NavGrip XL Dash & Window Mount The NavGrip XL Dash & Window Mount is the perfect solution for mounting your large GPS or tablet when you're on the go.The sturdy, low-profile mount safely and securely holds your device in landscape or portrait mode for hands-free navigational use while driving. Desription: Universal design safely allows you to mount your 7" GPS or tablets up to 10" for front seat navigational use Heavy-duty, low vibration mount safely and securely holds your device while allowing full access to all device buttons and controls Mounts directly to most hard or textured surfaces, including your windshield Features: 360 Rotation Angle Adjustments Temporbond WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

HD Tablet Dock Portable Dash + Window Mount Features: Heavy Duty Tablet Block Portable Dash & Window Clamp Mount Heavy-duty, low vibration mount safely and securely holds your device from 8" to 10" Reinforced articulating arms with 360° rotation for easy angle adjustments Temporbond™ suction cup works on most smooth or textured surfaces WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

HD GPS Dock Portable Dash + Window Mount Features: Heavy Duty GPS Dock Portable Dash & Window Adapter Mount Heavy-duty, low vibration mount safely and securely holds your GPS with included adapter plate Reinforced articulating arms with 360° rotation for easy angle adjustments Temporbond™ suction cup works on most smooth or textured surfaces Includes Rand McNally and Garmin adapters WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Mobile Grip-iT Windshield Mount Kit 360° Rotating Head Convenient 22.8 cm length Adjustable wings open up to 4-1/2" Compatible with many of today's mobile electronics Easily transferable from vehicle to vehicle The Mobile Grip-iT Windshield Mount Kit is a combination of two great products rolled into one convenient package. Featuring the Satellite Radio Window Mount and the Mobile Grip-iT Universal Holder, this combination is ideal for easily installing portable electronics in just about any vehicle. The Satellite Radio Window Mount features a "Quick Lock & Release Lever" for easy installation or transferring to another vehicle. The solid design dampens movement and vibration from road shock, and is adjustable in any direction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Level Cup™ XL Low Profile Mount w/Large Strap Clamp Base Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup™ XL keeps your drink upright, regardless of the conditions. This kit includes a standard length socket arm and hose clamp base for handlebars, rails and roll bars for ATV's and UTV's. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.  Koozie included with purchase of this product.  Common Beverage Sizes: 12oz Cans Water Bottles Insulated Cups 32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask) Material: High Strength Composite and Marine Grade Aluminum   Ball Size: 1" Rubber Ball "B" Size   Note: The "U" in the part number reflects product packaged in poly bag Compatible Dimensions: Width Range: 2.6" - 3.5" Height Range: 3.75" - 11"

Micropump GJ-N25.PF1S.B Pump Head B Mount Micropump 81809 GJ Series Pumphead with Port/fittings 1/8-27 (F) NPT Side Ports, Max Speed 5500 RPM, Max Pressure 300 psi and Max Temp 77 (C). Micropump GJ-N25.PF1S.B Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81809 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS. Pump Series: GJ Series Ports/Fittings: 1/8-27 (F) NPT Side Ports Min Speed (RPM): 500 Max Speed (RPM): 5500 Max Pressure (psi): 300 Min Temperature (°C): -46 Max Temperature (°C): 77 Max Diff. Pressure (psi): 69.6774193548387 Displacement (ml/rev): 0.91 Design: Standard Design Gear Set: 0.500/2/24 (0.91ml/rev) Gear Material: PPS (carbon fiber/ptfe) Static Seals: PTFE Gasket (.004) 5369 Base Materials: 316SS Drive Mount: MP Plate Bypass: No Driven: Ferrite Driving Magnet: Not Included High System Pressure: No Bushings: PPS (carbon fiber/ptfe) Shafts: 316SS Gear Trim: None Part Number: 81809 Model: GJ-N25.PF1S.B

HD Magnetic Mount Features: Heavy Duty Phone Dock Portable Dash & Window Magnet Mount Magnet holder with adjustable support feet features a 25lb Rare Earth Magnet that securely holds your device, with or without a case Temporbond™ suction cup works on most smooth or textured surfaces Includes metal mounting plates that securely attach to device for strongest possible hold WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

