WS310 Wind Pack Wired Includes: Wired wind sensor Bracket 20m Mast Cable Network interface Micro-C T joiner  Fixings kit A high precision wired wind sensor, designed for cruising and club racing sailors. The B&G WS310 wind sensor offers high performance data accuracy, with improved aerodynamics suitable for all yachts. Pack includes 20M cable and WS310 Interface.  The WS310 wind sensor is the perfect solution for any sailor looking to get accurate and fast wind data to their instruments from a wired wind sensor. High Performance Designed to provide highly accurate wind data in all conditions at all points of sail and heel. Reliability Thousands of hours of real-life testing have proved this instrument to be exceptional in all conditions, providing fast and accurate data at all times.

WS310 Wired Wind Sensor Only A high precision wired wind sensor, designed for cruising and club racing sailors. The WS310 wind sensor offers high performance data accuracy, with improved aerodynamics suitable for all yachts. The WS310 wind sensor is the perfect solution for any sailor looking to get accurate and fast wind data to your instruments from a wired wind sensor.  High Performance Designed to provide highly accurate wind data in all conditions at all points of sail and heel. Reliability Thousands of hours of real-life testing have proved this instrument to be exceptional in all conditions. Providing fast and accurate data at all times *Requires WS300 Cable (20, 35, 50 or 80m). WS310 (wired) Interface required if connecting to a NMEA 2000 network. Features: Superior data accuracy and aerodynamics Sensor quality Unbeatable reliability Specifications: Waterproof rating: IPx6 (spray), IPX7 (immersion) Weight: 0.66 lbs Power consumption typical: <0.1 W Supply voltage: 12V DC (9-16V DC) Operating temperature range: 5 degrees F to 131 degrees F Warranty period: 2 years Storage temperature range: 4 degrees F to 140 degrees F Dimensions WxHxD: 20" x 13" x 2" Approvals compliance: IEC/EN 60945 NMEA 0183 Sentences supported: MWV, R at 10Hz

WS310 Wired Wind Sensor with 35M Cable with Interface Cable The WS310 wind sensor pack is the perfect solution for any sailor looking to get accurate and fast wind data to your instruments from a wired wind sensor. High Performance Designed to provide highly accurate wind data in all conditions at all points of sail and heel. Reliability Thousands of hours of real-life testing have proved this instrument to be exceptional in all conditions. Providing fast and accurate data at all times. Comes with: WS310 Wind Sensor - 000-14391-001 WS310 (wired) Interface - 000-14389-001  WS300 35M (115') CABLE - 000-14397-001

Triton² Speed/Depth/Wind System Pack - Wired Wind Pack The clearest, multi-purpose sailing instrument with dedicated sailing features. Features: Optically bonded 4.1-inch color display Transflective LCD technology for optimum sunlight viewing Unique sailing features including SailSteer and WindPlot Display wind, speed, depth, heading, autopilot status, and much more Easy to use, easy to install Low power consumption The full-color Triton² Display provides sailors with a clear visual representation of key instrument data including Speed, Depth, Wind, Heading, AIS targets, GPS data, and more. An Optically Bonded display means absolutely zero condensation or fogging, while transflective LCD technology provides exceptional contrast and visibility – day or night – while consuming less power than traditional backlight-only displays. The flexible, NMEA 2000® certified, Triton² Display can be integrated into a wider navigation system and also be combined with a Triton² Pilot keypad and NAC autopilot computer to create a complete autopilot control system, featuring B & G sail-specific autopilot steering algorithms. Specifications: Dimensions: 118 x 115 x 36 mm (4.6 x 4.5 x 1.4") Weight: 0.32 kg (0.7 lbs) Color: Black Display Size: 4.1" (diagonal). 4:3 Aspect ratio Display Type: Transflective TFT-LCD, bonded. White LED backlight Display Resolution: 320 x 240 pixels Illumination: White for day mode. Red, green, blue, or white for night mode What's in the box? 000-13294-001 Triton² Digital Display. 000-15735-001 IDST-810 active D/S/T TH plastic 235 kHz transducer. 000-10760-001 2k Backbone Starter Kit 000-14391-001 WS310 Wind Sensor 000-14396-001 N2K Wind Mast cable 20 m 000-14389-001 ws310 wired interface only

