Jog Switch The ComNav Jog Switch is a permanently mounted, watertight eletrical switch specifically designed for marine service. The spring-centered lever is moved to Port or Starboard as desired to provide non follow-up (time dependent) electrical control of the vessel steering system. The Jog Switch can work in conjunction with any autopilot system or can be installed and used as a stand alone system.

Jog Switch with 2 Sets of Switches The ComNav Jog Switch is a permanently mounted, watertight, electrical switch specifically designed for marine service. The spring-centred lever is moved to Port or Starboard as desired to provide non follow-up (time dependent) electrical control of the vessel steering system. The Jog Switch can work in conjunction with any autopilot system or can be installed and used as a stand alone system.

GNA 10 Jog Level Adapter Use the Garmin GNA 10 to connect a jog lever to our Reactor 40 autopilots1 on displacement hull boats. A jog lever is a rugged and simple steering control for workboats or trawlers. Adjust heading hold with the jog lever by pressing it right or left, or put the autopilot into the new Power Steering mode to move the rudder without autopilot guidance. The GNA 10 can also optionally connect to a button and LED light to allow switching between heading hold and standby2. Garmin does not supply the jog lever, button, or LED light. Specifications: Cable length: 2.8 meters Water rating: IPX7 NMEA output: NMEA 2000 NMEA 2000® LEN (Load Equivalency Number): 5 (250mA @ 9VDC) Operating temperature:  -20C to 75C Supply voltage: Powered by NMEA 2000 bus, 9-32V Supported Jog Levers: Kobelt 7170 Jastram JO100/JO300 Simrad S35 (has built-in button and LED status which is supported) The GNA 10 does not support two-speed jog levers with two sets of switches Supported Button Types: DPST OFF-MOM (no diode needed for installation) or SPST (requires diode for installation) Max current of 5mA and a max voltage of 12V Supported LED Types: LED lights with a current draw of 20mA or less 1 The GNA 10 requires both a compatible Garmin autopilot and Garmin display 2 The GNA 10 can also be used to interface a Reactor 40 autopilot with Jastram digital steering controls The GNA 10 with jog lever is designed only for use on displacement hull powerboats. It is not compatible with planning hull boats or sailboats. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Waterproof Trim Tab Switch - Black/Black Buttons The rocker-type switch controls are easy to install and operate. the positive action and silver contact points allow for easy bow-up, port, and starboard correction. The wiring for these switches meets federal standards for heat, pull, and insulation. Each set of switches comes color-coded with a switch plate installed. Black Xylon Coated screws, A 20 Amp fuse, and electrical eye fittings, making installation easy, our rocker switches come standard with all trim tab systems and also adapt easily to other brands of trim tabs.

Push/Pull Switch Two-Position Two-position, off/on. For operating one set of lights or other accessory. These switches have large, easy-to-pull handles. They are commonly used for operating lights. 3/4" diameter chrome-plated knob, brass case. Include screw terminals for connection without a wire lug. For 12-volt D.C. only. Not external ignition protected. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

AC Main +8 Positions / DC Main +29 Positions PN:   8095 White Switches Includes set of 30 common AC and 30 common DC labels All AC and DC buses installed, fully pre-wired Label backlighting pre-installed All LEDs installed Maximum panel Amperage 100 Amperes DC 50 Amperes AC AC Features Red reverse polarity indicating LED 9353, 0-150 Volt AC Voltmeter 9630, 0-50 Amp AC Ammeter DC Features 100 Amp C-Series circuit breaker provides main circuit protection and switching for DC branch circuits 8003, 8-16 Volt DC Voltmeter 8017, 0-100 Amp DC Ammeter Owner upgradeable to 24 Volts with 8240, 18-32 Volt DC Voltmeter Specifications: AC Positions: Source Selectors +8 DC Positions: Main +29 120 Volts AC 12 Volts DC (1) 30A - (5) 15A AC Circuit Breakers (1) 100A - (20) 15A DC Circuit Breakers Combined AC/DC panels require a AC Insulating Cover to meet ABYC Standards WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Groco 9R Set Gasket Set Of 2  