QuikMagnet Ultra Dash Mount The QuikMagnet Ultra Dash Mount is the perfect solution to mount your smartphone in your vehicle, so you can safely use your smartphone while driving. The QuikMagnet Ultra Dash Mount utilizes our Temporbond_ technology which allows you to attach this magnetic smartphone mount to almost any dashboard without needing messy adhesives. The powerful magnets in the QuikMagnet Ultra Dash Mount make this device simple to use yet safe for your phone. We have even added a cord clip to hold your charging cable in place so it doesn't lay on your floorboards when you unplug your cable. The QuikMagnet Ultra Dash Mount is universal and will work with almost any smartphone, with or without a case. The patented design will even work seamlessly with the largest phones with bulky protective cases. Features: The QuikMagnet Ultra Dash Mount is the perfect place to put your Smartphone so you can use your GPS, navigation, music and communications apps while you are driving Don't like clutter on your dashboard? Use your QuikMagnet Ultra Dash Mount on your windshield instead Need a place to put your phone at night where you can see it? Use your QuikMagnet Ultra Dash Mount on your nightstand or even on your wall near your bed. The QuikMagnet Ultra Dash Mount is designed to securely hold your smartphone so you can use your technology safely in your car. The patented design makes it simple and safe for you and your device WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Universal Vehicle Laptop Mount Part #: LTM-MS-525 Product Description The Universal Vehicle Laptop Mount is a heavy duty in-vehicle computer laptop mount for the computer user on the go.Designed for the professional road warrior that needs a sturdy and flexible mounting system for their laptop computer.Our Bracketron laptop mount is made from heavy duty 30mm aluminum tubing and high strength alloy locking joints creating a solid and rugged mount for your laptop.The Bracketron system secures to the passengers side seat bolt utilizing a quick release fitting. The mount can be remove easily in seconds or just folded and locked in place on the floor, out of the way, and ready for use the next time it's needed.The quick release telescoping lower arm provides easy adjustment for height and position and also allows the deck to swing out of the way when not in use.Adjusting the computer angle is controlled easily with the professional Sure-Grip Pan-Head Deck with its convenient one hand locking control lever.The Bracketron system is great for traveling business people, police and fire departments, field service agents, courier and delivery fleets or anybody that needs a laptop computer in a motor vehicle. Quick Overview Mounts To Passengers Side Seat Bolt With Quick Lock And Release Lever Can Be Removed From Your Vehicle In Seconds Heavy Duty Locking Joints Adjust For The Best Viewing Angle Telescoping Lower Arm Extends from 13" to 21" Cushioned, Adjustable Pan-Head Sure-Grip Deck Holds Laptop Securely Works best with 10 " to 17" laptops Quick and Easy No Holes Mounting WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM® X-Grip® Large Phone Mount with Track Ball™ Base & Long Arm This RAM® Track Mount for large-size phones (RAM-HOL-UN10B-C-354-TRA1U) is made up of a B-size 1" ball molded to a high-strength composite base, a rubber friction washer, and a stainless steel T-bolt for sliding into any third-party track system, or the RAM® Tough-Track™ line of tracks. Simply insert or slide the Track Ball™ into your track and twist the ball clockwise to tighten it in place. Twist counterclockwise to loosen or adjust the ball. Included in this kit are a B-size long-length socket arm and a RAM® X-Grip® for large-size phones with or without a case. This track mount is ideal for mounting devices to the Jeep JL and Gladiator dashboard track mounts (RAM-DT-204-TRACK-A12U) and the new Ford Bronco dashboard track mount (RAM-DT-207-TRACK-EXA-29BU). Features: 1" B-size RAM® ball with adjustable T-bolt designed for track mounting systems, including the RAM® Tough-Track™ and other third-party track systems Features a rubber friction washer and a stainless steel T-bolt; simply insert it into your track and twist the ball clockwise to tighten Includes a B-size long-length socket arm and a large-size RAM® X-Grip® phone holder Spring-loaded X-Grip® holds large-size phones and includes an optional device tether for peace of mind during rugged use Backed by a lifetime warranty Specifications: Hardware Included: (1) Optional Tether & (1) Glue Tube for Rubber Caps Holder Dimensions (inch): Width Range: 1.75" - 4.5" / Depth Range: .875" max Socket to Socket Length (inch): 5.31" Ball Size (inch): B Size (1") Weight Capacity: Standard Use: 2 lbs. / Heavy-Duty Use: 1 lb. Materials: Marine-grade aluminum, high-strength composite, stainless steel Packaging Type: Poly Bag Weight: 0.84 lb. Compatible Devices: Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, and iPhone 14 Pro Max Blackberry: Evolve X Blackview: BV9900, BV9900 Pro Cat: S42, S62, S62 Pro Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, RV 770 LMT-S Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, Pixel 7 Pro HTC: Bolt, U Ultra Huawei: Mate 20 X Kyocera: DuraSport 5G LG: Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, X venture Magellan: TR5, TR7 Motorola: Moto e4 plus, moto g4, moto z2, moto z2 play, moto z3 Rand: McNally Road Explorer 5, McNally TND 540 Razer: Phone 2 Samsung:  Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, Galaxy S23 Ultra Sonim: RS60 Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, Xperia XZ Premium

