD10 and contact closure. The GNSS antenna and advanced parallel signal processing allows the SC33 to achieve more precise Pitch, Roll and Heading measurement than conventional models, providing enhanced performance for all of your connected equipment. Its Micro-C pigtail NMEA2000 cable provides flexibility to run cables in challenging areas. Revolutionary 2-Antenna & Rate Sensor System In order to calculate roll & pitch data, a satellite compass requires two vectors. The SC33 employs a dual GNSS antenna system that calculates a single vector while a 3-axis rate gyro and acceleration sensors add the 2nd vector. This configuration enables the SC33 to calculate highly accurate roll and pitch data without using a third sensor. Features: Highly Accurate Two Antenna Satellite Compass & Rate Sensor System More resistant to multi-path, shock & vibration, compared to previous models Improved time to first fix (TTFF) = 60 seconds (typical) NMEA2000 Certified Interface/NMEA0183 Interface with IF-NMEASC (Optional) Accuracy: ±0.4° RMS (Heading/Roll/Pitch) Position Accuracy: 5.0M (GPS); 3.0M (GPS + SBAS) Integrated Rate Sensors provide Pitch, Roll and Heave Compensation 6 Meter Micro-C Male/Female NMEA2000 Drop Cable (Standard Supply) Pigtail cable w/NMEA2000 connector for convenient connection to drop cable Tri-axis speed & direction via PGN 130578 & "Heartbeat" PGN output SC33 menu access with NavPilot 300 & TZtouch2 (with impending software update) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NMEA 0183 Weather Station Cable - 15M With NMEA 0183 output only. End in an Airmar 8-Pin connector which can be removed for connection to bare-wire devices. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SCX21 Satellite Compass Utilizing four separate GNSS Antennas for the ultimate in responsiveness, the SCX21 sets a new standard for reliable and accurate heading for all of your marine electronics. The four antennas ensure reliable heading performance, even under the most challenging of conditions. The unprecedented quad antenna design of the SCX21 makes it capable of calculating extremely accurate heading, pitch, roll, and heave information, even when line of sight is limited to only a single satellite. They greatly enhance the performance of onboard equipment such as Radar, Fish Finders, Sonar, and Autopilots. Features: Outputs accurate Time, Position, Heading, COG/SOG, ROT (10 degrees/second), Roll/Pitch/Heave 3-Axis Speed, Air Temperature and Air Pressure data Unprecedented heading accuracy for Radars, Sonars, and Navigation 1.0 degree heading accuracy, 0.02 knot speed accuracy Extremely compact with easy & flexible installation for reduced susceptibility to multi-path interference This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NMEA 0183 Power/Hailer Cable Power your compatible VHF radio with this 6.5-foot, 8-pin power/data cable. Also includes wires for NMEA 0183 connections. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SCX20 Satellite Compass Utilizing four separate GNSS Antennas for the ultimate in responsiveness, the SCX20 sets a new standard for reliable and accurate heading for all of your marine electronics. The four antennas ensure reliable heading performance, even under the most challenging of conditions. The unprecedented quad antenna design of the SCX20 makes it capable of calculating extremely accurate heading, pitch, roll, and heave information, even when line of sight is limited to only a single satellite. They greatly enhance the performance of onboard equipment such as Radar, Fish Finders, Sonar, and Autopilots. Features: Outputs accurate Time, Position, Heading, COG/SOG, ROT (10 degrees/second), Roll/Pitch/Heave 3-Axis Speed, Air Temperature and Air Pressure data Unprecedented heading accuracy for Radars, Sonars, and Navigation 1.0 degree heading accuracy, 0.02 knot speed accuracy Extremely compact with easy and flexible installation for reduced susceptibility to multi-path interference This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RF40 Rudder Feedback Unit with 15M Cable Rudder Feedback for Smooth and Accurate Steering  The RF40 is a medium-duty rudder feedback unit for use with NAC-1 and NAC-2 autopilot systems. Rudder feedbacks measure and report actual rudder angle to your autopilot computer, enabling precise rudder control for smooth and accurate steering. Direct Connection for Simple Plug-and-Play Installation The RF40 is designed for direct connection to NAC-1 and NAC-2 autopilot computers, with variable voltage output and an attached 15 metre (49 foot) cable with plug-and-play connector. The connector can be easily removed for use in other applications. Its extended cable and direct connection make the RF40 an ideal alternative to NMEA 2000® connected sensors, such as the RF25, in situations where it is impractical or otherwise unnecessary to extend a vessel’s NMEA 2000® network within reach of the rudder.

