|
MeteoMan Barometer
The rate of change of barometric pressure and history of wind speed can be an invaluable indicator of imminent conditions.
Many sailors rely on low cost domestic barometers, which are inaccurate, have low resolution and very poor history. Several quality paper recording instruments exist but are delicate, fiddly to use and rely on paper which can jam when damp. The MeteoMan overcomes all these problems. It provides an accurate, high resolution barograph recording in excess of five days data on barometric pressure and wind speed. It is easy to use, reliable, rugged and draws very little power from the boat's battery.
The MeteoMan is available with an optional NMEA Wind sensor which provides wind direction, wind speed and external temperature. The Meteoman provides reliable meteorological information for the yachtsman. The main display shows the wind speed and direction, the ambient temperature and the barometric pressure.
To assist in predicting future trends the unit also displays a precision barograph and an anemograph showing barometric pressure and wind speed for the previous five days.
In addition to the meteorological functions the unit includes a marine chronometer, a stop watch, a race countdown timer, display of internal temperature and battery voltage.
MeteoMan can be connected to an NMEA Clipper Wind system where it will get wind speed/direction data via the Clipper wind output.
NMEA Wind Sensor supplied with mounting brackets and 20 metres of two core screened cable.
NMEA 0183 sentences: Wind speed/direction MWV Temperature XDR
MeteoMan specifications
Atmospheric pressure range
850 to 1100mb (user adjustment to compensate
for altitude)
Pressure history
Range 1 950 to 1050mb
Range 2 980 to 1030mb with 0.5mb resolution
Recording time
0 to 120 hours
0 to 60 hours
0 to 30 hours
Wind speed (when fitted with NMEA wind sensor)
Maximum speed 100 knots
Wind speed history
Range 1 0 to 100 knots
Range 2 0 to 50 knots
Range 3 0 to 25 knots
Recording time
0 to 120 hours
0 to 60 hours
0 to 30 hours
Wind direction (when fitted with NMEA wind sensor)
0 to 360 degrees (in relative mode)
Port 180 degrees to Starboard 180 degrees (innautical mode)
Displayed in analogue and digital format
Resolution 1 degree
Real time clock
12 or 24 hour format
Race countdown timer 10 and 5 minutes
Stop watch with split timing
Temperature
Outside temperature (when fitted with NMEA wind sensor)
Cabin temperature
Resolution 1 degree centigrade
Supply voltage
9.0 to 15.0 volts
The voltage is shown on the display with a resolution of 0.1 volts
Supply current
Operating current 100mA (when fitted with NMEA wind sensor)
Operating current 150mA (with backlight illuminated)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
204.59 |
|
|
March 809 SS HS C Beer Pump
March Pump's 809-SS-HS-C Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for home brewing. It is capable of generating a maximum flow of 7.5 gallons per minute at 3 feet, and its maximum head is 12.1 Feet (or around 5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.75 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The 809-SS-HS-C Beer Pump motor has a six foot cord, a plug, and a base. The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Unit System 60Hz 50Hz Max Flow
7.5 GPM
26.4 LPM
Max Head
12.1 FT
2.5 M
Power
.04 HP
.029 KW
Electrical
115V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/4"MPT
Outlet
1/2"MPT
Wet End
Stainless Steel (Front and Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
Can handle liquids of 250F
Materials are FDA Food Compliant
With 6 Foot Cord and Plug
Components are UL Recognized
American Made
|
466.37 |
|
|
Micropump GJ-N21.FF2S.C Pump Head C Mount
Micropump 82059 GJJN21.FF2S.C
Mag-Drive Gear Pump Head
Requires A-Mount compatible Drive
82059 is constructed of Base Material 316SS
Gear Material PTFE
Shaft Material 316SS
|
1051.96 |
|
|
Micropump GA-T23.P9FS.C Pump Head C Mount
Low flow pump head pressure 0.092 mL/revolution
|
1147.03 |
|
|
Micropump GA-V23.C8FS.C Pump Head C Mount
Micropump Low-flow pump head, pressure-loaded, 0.084 mL/revolution
Max Flow Rate (mL/min): 672
Flow Rate (mL/rev): 0.084
Min Flow Rate (mL/min): 12.6
Differential Pressure (PSI): 40
Differential Pressure (bar): 2.8
Max Motor RPM (rpm): 8000
Seal Material: PTFE
Body Material: 316 SS
Gear Material: Carbon graphite
Relief Valve: No
Run Dry: Under 30 seconds
Duty Cycle Continuous: Yes
Particulates: No
Max Temperature ( F): 350
Min Temperature ( F): -50
Max Temperature ( C): 177
Min Temperature ( C): -46
Max Viscosity (cP): 100
Model Number: GA-V23.C8FS.C
Part Number: 82117
|
1147.03 |
|
|
March 815 PL C Beer Pump
March Pump’s industrial 815-PL-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI).
At 60Hz
SystemUS Metric
Max Flow8 GPM 30.3 LPM
Max Head18.6 FT 5.7 M
Power0.04 HP 0.029 KW
At 50Hz
USMetric
7.9 GPM30 LPM
13.5 FT4.1 M
0.04 HP0.029 KW
Electrical: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/8"FPT & 3/4"MPT
Outlet: 1/2"MPT
Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
Max Internal Pressure: 50 PSI / 3.4 bar
Max Liquid Temperature: 250 °F / 121 °C
Applications for the 815-PL-C Magnetic Drive Pump include home brewing, hot water systems, solar heating, and fryers.
The 815-PL-C has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water.
|
332.48 |
|
|
Ampco Pumps C+114/C+214-BUNA Seal Kit Buna
|
120.51 |
|
|
Tuthill 2C2B-C-7 Mechanically Sealed Pump
Tuthill 2C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 8 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1 inch NPT, Discharge Port is 1 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Mechanical Seal Viton
Port Size:Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT.
|
845.58 |
|
|
Tuthill 4C2B-C-7 Pump 36 Gpm 1 1/2Ports
Tuthill 4C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Mechanical Seal Viton
Port Size:Inlet Port is 1-1/2 inch NPT
Discharge Port is 1-1/2 inch NPT.
|
1174.02 |
|
|
Tuthill 4C2EN-C-7 Pump 36Gpm 1 1/2 Ports With
Tuthill 4C2EN-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Ball Bearing on Shaft. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Sleeve Bushing Lip Seal Viton
Port Size:Inlet Port is 1-1/2 inch NPT
Discharge Port is 1-1/2 inch NPT.
|
1319.88 |
|
|
Tuthill 4C2FV-C-A-7 Gear Pump (505000)
Tuthill 4C2FV-C-A-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Has Internal Relief Valve. Relief valve is set at 90 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view). Tang Shaft. Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.
Features :
Pump Body:Cast Iron
Relief Valve:Relief valve is factory set to 90 PSI for adjustment between 30-225 PSI. Other PSI ranges available.
Shaft Seal:Sleeve Bushing Lip Seal Viton
Port Size:Inlet Port is 1-1/2 inch NPT
Discharge Port is 1-1/2 inch NPT.
|
1414.74 |
|
|
Groco S-87-C Tie Rod .250 X 15.313
|
21.94 |
|
|
Groco Ht-3560-C Handle &Amp; Grip
|
76.05 |
|
|
Groco ARG-501-C Cap, Bronze
Bronze Cap
For strainers after Sept 1, 2001 (010901)
Does not come with O-rings
Order O-rings Part #(2-135) & (2-228) Separately
|
78.59 |
|
|
Groco Sp-49-C Pump Body W/Only Insid Thrd
|
161.40 |
|