Quick-Grip™ XL Phone Mount with Track Ball™ Base - Long This RAM® Track Mount for large-size phones (RAM-HOL-PD4-C-354-TRA1U) is made up of a B-size 1" ball molded to a high-strength composite base, a rubber friction washer, and a stainless steel T-bolt for sliding into any third-party track system or the RAM® Tough-Track™ line of tracks. Simply insert or slide the Track Ball™ into your track and twist the ball clockwise to tighten it in place. Twist counterclockwise to loosen or adjust the ball. Included in this kit are a B-size long-length socket arm and a RAM® Quick-Grip™ XL for large-size phones featuring adjustable side arms for a form-fitting, secure hold with or without a case. This track mount is ideal for mounting phones to the Jeep JL and Gladiator dashboard track mount (RAM-DT-204-TRACK-A12U) and the new Ford Bronco dashboard track mount (RAM-DT-207-TRACK-EXA-29BU). Features: 1" B-size RAM® ball with adjustable T-bolt designed for track mounting systems, including the RAM® Tough-Track™ and other third-party track systems Features a rubber friction washer and a stainless steel T-bolt; simply insert it into your track and twist the ball clockwise to tighten Includes a B-size long-length socket arm and RAM® Quick-Grip™ XL phone holder for larger-size phones Spring-loaded Quick-Grip® XL holds large-size phones and includes adjustable side supports that provide a secure fit for a variety of large phones and other devices; easily insert and remove your phone with one hand Backed by a lifetime warranty Specifications: Hardware Included: Assembly hardware Holder Dimensions (inch): Height Range: 5.75” 7.25" max (using optional supports) / Width Range: 2.625” – 3.625” / Max Depth: .72" T Bolt Dimensions: .48” x .95” Socket to Socket Length (inch): 5.31” Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb. Materials: Marine-grade aluminum and high-strength composite Weight: 0.97 lb. Compatible Devices: Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xr, iPhone Xs Max, iPhone 11, iPhone 11 Pro Max, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 14, iPhone 14 Plus, iPhone 14 Pro, and  iPhone 14 Pro Max Blackberry: DTEK 50, DTEK 60, Evolve X, and KEYone Blackview: BV9900 and BV9900 P Cat: S42, S62, and S62 Pro Google: Pixel XL, Pixel 2 XL, Pixel 3 XL, Pixel 3a, Pixel 3a XL, Pixel 4, Pixel 4 XL, Pixel 6, Pixel 6 Pro, Pixel 7, and Pixel 7 Pro HTC: Bolt, U Ultra, U11, and U11 life Huawei: Mate 20 Pro, Mate 20 X, and P30 Pro Kyocera: DuraSport 5G LG: Fiesta 2 LTE, Fiesta LTE, G5, G5 Silver, G6, G6+, G7 ThinQ, G8 ThinQ, G8S ThinQ, Grace LTE, Harmony, K20, K20 Plus, K20 V, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V30, V35 ThinQ, V40 ThinQ, V50 ThinQ, X charge, and X venture Motorola: moto e4 plus, moto g4, moto g5s plus, moto g6, moto g7 power, moto X4, moto z2, moto z2 play, and moto z3 Nokia: 5, 6, 8, 7 plus, and 9 PureView OnePlus: 6T, 7, 7T, 7T Pro, and 7 Pro Razer: Phone 2 Samsung: Galaxy A6, Galaxy A6+, Galaxy A7, Galaxy A7 (2016), Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A8 (2018), Galaxy A8+, Galaxy A8+ (2018), Galaxy A9 (2016), Galaxy A9 (2018), Galaxy A9 Pro (2016), Galaxy A10, Galaxy A10e, Galaxy A10s, Galaxy A11, Galaxy A20, Galaxy A20e, Galaxy A30, Galaxy A50, Galaxy A50s, Galaxy 70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy J5 (2017), Galaxy J7, Galaxy J7 (2016), Galaxy J7 (2017), Galaxy J7 (2018), Galaxy J7 Max, Galaxy J7 Perx, Galaxy J7 Prime, Galaxy J7 Prime 2, Galaxy J7 V, Galaxy Note 5, Galaxy Note 8, Galaxy Note 9, Galaxy Note 10, Galaxy Note 10 Plus, Galaxy Note Fan Edition, Galaxy On NXT, Galaxy On7, Galaxy On7 Prime, Galaxy On8, Galaxy S10, Galaxy S10 5G, Galaxy S10+, Galaxy S20, Galaxy S20+, Galaxy S20 Ultra 5G, Galaxy S22 5G, Galaxy S22+ 5G, Galaxy S22 Ultra, Galaxy S23, Galaxy S23+, Galaxy S23 Ultra, Galaxy S6 Active, Galaxy S6 Edge+, Galaxy S7 Active, Galaxy S7 Edge, Galaxy S8, Galaxy S8 Active, Galaxy S8+, Galaxy S9, Galaxy S9+, Galaxy XCover 4, Galaxy XCover 5, Galaxy Z Fold2, and Galaxy Z Fold3 Sony: Xperia C4, Xperia L1, Xperia L2, Xperia XA Ultra, Xperia XA1 Plus, Xperia XA1 Ultra, Xperia XA2 Ultra, Xperia XZ Premium, Xperia XZ1, Xperia XZ2, and Xperia XZ3 Xiaomi: Mi 9, Mi 9 Explorer, Mi Mix 2S, and Mi Mix 3 ZTE: Axon 10 Pro and Axon 9 Pro

