Universal Cup-iT with Grip-iT Part #: UCH-101-BL Product Description The Universal Cup-iT with Grip-iT easily installs into the vehicles cup holder providing a stable, secure and easily accessible mounting solution for your portable devices.Included is the Mobile Grip-iT Device Holder which features arms that open up to 3.75" and also adjust up or down, allowing you to custom configure it to your particular device and full access to all buttons and functions. Quick Overview Expands to fit varying size cupholders up to 3.75" Compatible with most MP3 players, all cellular phones, many GPS and satellite radios in today's mobile electronics market. Keeps mobile devices secure Grip-iT Holder features adjustable wings which open up to 4-1/2" Easy-to-install design allows mount to be moved from vehicle to vehicle with ease. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Suction Cup Twist Lock Base Mount w/X-Grip II Part #: RAM-B-166-UN8U Consists of the universal spring loaded X-Grip II? holder, socket system and 3.25" suction cup twist lock base. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. X-Grip II consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. It expands and contracts for perfect fit of most 7" tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip II. Compatible Devices: Amazon Kindle Archos 7 Asus EEE Pad Memo Barnes & Noble NOOKcolor BlackBerry PlayBook Dell Streak 7 HTC Flyer Samsung Galaxy Tab (7" version) Holder Dimensions: Minimum Width = 2.25" (Devices 2.25" in width must be a minimum of 7" in height to fit) Maximum Width = 5.75" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the holder for quick release of your tablet Material: High Strength Composite, Rubber Tips and Powder Coated Marine Grade Aluminum

Cup-iT XL Quick and easy cup holder mounting kit secures most portable devices. The Cup-iT XL sturdy flex shaft and 360° rotating capability adds more versatility for easier viewing and access with a secure base. Also included is the Grip-iT XL Mobile Device Holder that works with almost any portable device. Features: Grip-iT-XL arms adjust horizontally from 3.25" - 8.9" wide Side arms adjust up or down to allow easy access to device button or controls Mount fits devices over 7" in screen size Fits large cup holder sizes up to 3.75" in diameter One year warranty

RAM Twist Lock Suction Cup Mount w/Universal X-Grip Cell Phone Holder The RAM-B-166-UN7U consists of a 3.25" twist lock suction cup base, double socket system and universal spring loaded X-Grip holder for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible Devices (WITH OR WITHOUT CASE): Apple iPhone 6 Apple iPhone 5s Apple iPhone 5c Apple iPhone 5 Apple iPhone 4 Apple iPhone 4 Apple iPhone 3GS Apple iPhone 3G Apple iPhone Apple iPod touch (All Models) Apple iPod (G1-G5) Samsung GALAXY S4 Samsung GALAXY S5 The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Holder Dimensions: Minimum Width = 1.875" Maximum Width = 3.25" Depth = 0.875" Features: 1. Rustproof 2. High strength composite and stainless steel construction 3. Spring loaded holder expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable 5. Socket technology allows for multiple adjustment angles and articulation of device 6. Lifetime warranty 7. Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Twist-Lock™ Suction Cup Mount w/Universal X-Grip® Cradle for 10" Large Tablets The RAM-B-166-UN9U consists of a 3.3" diameter suction cup twist lock base, double socket arm, round base adapter and universal X-Grip® clamping cradle for 10" tablets. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip® clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip®. The X-Grip® cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Features: Spring loaded cradle expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the cradle for quick release of your tablet Multiple mounting access points on the back of the cradle Additional support keeper at the bottom of the cradle Full access to all ports Lifetime warranty Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

Twist-Lock™ Suction Cup Mount w/Universal X-Grip® Large Phone/Phablet Cradle The RAM-B-166-UN10U consists of a 3.3" diameter suction cup twist lock base, STANDARD length double socket arm and universal spring loaded X-Grip® cradle for large phones and phablets. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the mount to your optimum viewing position. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your phone or phablet. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 1.75" (Minimum Height = 5.5") Maximum Width = 4.5" (Minimum Height = 3.25") Depth = 0.875" Features: Rustproof High strength composite and stainless steel construction Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments Lifetime warranty Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.