  Scanstrut is an international leader in the design and manufacture of outdoor and marine equipment. Renowned around the globe for its strict product testing, all mounts, chargers, and seals meet the highest and most demanding set of performance standards.     The Scanstrut PowerTower has been designed and engineered to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.   Designed to fit the most up to date radars from Garmin, Lowrance, Raymarine, Simrad, and Furuno Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower No need to cut the radar’s connectors off for installation Marine sealant not required Available in 2 heights Available in Aft or Forward leaning designs Range of accessories light bars can be bolted to the back of the PowerTower     Securely holds and wirelessly charges your phone even in the toughest conditions. Now you can keep your phone in reach, fully charged, and ready to go. 12/24V 100% Waterproof Mount & charge One-handed operation Works with wireless charging enabled phones of all sizes Works through non-metallic, waterproof cases     Scanstrut's range of cabling solutions eliminates time-consuming, sub-standard routing of cables and messy sealant to achieve a 100% watertight installation for your marine cables every time.   IPX68 waterproof range Easy fit cable routing that cuts down your installation time. A guaranteed 100% watertight seal Marine sealant not required       Specials    Closeouts    Remanufactured    Rebates

OneTouch Composite Winch Handles by Dax Labs are now in stock.   You might recall a February 2007 Chandlery review of the Lewmar OneTouch winch handle. The handles'inventor, Don Steiner, has come out with his own, updated, lighter weight version, the Dax OneTouch.   Steiner engineered the OneTouch and sold the license to Lewmar for the metal version, but his Dax OneTouch is made of 50 percent fiber-filled nylon, and all metal parts are high-grade aluminum or stainless. It also has a wider grab bar and higher operating arc than the Lewmar.   The great thing about the OneTouch's innovative technology is that it eliminates the frustrations of using standard locking winch handles. The simple design uses a cam rod with two steel pins that retract into the octagon when the handle's arm is squeezed, releasing the lock; they protract when the handle is released, engaging the lock. This means setting and removing the handle can be done with one hand, in one motion: Squeeze the bar and place it; squeeze the bar and remove it. Another benefit of the Dax OneTouch is the spinning grip. Dual sets of Grade 1 Delrin ball bearings allow fast and easy grinding. And at 10 inches, the handle offers plenty of purchase.  

                               C-MAP MAX-N+ C-MAP MAX-N+ brings trusted Jeppesen data and advanced charting features to users of compatible Lowrance, Simrad and B&G navigation systems. Whether you're an avid saltwater angler, sailing enthusiast or long-range cruiser, these powerful charts will enhance every moment you spend on the water. With huge coverage areas, up-to-date data and state-of-the-art features, no adventure is out of reach.   Simrad & B&G Now Compatible With C-MAP MAX-N+   C-MAP has released the software for both Simrad and B&G Multifunction Displays that will now make them compatible with MAX-N+ along with other enhancements. The newest releases of software for these MFD's now give your customers owning these models and those planning to purchase one an additional cartography option, and one that is now compatible with the all of the content, features & functions of our flagship C-MAP 4D cartography.   What is C-MAP MAX-N+? C-MAP   MAX-N+ brings all the popular C-MAP 4D features to the Navico family of chartplotters, including: The Detailed Harbor Charts, Dynamic Raster Charts, High-Resolution Satellite Imagery, Custom Shaded Depths, Dynamic Tides & Currents, High-Resolution Bathymetric Data, Sport Fishing Data, Aerial Photos, C-Marina Port Info & Multi-Language Charts.      Closeouts     Rebates     Remanufactured    Specials

Deck Foot Switch - Windlass Up - White Plastic Lewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box.  Technical Specifications: Switch Direction - Up Material - Plastic Power - 12/24V Color - White *Sold as an Individual

Deck Foot Switch - Windlass Down - White Plastic Lewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box.  Technical Specifications: Switch Direction - Down Material - Plastic Power - 12/24V Color - White *Sold as an Individual

Lewmar Deck Foot Switch - Windlass Down - Grey Plastic Lewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box.  Technical Specifications: Switch Direction - Down Material - Composite plastic Power - 12/24V Color - Grey *Sold as an Individual

Lewmar Deck Foot Switch - Windlass Up - Grey Plastic Lewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box.  Technical Specifications: Switch Direction - Up Material - Composite plastic Power - 12/24V Color - Grey *Sold as an Individual

Deck Foot Switch - Windlass Down - Stainless Steel Lewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box.  Technical Specifications: Switch Direction - Down Material - Stainless Steel Power - 12/24V Color - Stainless Steel *Sold as an Individual