X-Grip® Phone Mount with Track Ball™ Base - Long This RAM® Track Mount for standard-size phones (RAM-HOL-UN7B-C-354-TRA1U) is made up of a B-size 1" ball molded to a high-strength composite base, a rubber friction washer, and a stainless steel T-bolt for sliding into any third-party track system, or the RAM® Tough-Track™ line of tracks. Simply insert or slide the Track Ball™ into your track and twist the ball clockwise to tighten it in place. Twist counterclockwise to loosen or adjust the ball. Included in this kit are a B-size long-length socket arm and a RAM® X-Grip® for standard-size phones with or without a case. This track mount is ideal for mounting devices to the Jeep JL and Gladiator dashboard track mounts (RAM-DT-204-TRACK-A12U) and the new Ford Bronco dashboard track mount (RAM-DT-207-TRACK-EXA-29BU). Features: 1" B-size RAM® ball with adjustable T-bolt designed for track mounting systems, including the RAM® Tough-Track™ and other third-party track systems Features a rubber friction washer and a stainless steel T-bolt; simply insert it into your track and twist the ball clockwise to tighten Includes a B-size long-length socket arm and a standard-size RAM® X-Grip® phone holder Spring-loaded X-Grip® holds standard-size phones and includes an optional device tether for peace of mind during rugged use Backed by a lifetime warranty Specifications: Hardware Included: (1) Optional tether, and (1) glue tube for rubber caps Holder Dimensions (inch): Width range: 1.875" - 3.25" / Max depth: .875" T Bolt Dimensions: .48” x .95” Socket to Socket Length (inch): 5.31” Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb. Materials: Marine-grade aluminum and high-strength composite, stainless steel Weight: 0.82 lb. Compatible Devices: Apple: iPhone 6s, iPhone 7, iPhone 8, iPhone SE, iPhone X, iPhone Xs, iPhone Xr, iPhone 11, iPhone 11 Pro, iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 14, and iPhone 14 Pro Blackberry: DTEK 50, DTEK 60, and KEYone Garmin: Approach G8, Edge 1030, and Edge Explore 1000 Google: Pixel, Pixel XL, Pixel 2, Pixel 3, Pixel 3a, Pixel 4, Pixel 4 XL, Pixel 4a, Pixel 5, Pixel 6, Pixel 6 Pro, and Pixel 7 HTC: U11 and U11 life Huawei: Mate 20 Pro and P30 Pro LG: Aristo, Aristo 2, Exalt LTE, G5, G5 Silver, G6, G6+, G7 ThinQ, G8 ThinQ, Grace LTE, K20, K20 Plus, K20 V, K3, K3 2017, K8 2017, Phoenix 3, Q6, Rebel 2 LTE, Rebel 3 LTE, Risio 2, Tribute Dynasty, Tribute HD, V30, V35 ThinQ, V40 ThinQ, Wine LTE, and Zone 4 Motorola: moto e4, moto g5s plus, moto g6, moto g7 power, moto X2, moto X4, and razr Nokia: 1, 2, 3, 5, 6, 8, 9 PureView, 216, 230, 150 Dual SIM, 3310 Dual SIM, 7 plus, 8 Sirocco, and 8110 4G OnePlus: 6T, 7, 7T, 7T Pro, and 7 Pro Samsung: Galaxy A3, Galaxy A3 (2016), Galaxy A3 (2017), Galaxy A5, Galaxy A5 (2016), Galaxy A5 (2017), Galaxy A6, Galaxy A6+, Galaxy A7 (2016), Galaxy A8+, Galaxy A8 (2018), Galaxy A8+ (2018), Galaxy A10, Galaxy A10e, Galaxy A10s, Galaxy A11, Galaxy A20, Galaxy A20e, Galaxy A30, Galaxy A40, Galaxy A50, Galaxy A50s, Galaxy AMP 2, Galaxy AMP Prime, Galaxy AMP Prime 2, Galaxy C5, Galaxy E5, Galaxy Express 3, Galaxy Express Prime 2, Galaxy Grand Max, Galaxy J1, Galaxy J1 (2016), Galaxy J2, Galaxy J2 (2016), Galaxy J2 (2017), Galaxy J3 (2016), Galaxy J3 (2017) International, Galaxy J3 Emerge, Galaxy J3 Prime, Galaxy J3 V, Galaxy J5, Galaxy J5 (2016), Galaxy J5 (2017), Galaxy J7 (2016), Galaxy J7 (2017), Galaxy J7 Perx, Galaxy J7 Prime, Galaxy J7 Prime 2, Galaxy Luna, Galaxy Note 8, Galaxy Note Fan Edition, Galaxy Note 10, Galaxy Note20, Galaxy On NXT, Galaxy On5, Galaxy On7 Prime, Galaxy On8, Galaxy S5, Galaxy S5 Neo, Galaxy S6, Galaxy S6 Active, Galaxy S6 Edge, Galaxy S6 Edge+, Galaxy S7, Galaxy S7 Active, Galaxy S7 Edge, Galaxy S8+, Galaxy S9, Galaxy S9+, Galaxy S10, Galaxy S10+, Galaxy S10e, Galaxy S20, Galaxy S20+, Galaxy S20 FE 5G, Galaxy S20 Ultra 5G, Galaxy S22 5G, Galaxy S22+ 5G, Galaxy S23, Galaxy V Plus, Galaxy XCover 3, Galaxy XCover 4, Galaxy XCover 5, Galaxy Z Fold2, Galaxy Z Fold3, W2017, Z1, Z2, Z3, and Z4 Sony: Xperia L1, Xperia X, Xperia X Compact, Xperia X Performance, Xperia XA, Xperia XA1, Xperia XA1 Plus, Xperia XA2, Xperia XZ, Xperia XZ1, Xperia XZ1 Compact, Xperia XZ2, Xperia XZ2 Compact, Xperia XZ3, Xperia XZs, Xperia Z3, Xperia Z3+, Xperia Z5, Xperia Z5 Compact Xiaomi: Mi 9, Mi 9 Explorer, Mi Mix 2S, and Mi Mix 3 ZTE: Axon 9 Pro, Axon 10 Pro

