Digi-Troll IV Transducer Provides bottom tracking ability to Digi-Troll IV downriggers. Network up to six downriggers to troll at set distances from the bottom through this single transducer. Includes mounting bracket and hardware. Part Number: 1491072 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Big Body Cannon Lock Locks large-bodied downriggers securely to the boat with a pin-tumbler lock. Fits Digi-Troll 10, Digi-Troll 5, Mag 5 ST and Mag 10 STX models. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual-Beam Transducer with Transom/Trolling Motor Mount for echo™ Series Fishfinders Want to use your echo series fishfinder in more than one vessel? A second transducer can make the process a lot easier. It comes with all of the hardware you need to mount on your transom or trolling motor. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

B175MW Med Ultra Wide 1kW, 20° Chirp Thru-Hull Transducer f/12-Pin Garmin175MW Med Ultra Wide 20 Degree, 1KW Chirp Thru-hull Transducer with 12 Pin Connector for Garmin  Airmar's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column. Airmar’s Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow. The B175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20° angle. Because the transducer is installed almost flush with the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer. Features: Fixed 20° tilted version for 16° to 24° hull deadrise 12 Pin Connector for Garmin FishFinders Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing, or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology Specifications: Brand: Airmar Technology Acoustic Window: Urethane Cable-Length: 9 m (30'), 10 m (33') Common Use: Fishing Connector: Garmin 12-Pin Country of Origin: USA Display Connector: 12G Functions: Depth, Temperature Hole Size: 95 mm (3-3/4") Hull Material: Fiberglass or wood Material: Bronze Max Deadrise Angle: 24° Max Depth: 400 m (1300') Max Vessel LOA: Up to 11 m (36') Medium Frequency: 60-100 kHz Medium Frequency Beamwidth: 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Medium-Wide Beamwidth: 57° to 73° beam p/s 16° average f/a Mounting Style: Tilted Element Thru-Hull Power Rating: 1 kW Single or Dual Frequency: Single Tilt Angle: 20° Tilted Element: Yes Water Temperature: -10° to 40°C (14° to 104°F) Weight: 2.7 kg (6 lbs.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Lexan Depth Transducer f/ST60 & ST290 P19 Plastic Low Profile Through Hull Transducer Key Features Includes 45' cable Frequency: 200 kHz Compatible hull material: metal & fiberglass Hole diameter for installation: 2" Compatible models ST60+ i50 ST70 / i70 (requires ST70 depth pod or ITC5 - sold separately)

XTM 9 20 MSI T Trolling Motor Transducer f/MEGA Units MEGA SI, MEGA DI, DualBeam PLUS, 20/60/86/55 degrees, 200/83/455/800 kHz and 1.2 MHz, temperature built-in trolling motor transducer. For HELIX MEGA Side Imaging units only. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SI-TEX 492/50/200ST Transom Mount Transducer f/ES502 Dual Frequency 50/200 kHz Max Power: 500W Beam Angle: 42 deg. @ 50 kHz, 12 deg. @ 200 kHz Housing: Plastic Mount: Transom Plug: 8 Cable: 30' Temp: Yes Speed: Yes For SI-TEX model: ES502

P66 Transom Mount Transducer f/Humminbird 9-Pin Units Features: Depth and temperature in one housing Plastic kick-up bracket Accommodates transom angles between 2° and 20° Recessed waterflow channel protects paddlewheel Transducer can be removed from bracket without the use of tools for easy service and storage Boat Size: Up to 12M (40') Frequency: 50/200 kHz Beamwidth: 50 kHz-45°, 200 kHz-11° RMS Power: 600W 10M Cable Fits: All 800, 900 & 1100 Series except 967 3D This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Thru-Hull Multibeam Transducer f/DDF3D The 165T-B54 is a multi-beam transducer for the DFF3D that affords a 120° port-starboard view of the underwater world. Its compact design allows for easy installation. A built-in motion sensor stabilizes the display to give clear and stable images, even under rough sea conditions. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SI-TEX 307/50/200T Transducer f/CVS-832 Dual Frequency 50/200 kHz Max Power: 1kW Beam Angle: 22 x 45 deg. @ 50 kHz, 6 x 11 deg. @ 200 kHz Housing: Bronze Mount: Through Hull Plug: 8 pin Cable: 30' Temp: Yes Speed: No For SI-TEX model: CVS862, 832C, 833C, Genesis

SI-TEX 492/50/200 In-Hull Transducer f/ES502 Dual Frequency 50/200 kHz Max Power: 500W Beam Angle: 42 deg. @ 50 kHz, 12 deg. @ 200 kHz Housing: Plastic Mount: In-Hull Plug: 8 pin Cable: 30' Temp: No Speed: No For SI-TEX model: ES502

CPT-DV Trandsom Mount Transducer f/Dragonfly 4 & 5 The CPT-DV should be used with the new Dragonfly 4DV and WiFish. Features Depth and temperature CPT-DV cable length is 4m (13.1 ft.)

120 kHz Lexan Low-Profile Thru-Hull Transducer f/SDD-110 Seawater Depth Indicator.

120kHz Bronze Thru-Hull Transducer f/SDD-110  Features: 120kHz Bronze Thru-Hull Transducer Specifically for SI-TEX SDD-110

Easi-Troll ST More control at every turn. Take command of controlled depth fishing when you equip your boat with our Easi-Troll™ manual downriggers. Perfect for smaller boats, each model allows for quick line retrieval and controlled, one-handed weight descent. FAST RETRIEVAL RATE Our Easi-Troll models feature an innovative design that lets you pull your lines back in with less cranking effort. The quicker you can retrieve your lines, the quicker you can get back to catching fish. CONTROLLED WEIGHT DESCENT Get controlled, accurate bait positioning thanks to the One-Hand Clutch Deploy on all Cannon manual downriggers. It's designed to gradually, precisely lower your weight and lure into the strike zone. Features: Fast, effortless 1.5:1 retrieval speed One-Hand Clutch Deploy for simple, precise bait positioning Enclosed boom end pulley prevents line jumping Easy-Access Universal Mounting Base - same as our electric models Single axis rod holder - fully adjustable, both front to back and side to side 24" Stainless Steel Boom Ergonomic crank handle Three-digit depth counter Pre-spooled with 150' of 150-lb test stainless steel cable and includes a line release Limited lifetime warranty WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.