|
If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief. All Clipper instruments have giant digits and multilevel backlighting.
Technical Specifications:
40mm high digits
Depth below transducer/below keel/below surface
Deep and shallow alarms (audio and visual)
User selectable feet or meters
Intellegent gain control & manual override
Selectable display rate and depth averaging rate
Depth trend indicator
No echo indicator
High transmit power
All settings stored in non volatile memory
Tactile keypad
Consumption 20mA + 25Ma for backlight (max)
***Note - this is not a stand alone unit and cannot be connected to a depth transducer. It must be connecetd to the Clipper Depth master display unit.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
115.70 |
|
|
The Clipper GPS repeater has quickly established itself as the market leader in cockpit GPS repeaters. Typical of the Clipper range it boats large clear digits and simple operation. Installation coundn't be simpler with just two wing nuts to fasten the unit into the panel ans two wires to connect to the GPS.
Technical Specifications:
Standard 110mm case
Super large high contrast LCD
Four instantly accessable display screens
Standard NMEA 0183 interface suits most
Complete with weather cover and 10 meters of cableThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
169.31 |
|
|
The Clipper Compass Repeater has all the features of the master unit and an independent off course alarm.
Steer to course function
When the steering function is selected a series of chevrons accumulate showing the magnitude and direction of the steering error. To stay on course simply turn the wheel in the direction of the chevrons until they are extinguished. The steering sensitivity can be preset by the user. An off course alarm provides a safety feature when not at the helm. If the heading deviates by more than a preset amount then the alarm will sound.
Technical Specifications:
Adjustable Damping
1 degree display resolution
Display case size 110 x 110mm
Depth behind panel 30mm
Complete with 5 meter cable, 'O' ring and weather cover
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
144.12 |
|
|
Wind Repeater Display
Add or replace the display on the Clipper Wind V2 – 3 wire wind mast unit and the Clipper Wireless wind unit.
The Clipper Wind NMEA Repeater has user a selectable pointer style and selectable wind speed scale. It requires the standard NMEA 0183 MWV data sentence.
Technical Specifications:
Works with NMEA 0183 NMEA protocol
7 levels of display backlighting
Dimensions (H x W x D) - 4.33" x 4.33" x 1.18" (110 x 110 x 30mm)
In the Box:
16.5' (5 M) Cable
Mounting 'O' ring
Weather cover
*Sold as Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
115.70 |
|
|
The Clipper Log Repeater has its own independent alarm function as well as repeating all data from the master unit.
Technical Specifications:
40mm high digits
7 level display backlighting
Complete with 5 meter cable, 'O' ring and weather cover
Consumption 10mA + 25mA for display backlightThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
115.70 |
|
|
Wireless Masthead & Data Box
The mast head transmitter is completely wireless and is supplied with a base unit, which is powered by the vessel's 12Vsupply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to any compatible NMEA display unit.
Wireless wind speed and direction data to any compatible NMEA display The masthead transmitter requires only occasional bright daylight falling on the solar panel to top up its internal battery. It will operate for 2000 hours without further solar charging from its fu lly charged battery.
Easy insta ll ation with mast in place no wires to run down
Simple masthead alignment through base unit
Light weight - 190 grams
Specifications:
Sleep time > 15,000 Hours *
Operating time > 2,000 Hours *
Charging time < 150 Hours of bright daylight
* Fully charged with no further daylight
NMEA 0183 4800 Baud
0/P Level 0 to 12 volt
from 220 ohm source resistance.
NMEA data sentence MWV
Supply voltage 6 to 16 volts. (Nominal 12 volts)
Supply current 17mA
Fuse 1 Amp.
Display
Wind speed and direction data to any compatible NMEA device
The Clipper Wind Repeater disp lay is presented in the industry standard 11Omm square case. It boasts an exceptionally large and clear display with 60 segments for full 360 degree direction indication.