PwrUp Qi Wireless Gravity Mount Keep the charge going, no matter where you are. The PwrUp Qi Gravity Mount offers a new way to charge your Qi-compliant smartphones. The 10w certified Qi charger will allow your phone to charge at the fastest speed possible. To use, just place your phone in the holder and squeeze the arms until the foot of the mount rests against your phone. This will ensure that you hit the sweet spot every time you place your phone in the holder. You can adjust the height of optimal viewing by sliding the device holder up/down or vertically/horizontally. The suction cup is made with our Temporbond material, which allows you to mount it to smooth or textured surfaces. If your mount ever becomes un-sticky, you can clean the suction cup with warm, soapy water and let it air dry. You can easily attach and remove the mount at any time and is transferrable between vehicles. There is an optional vent bracket with a stabilizer bar included, giving you multiple ways to mount your smartphone. Features: Certified by the Qi Consortium for all the latest Qi-enabled smartphones Patented Temporbond suction cup - allows you to attach smooth or textured surfaces Includes PwrUp Charging app download instructions for optimal charge performance, get updates on battery usage, and more! Includes a rotating vent clip, 10W car charger, cable, and one cord wrangler(cord not included) 1-year limited warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

IDMK S12R In-Dash Mounting Kit for SOLIX 12 In-dash unit mounting kit for the SOLIX 12 Series of products. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

IDMK S15R In-Dash Mounting Kit for SOLIX 15 In-dash unit mounting kit for the SOLIX 15 Series of products. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.