i70s Wireless Wind Pack  Maximum Visibility and Maximum Versatility The i70s multifunction gives you the flexibility to display instrument and navigation data that is most important to you. Equipped with a bold and bright 4.1” display the i70s is easy-to-customize with digital, analog, and graphical displays of depth, speed, wind, and more. Add the i70s to your existing Raymarine instrument system or create a network of i70s displays and sensors, the choice is yours. Features: 4.1” super bright oversized LCD for maximum visibility All-weather optically bonded display technology delivers brighter colors, sharper contrast, and a wide viewing angle Glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays Simple user interface with sculpted rubber keypad for precise operation in all conditions Customizable data displays of depth, speed, wind, and more SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks NMEA2000 connectivity* for engine, environment fuel, and navigation data Convenient AIS repeater mode allows you to visually track nearby AIS targets Combine the i70s with the ITC-5 instrument transducer convertor and connect to analog depth, speed, and wind sensors Network the i70s with Airmar DST800 transducers and the new in-hull P70s smart transducer Supplied with both black (eS Series style) & (e Series style) gunmetal bezels and protective sun cover *NMEA2000 certification pending. A DeviceNet to SeaTalkng adaptor is required for connecting the i70s to the NMEA2000 backbone. Intuitive LightHouse User Interface The i70s places frequently used navigation functions right at your fingertips. The LightHouse instrument interface is consistent with Raymarine LightHouse multifunction displays, so Raymarine MFD users will feel right at home with the i70s. Networking Raymarine i70s allows for connectivity to the following onboard networks: First-generation SeaTalk networks using a SeaTalk to SeaTalkng adapter cable Current generation SeaTalkng networks NMEA2000 networks using a SeaTalkng to DeviceNet adaptor In addition to flexible networking capability, the i70s features user-selectable data sources, for integration with multi-sensor networks. The Wireless Advantage The Micro-Talk Gateway enables performance-minded sailors to take advantage of the enhanced accuracy and installation convenience offered by Raymarine’s wireless, solar-powered wind transmitter options. Now it’s possible to use these ultra-lightweight and highly accurate sensors with Raymarine i60, i70, and i70s Instrument systems. When used in conjunction with the optional Raymarine Wireless Mast Rotation Sensor, the system can also provide ultra-precise wind information onboard sailing craft with rotating masts including winged sailboats. The mast rotation angle is also transmitted to Raymarine LightHouse II (v17) Multifunction Displays. Mirco-Talk™ Wireless Gateway Raymarine’s new Micro-Talk Wireless Performance Sailing Gateway seamlessly joins together wired and wireless systems enabling you to achieve all-new levels of high-performance sailing! Benefits include: Performance sailing with wireless wind enhancement on your Raymarine MFD; with accurate lay lines Use the power of your Raymarine MFD to inspire enhanced competitive sailing True wind achieved with sophisticated airflow and yaw algorithms Provides real-time data with a robust and fast refresh rate Mast rotation position sensing, for wing sailboats Quick installation, light and wireless connection to the wind vane Low power when used with Raymarine solar-powered wireless devices T120 Wireless Wind Transmitter The solar-powered Raymarine® T120 Wireless Wind Transmitter sends data wirelessly to Raymarine wireless displays. Features: Functions include: Wind Speed Wind Angle Solar-powered wireless masthead transducer sends key wind data to Raymarine wireless cruising instruments via wireless link Simple to install, even with the mast in place – with no wires running down your mast or through your hull Calibration for wind speed and direction at your wind display Includes: E70361 T120 E70617 T113 E70327  A06049  A06036 A06064 A06031 A06028