Display Unit Spcifications
Supply voltage Nomina l12V DC
NMEA 0183 input sentence MWV
9 levels of display backlighting
Display case size 110 x 11Omm
Depth behind panel 30mm
Consumption, 1OmA+ (1OmA for display illumination max)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
532.49 |
|
|
If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief. All Clipper instruments have giant digits and multilevel backlighting.
Technical Specifications:
40mm high digits
Depth below transducer/below keel/below surface
Deep and shallow alarms (audible and visual)
User selectable feet or metres
Intelligent gain control & manual override
Selectable display rate and depth averaging rate
Depth trend indicator
High transmit power
All settings stored in non-volatile memory
Tactile keypad
Complete with weather cover and transducer
Consumption 20mA +25Ma for backlight (max)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
229.64 |
|
|
Spare 150kHz depth transducer with 7 meter cable.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
68.06 |
|
|
March 809 SS HS C Beer Pump
March Pump's 809-SS-HS-C Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for home brewing. It is capable of generating a maximum flow of 7.5 gallons per minute at 3 feet, and its maximum head is 12.1 Feet (or around 5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.75 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The 809-SS-HS-C Beer Pump motor has a six foot cord, a plug, and a base. The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Unit System 60Hz 50Hz Max Flow
7.5 GPM
26.4 LPM
Max Head
12.1 FT
2.5 M
Power
.04 HP
.029 KW
Electrical
115V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/4"MPT
Outlet
1/2"MPT
Wet End
Stainless Steel (Front and Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
Can handle liquids of 250F
Materials are FDA Food Compliant
With 6 Foot Cord and Plug
Components are UL Recognized
American Made
|
466.37 |
|
|
Micropump GJ-N21.FF2S.C Pump Head C Mount
Micropump 82059 GJJN21.FF2S.C
Mag-Drive Gear Pump Head
Requires A-Mount compatible Drive
82059 is constructed of Base Material 316SS
Gear Material PTFE
Shaft Material 316SS
|
1051.96 |
|
|
Micropump GA-T23.P9FS.C Pump Head C Mount
Low flow pump head pressure 0.092 mL/revolution
|
1147.03 |
|
|
Micropump GA-V23.C8FS.C Pump Head C Mount
Micropump Low-flow pump head, pressure-loaded, 0.084 mL/revolution
Max Flow Rate (mL/min): 672
Flow Rate (mL/rev): 0.084
Min Flow Rate (mL/min): 12.6
Differential Pressure (PSI): 40
Differential Pressure (bar): 2.8
Max Motor RPM (rpm): 8000
Seal Material: PTFE
Body Material: 316 SS
Gear Material: Carbon graphite
Relief Valve: No
Run Dry: Under 30 seconds
Duty Cycle Continuous: Yes
Particulates: No
Max Temperature ( F): 350
Min Temperature ( F): -50
Max Temperature ( C): 177
Min Temperature ( C): -46
Max Viscosity (cP): 100
Model Number: GA-V23.C8FS.C
Part Number: 82117
|
1147.03 |
|
|
March 815 PL C Beer Pump
March Pump’s industrial 815-PL-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI).
At 60Hz
SystemUS Metric
Max Flow8 GPM 30.3 LPM
Max Head18.6 FT 5.7 M
Power0.04 HP 0.029 KW
At 50Hz
USMetric
7.9 GPM30 LPM
13.5 FT4.1 M
0.04 HP0.029 KW
Electrical: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/8"FPT & 3/4"MPT
Outlet: 1/2"MPT
Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
Max Internal Pressure: 50 PSI / 3.4 bar
Max Liquid Temperature: 250 °F / 121 °C
Applications for the 815-PL-C Magnetic Drive Pump include home brewing, hot water systems, solar heating, and fryers.
The 815-PL-C has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water.
|
332.48 |
|
|
Ampco Pumps C+114/C+214-BUNA Seal Kit Buna
|
120.51 |
|
|
Tuthill 2C2F-C Pump 9Gpm Direct Mount
Cast Iron Rotary Gear Pump
Pump End Only
8 GPM C Series
Cast Iron Construction
Flange mount
Clockwise rotation only (from shaft end view)
Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT
|
652.38 |
|