NavPro 900 with MDS-15 WiFi 20" Hi-Res Digital Radome Radar with 15M Cable 9" Touch Screen GPS/Chart Plotter with Wifi, Includes Polaris Chart Card, all Accessory Cables & Internal GPS Receiver/Antenna These powerful MFDs give fishermen, sailors, and cruisers everything they need to navigate, catch fish and safely enjoy their time on the water, Hybrid Touch Control lets boaters operate the system using the large touchscreen display or a combination of robust hard keys, four-directional pad or rotary knob. WI-FI connectivity makes it easy to manage important data and software updates and allows for multiple display options and remote control of NavPro Series MFDs using a smartphone or tablet. Features: Bright, high-resolution LCDs Control the way you want, with an advanced touchscreen or robust keys Offered with integrated or Black Box CHIRP sonar Available in 46-65kHz, 100-140kHz or 160kHz-200kHz CHIRP Easy software updating over the Internet - no PC or app needed Mirror Control second display and remote control via NavPro app Automatic storage and synchronization of important data using Captain Cloud Backed by SI-TEX's 2 Year Warranty and U.S.-based customer service Precision navigation, powerful CHIRP sonar options, and advanced connectivity and control more could today's modern boater want?! 4kW 20" Digital Radome Radar with Internal WiFi Module for all NavPro Units Features: High-Performance Digital Signal Processing Compatible with All SI-TEX NavPro Units Multi-Speed Antenna 4kW High Power Output Ranges from 1/8th of a mile to 36 miles Compact Light Weight 20” Radome WiFi Connectivity 2-Year Warranty

NavPro 900F with MDS-15 WiFi 20" Hi-Res Digital Radome Radar with 15M Cable 9" Touch Screen GPS/Chart Plotter with built-in CHIRP Sounder, Includes Polaris Chart Card, Wifi, all Accessory Cables & Internal GPS Receiver/Antenna These powerful MFDs give fishermen, sailors, and cruisers everything they need to navigate, catch fish and safely enjoy their time on the water, Hybrid Touch Control lets boaters operate the system using the large touchscreen display or a combination of robust hard keys, four-directional pad or rotary knob. WI-FI connectivity makes it easy to manage important data and software updates and allows for multiple display options and remote control of NavPro Series MFDs using a smartphone or tablet. Features: Bright, high-resolution LCDs Control the way you want, with an advanced touchscreen or robust keys Offered with integrated or Black Box CHIRP sonar Available in 46-65kHz, 100-140kHz or 160kHz-200kHz CHIRP Easy software updating over the Internet - no PC or app needed Mirror Control second display and remote control via NavPro app Automatic storage and synchronization of important data using Captain Cloud Backed by SI-TEX's 2 Year Warranty and U.S.-based customer service Precision navigation, powerful CHIRP sonar options, and advanced connectivity and control more could today's modern boater want? 4kW 20" Digital Radome Radar with Internal WiFi Module for all NavPro Units Features: High-Performance Digital Signal Processing Compatible with All SI-TEX NavPro Units Multi-Speed Antenna 4kW High Power Output Ranges from 1/8th of a mile to 36 miles Compact Light Weight 20” Radome WiFi Connectivity 2-Year Warranty

NavPro 1200 with MDS-15 WiFi 20" Hi-Res Digital Radome Radar with 15M Cable 12" Touch Screen GPS/Chart Plotter with Wifi, Includes Polaris Chart Card, all Accessory Cables & Internal GPS Receiver/Antenna These powerful MFDs give fishermen, sailors, and cruisers everything they need to navigate, catch fish and safely enjoy their time on the water, Hybrid Touch Control lets boaters operate the system using the large touchscreen display or a combination of robust hard keys, four-directional pad or rotary knob. WI-FI connectivity makes it easy to manage important data and software updates and allows for multiple display options and remote control of NavPro Series MFDs using a smartphone or tablet. Features: Bright, high-resolution LCDs Control the way you want, with an advanced touchscreen or robust keys Offered with integrated or Black Box CHIRP sonar Available in 46-65kHz, 100-140kHz or 160kHz-200kHz CHIRP Easy software updating over the Internet - no PC or app needed Mirror Control second display and remote control via NavPro app Automatic storage and synchronization of important data using Captain Cloud Backed by SI-TEX's 2 Year Warranty and U.S.-based customer service Precision navigation, powerful CHIRP sonar options, and advanced connectivity and control more could today's modern boater want? 4kW 20" Digital Radome Radar with Internal WiFi Module for all NavPro Units Features: High-Performance Digital Signal Processing Compatible with All SI-TEX NavPro Units Multi-Speed Antenna 4kW High Power Output Ranges from 1/8th of a mile to 36 miles Compact Light Weight 20” Radome WiFi Connectivity 2-Year Warranty