RAM-A-CAN™ II Universal Cup Holder Base with Double Ball Mount The RAP-299-3-B-102U consists of a double socket arm, two diamond bases and RAM-A-CAN™ II cup holder base. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. The RAM-A-CAN™ II cup holder base serves as a mounting point for the diamond base. Compatible with any vehicle cup holder with an inside diameter range of 2.57" to 3.5". Specifications: Material: High Strength Composite Ball Size: B Size 1" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag

Double Twist-Lock™ Suction Cup Mount w/Tab-Tite™ Universal Spring Loaded Cradle f/Apple iPad 1-4 with or without Light Duty Case The RAM-B-189-TAB3U consists of a double 3.3" twist lock suction cup base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded Tab-Tite™ cradle makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 8.5" to 11.125" Width: 6.38" to 7.75" Depth: 0.13" to 0.56" Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty 8. Made in the U.S.A. Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.8 lbs.

Universal Grab Handle w/Comfort Grip - Black Flexible grab handle for flush, flexible mounting. Can be mounted to a variety of irregular surfaces and angles on swim platform, in the cockpit and companionway. Constructed from soft polypropylene webbing over a semi-rigid core. Because of the soft, pliable webbing in these handles and the absence of any sharp edges, they are safe in areas where occupants might come in contact with them. They meet the ABYC H-41 standard for strength: "withstand a load of 400lbs in any direction." All materials are non-corrosive, UV stable and mildew-resistant. Four holes for required #12 fasteners.

Level Cup™ XL w/Single Socket for B Size 1" Ball Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup™ XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL that has an integrated single-socket arm. This cup holder can attach to any B-size base or RAM® Mounts B-size ball accessory. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.  Koozie included with purchase of this product.  Common Beverage Sizes: 12oz Cans Water Bottles Insulated Cups 32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask) Material: High Strength Composite   Ball Size: 1" Rubber Ball "B" Size   Note: The "U" in the part number reflects product packaged in poly bag Compatible Dimensions: Width Range: 2.6" - 3.5" Height Range: 3.75" - 11"

Level Cup™ XL w/B Size 1" Ball Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup™ XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL with a B-size RAM® Mounts ball directly attached. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.  Koozie included with purchase of this product.  Common Beverage Sizes: 12oz Cans Water Bottles Insulated Cups 32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask) Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size    Note: The "U" in the part number reflects product packaged in poly bag Compatible Dimensions: Width Range: 2.6" - 3.5" Height Range: 3.75" - 11"

RAM Suction Cup Mount w/iPad mini EZ-ROLL'R Cradle The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The EZ-ROLL'R cradle is compatible with the following tablets: Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE Specifications: Docking Cradle: No Locking Cradle: No Fits Tablets WITH Cases: No Fits Tablets WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Lifetime warranty Material: High Strength Composite Suction Cup Mount Features: Double socket arm, 3.25" suction cup twist lock base and round base adapter that contains the universal AMPs hole pattern. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks.

Level Cup™ XL w/Long Double Socket Arm Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup XL keeps your drink upright, regardless of the conditions. This kit includes a long arm that can accommodate any B-size mounting base. This gives you the flexibility to put your cup anywhere you need it. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.  Koozie included with purchase of this product.  Common Beverage Sizes: 12oz Cans Water Bottles Insulated Cups 32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask) Material: High Strength Composite   Ball Size: 1" Rubber Ball "B" Size   Note: The "U" in the part number reflects product packaged in poly bag Compatible Dimensions: Width Range: 2.6" - 3.5" Height Range: 3.75" - 11"

RAM Drink Cup Holder w/ Goldwing Part #: RAM-B-132-309U Drink Cup Mount Description: A favorite world wide, the RAM Self Leveling Drink Cup holder will bring a smile to anyone's face when they get it. The perfect accessory for any vehicle including motorcycles, ATV's, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride. Motorcycle Brake/Clutch Reservoir Mount Description: Simply attach the RAM ball base to the brake/clutch handlebar control bracket and the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your electronic device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. The base fits the control clamps on your motorcycle with either standard or metric thread stainless steel bolts, provided in the kit Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

RAM-A-CAN™ II Universal Cup Holder Base The RAP-299-3U serves as a mounting point for RAM 1" double socket ball mounts. Included are support fins that flex, making the cup holder base conform to most vehicle cup holders. Also included is hardware to attach a RAM diamond base to the cup holder base. Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.