GNX™ Wireless Wind Pack The Information You Need to Set Sail Includes GNX™ Wind instrument and gWind™ Wireless 2 transducer GNX Wind provides 2 data fields and a digital wind rose to simultaneously display true and apparent wind data, Steer Pilot, boat speed and more Displays true and apparent wind speed and wind angles, true wind direction, boat speed, speed over ground, VMG, heading, course over ground and closed haul Includes easy-to-install gWind Wireless 2 transducer, which eliminates cables for masts up to 50 feet Internal solar-charged battery lasts 3 years and is easily replaced When you have a GNX Wind instrument combined with a gWind Wireless 2 transducer, you’ll know what’s going on with the wind. GNX Wind Instrument GNX Wind gives you the wind data necessary to make confident decisions. Featuring high-visibility, glass-bonded backlit monochrome LCD display with customizable backlight colors, GNX Wind interfaces through the NMEA 2000® network to show 2 data fields and a digital wind rose simultaneously to display true and apparent wind data, steering guidance, boat speed and more. Low power consumption of 350 mW daylight (no backlight) and 400 mW nighttime (mid-level backlight) is perfect for sailboats. Customizable user settings allow you to configure the screen layout to your preferred setting. Display configurations include more than 15 important marine parameters for wind, speed and navigation. It can even wirelessly connect to a quatix® 3 GPS marine smartwatch via ANT®technology to stream wind data directly to your wrist.  Wind Wireless 2 Transducer Wind Wireless 2 offers an easy-to-install solution that eliminates running wires through masts up to 50 feet. Accurate wind signals are sent via an ANT connection directly to a GNX Wind instrument or to a compatible Garmin GPSMAP® chartplotter. The transducer features renowned Nexus® twin-fin technology with a 3-bladed propeller, providing accurate wind speed and stable wind angle in lighter wind conditions. Also available in a wide selection of Wind and Sail Packs (sold separately) that can be used as stand-alone wind systems or expanded to full network systems via NMEA 2000. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Furuno FI70BW Basic Wind Package Our professionally designed FI70 instrument series is designed to meet the needs of sail boaters and power boaters alike. The FI70BW package offers a solution to boaters looking for an economical solution to display wind speed and direction. The FI70BW package consists of the FI5001 Wind Sensor and FI70 Digital Data Display. The package includes the IF-NMEAFI Analog-NMEA2000 converter as well as the FI5002 Junction Box for a simple installation and full compatibility with other navigation equipment. Whether you use these instruments by themselves or as a part of your NavNet system, the FI70BW will add both function and beauty to your helm. The FI5001 is an analog Wind Transducer capable of detecting wind angle accuracy of better than q10x and wind speed accuracy of better than +/-5% (20 kt). Apparent wind direction is displayed on the FI70 Display.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Sail Performance Sensor Pack (WS320, ZG100, DST810, N2K) An all-in-one core data components kit, that includes all you need for your boat network. This pack includes a WS320 wireless wind pack for highly accurate wind information, which is easy to install. The IDST810 depth, speed, and temperature sensor and a GPS ZG100 Module pack for all your positioning data, including heading, heel, and trim. This pack also includes the Micro-C backbone kit, and 2M, and 5M N2K cables for all your wiring and installation requirements. WS320 wireless wind sensor (000-14383-001) The perfect solution for any sailor looking to get accurate and fast wind data to their instruments, which is easy to install without a cable through the mast. Designed to provide highly accurate wind data in all conditions at all points of sail and heel. WS320 has been benchmarked against multiple different sensors in over 500 individual wind tunnel tests. Easy to install and lightweight, ideal for smaller boats – without compromising performance for wireless convenience. WS320 has the same accuracy (both wind angle and wind speed) as the wired version while outputting wind at a super smooth 5 times every second. As the most exposed sensor on a yacht, the wind sensor – critical for instruments and autopilot steering – must meet an exceptionally high standard. In addition to B & G’s extreme testing program, the WS320 sensors have been subject to combined field tests of over 200,000 hours. DST810 MultiSensor (000-15735-001) A compact multisensor that offers the depth, speed, and temperature data from a single through-hull sensor that can be easily installed and connected directly to the network. Patented, speed-signal-processing enhancements provide excellent paddlewheel accuracy below 5 knots (6 MPH) and smooth linear output at all vessel speeds. The transducer’s wide, fan-shaped, port-starboard beam is able to find the bottom even when installed on steep deadrise hulls or heeling sailboats. You also get true water-temperature readings with the DST810’s reliable temperature sensor. ZG100 GPS (000-11048-002) The ZG100 GPS antenna provides precise and dependable position data making it the perfect partner for B & G chartplotters and instrument systems. The highly accurate 10 Hz GPS gives precise and smooth update of position information during acceleration and manoeuvring, rapid signal acquisition and consistent position accuracy augmented by secondary satellite systems like WAAS, EGNOS, MSAS and Galileo. It is also QZSS-ready. The integrated compass delivers accurate heading information for instruments, chart stabilisation for Head Up mode and Radar overlays. It also provides Heel and Trim data for sailing. Micro-C Backbone Kit & Cables (000-10760-001) NMEA 2000 Micro-C Network starter kit: Includes Network power cable, 4.5 m (15 ft) N2K cable, 3 x T-connectors, 2 x network terminators. Also included is 1x 2m and 1x 5m N2K cables.

GNX™ Wired Sail Pack 52  GNX™ Wind, GNX™ 20, gWind™ Wired and DST810 transducers The Information You Need to Make Confident Decisions Includes GNX Wind, gWind™ Wired, GNX™ 20 and Airmar DST810 transducer GNX Wind and GNX 20 instruments have highly visible monochrome LCD displays gWind Wired transducer features 3-bladed propeller and twin-fin design DST810 thru-hull smart transducer provides water depth, water speed and water temperature data – plus attitude sensing for heel/trim and pitch/roll inputs Wireless connectivity to devices with BLUETOOTH® technology enables DST810 calibration directly through Airmar’s Cast app Easy plug-and-play installation between Nexus®, Garmin chartplotters, NMEA 2000® and USB Know the Wind and Water With a GNX Wind Wired Sail Pack, you will have all the equipment you need to know what’s going on with the wind and the water. GNX Wind Marine Instrument GNX Wind gives you the wind data necessary to make confident decisions. Features high-visibility, glass-bonded backlit monochrome LCD display with customizable backlight colors. It also interfaces through the NMEA 2000 network to show 2 data fields and a digital wind rose simultaneously to display true and apparent wind data, steering guidance, boat speed and more. Low power consumption of 350 mW daylight (no backlight) and 400 mW nighttime (mid-level backlight) is perfect for sailboats. Fully customizable user profiles allow you to configure the screen layout to your preferred setting. Display configurations include more than 15 important marine parameters for wind, speed and navigation. It can even wirelessly connect to a quatix® 3 GPS marine smartwatch via ANT technology to stream wind data directly to your wrist. gWind Wired Transducer gWind transducer features twin-fin technology with 3-bladed propeller for more accurate True Wind Speed (TWS) in lighter air while the twin-fin design gives a more stable True Wind Angle (TWA). The 3-bladed propeller, unlike a cups design, is always efficient. Combined with optic reading, this transducer provides superior accuracy at low wind speeds and also provides for excellent linearity. GNX 20 Marine Instrument The easy-to-read GNX 20 marine instrument display with black digits on a white or color background clearly shows water depth, boat speed through the water, water temperature and 50-plus marine and boat parameters. Its glass-bonded display with anti-glare lens coating provides excellent daytime and nighttime readability with high-contrast digits scalable up to 36 mm. Airmar DST810 Thru-hull Smart Transducer DST810 combines precise depth, speed and temperature data with altitude sensing for heel/trim and pitch/roll inputs — which it provides to the NMEA 2000® network and GNX 20 instrument. This multisensor transducer can read depths to 330 feet, offers fast 5 Hz water speed signal output and has an operating frequency of 235 kHz with a fan-shaped beamwidth of 10x44 degrees. Additionally, wireless connectivity to devices with BLUETOOTH® technology enables DST810 calibration directly through Airmar’s Cast app. Advanced speed calibration allows for calibration at multiple heel angles and speeds. In The Box: gWind™ transducer GNX™ 20 marine instrument GNX™ Wind marine instrument GND™ 10 black box bridge Airmar DST810 thru-hull smart transducer 3 NMEA 2000® drop cable (2 meters) NMEA 2000® power cable 5 NMEA 2000 T-connectors NMEA 2000 terminators Mast cable with female connector (25 meters) Nexus female field installable connector Mast bracket Mounting hardware Documentation The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Garmin is under license.

N2K Wind Mast Cable 20M 20M (66 ft) NMEA2000 Wind vane cable (Micro-C male - Simnet) 

608 Wind Sensor Without Cable Networked wind sensor for Triton2, Triton, IS42, IS40 and IS20 systems. Sensor only, does not include cable. Compatible with previous 508 and IS20 wind sensor mast cables and brackets.

213 Wind Sensor/Masthead Unit Only The 213 Masthead unit is an ocean-proven high performance wind sensor, providing raw wind speed and angle data to the instrument system. Features: Wind Speed and Angle measurement Pulse/Analogue output Compatible with models: H5000 and H3000 Rugged construction Fully field serviceable

G-Force Trolling Motor Handle & Cable w/Trolling Motor Clamp - Red Endorsed and proven by Gerald "G-Man" Swindle. The patented G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology. This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors. Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy! As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations. *NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS*  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force Trolling Motor Handle & Cable - Black Endorsed and proven by Gerald "G-Man" Swindle. The G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology. This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors. Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy! As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations. *NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS* WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force Trolling Motor Handle & Cable  - Red Endorsed and proven by Gerald "G-Man" Swindle. The G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology. This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors. Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy! As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations. *NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS*  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.