|
8065 8/5/3 Position Label Backlight System
Features:
Easily installed in Blue Sea Systems circuit breaker panels
Connects to 12 or 24 Volt sources via two 6" 18 AWG wire leads
Backlighting is standard on panels - No kit required
Reverse polarity protection built-in
Snaps apart for 5 or 3 positions
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.40 |
|
|
8383
Label Backlight System
Positions - 13
Easily installed in Blue Sea Systems circuit breaker panels
Connects to 12 or 24 Volt sources via two 6" 18 AWG wire leads
Backlighting is standard on panels - No kit required
Reverse polarity protection built-in
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.55 |
|
|
8384
Label Backlight System
Positions - 4 Positions
Easily installed in Blue Sea Systems circuit breaker panels
Connects to 12 or 24 Volt sources via two 6" 18 AWG wire leads
Backlighting is standard on panels - No kit required
Reverse polarity protection built-in
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.59 |
|
|
8054 Slate Grey - 3 Position - Vertical
Features:
Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions
Designed for flybridge and open cockpit applications
ON-OFF Contura Switches
ON indicating LEDs embedded in switches
Watertight mounting gasket included
Countersunk mounting holes throughout
Two-part polyurethane slate gray finish
Industry standard height and width
Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion
Completely wired and ready to install
Specifications:
Weatherproof: Water Resistant
Positions: 3
Nominal Voltage: 12v / 24v DC
Panel Cumulative Rating: 45A
Switch Rating: 20A @ 12v DC / 15A @ 24v DC
Height: 3.75"
Width: 5.25"
Depth: 3"
Included:
(3) 5021 Panel Mount AGC/MDL Fuse Holder
(1) 8030 Basic DC Panel Label Set - 30 Labels
(3) 8230 Contura Switch SPST Gray - OFF-ON
*NOTE: Waterproof panel labels are not backlit
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
93.38 |
|
|
8043 AC Main +3 Positions Toggle Circuit Breaker Panel - White Switches
Features:
Red reverse polarity indicating LED
All hot, neutral and safety ground buses installed, fully pre-wired
All circuit label positions are backlit on standard panels - No kit required
"ON" indicating LEDs installed in all circuit positions
Specifications:
Positions: 3
Nominal Voltage: 120v AC
Height: 7.5"
Width: 5.25"
Included:
(1) 8031 Basic AC Panel Label Set - 30 Labels
(4) 8034 LED - 120v AC Green
(1) 8066 LED - 120v AC Red
(3) 7210 A-Series White Toggle Circuit Breaker - Single Pole 15A (Branch)
(1) 7238 A-Series White Toggle Circuit Breaker - Double Pole 30A (Main)
(1) 9353 AC Voltmeter - 0 to 150v AC (Meter)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
281.88 |
|
|
Main + 3 Positions
(1) 30A Double Pole Circuit Breaker
(3) 15A Single Pole Circuit Breaker
(1) 8247 AC Digital Multimeter w/ Alarm
Red reverse polarity indicating LED
All hot, neutral and safety ground buses installed, fully pre-wired
All circuit label positions are backlit on standard panels - No kit required
"ON" indicating LEDs installed in all circuit positions
Maximum panel amperage - 50 Amperes
MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
Two-part polyurethane slate gray finish
Heavy 1/8" aluminum 5052 alloy
Industry standard height and width
Countersunk mounting holes throughout
Detailed installation instructions and cutout template included
Includes set of 30 common Large Format Labels
Over 500 individual Labels available
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
492.65 |
|
|
AC Main + 3 Positions
Description: Main + 3 Positions
30A Double Pole Installed: 1
15A Single Pole Installed: 3
Red reverse polarity indicating LED
All hot, neutral, and safety ground buses installed, fully pre-wired
All circuit label positions are backlit on standard panels - No kit required
"ON" indicating LEDs installed in all circuit positions
Maximum panel amperage - 50 Amperes
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
386.56 |
|
|
8069
Label Backlight System
Positions - 10
Easily installed in Blue Sea Systems circuit breaker panels
Connects to 12 or 24 Volt sources via two 6" 18 AWG wire leads
Backlighting is standard on panels - No kit required
Reverse polarity protection built-in
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.55 |
|
|
8 Position Panel
Designed for C-Series Circuit Breakers
Heavy 1/8" aluminum 5052 Alloy
Two-part polyurethane slate gray finish
Accepts standard Blue Sea Systems' backlight labels
Accepts standard Blue Sea Systems' "ON" indication LEDs
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
71.62 |
|
|
1496 - 360 Panel - 12 Position 12V Flat Rocker M2 Multimeter with SOC
Part of the Blue Sea Systems Battery Management Panels. This DC Branch Circuit Breaker panel will distribute current from a high amperage source to lower amperage circuits.
Features:
ON-indicating LEDs
Backlit label positions
Technical Specifications:
Positions - 12
Meter - M2 Multimeter w/SOC
Nominal Voltage - 12/24V DC
Maximum Amperage - 100A
Circuit Breaker Type - 12 A-Series (15A)
Dimensions - (H x W x D) - 7.75" x 9.25"" x 4" (197 x 235 x 102mm)
In the Box:
1496 Panel
Instruction Manual
*Sold as an Individual
|
776.59 |
|
|
8084 AC Main +6 Positions/DC Main +15 Positions Toggle Circuit Breaker Panel - White Switches
Features:
Includes set of 30 common AC and 30 common DC labels
All AC and DC buses installed, fully pre-wired
Label backlighting pre-installed
All LEDs installed
Maximum panel Amperage: 100 Amperes DC / 50 Amperes AC
AC Features:
Red reverse polarity indicating LED
Ready for installation of optional 4029 AC Isolation Cover
9353, 0-150 Volt AC Voltmeter
DC Features:
100 Amp C-Series circuit breaker provides main circuit protection and switching for DC branch circuits
8003, 8-16 Volt DC Voltmeter
8017, 0-100 Amp DC Ammeter
Owner upgradeable to 24 Volts with 8240, 18-32 Volt DC Voltmeter
Specifications:
AC Positions: Main +6
DC Positions: Main +15
120 Volts AC
12 Volts DC
(1) 30A - (3) 15A AC Circuit Breakers
(1) 100A - (9) 15A DC Circuit Breakers
*Combined AC/DC panels require a AC Insulating Cover to meet ABYC Standards
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
915.92 |
|
|
AC Main +4 Positions
PN: 8099
White Switches
Features
Red reverse polarity indicating LED
All hot, neutral and safety ground buses installed, fully pre-wired
Label backlighting pre-installed
All LEDs installed
Maximum panel Amperage - 50 Amperes
(1) 30A Double Pole Circuit Breaker
(4) 15A Single Pole Circuit Breaker
120 Volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
273.04 |
|
|
AC Main + 6 Positions / DC Main + 18 Positions
Installed AC Breakers
(1) 30A
(3) 15A
(1) 8247 AC Digital Multimeter w/ Alarm
Installed DC Breakers
(1) 100A Main
(12) 15A
(1) 8248 DC Digital Multimeter w/ Alarm
120V AC
12/24V DC
All AC and DC buses installed and fully pre-wired
Label backlighting pre-installed
ON - indicating LEDs installed in all circuit positions
100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch
Maximum panel amperage - 100 Amperes AC, 50 Amperes DCMIL-C5541C or equivalent immersion undercoating for lifetime corrosion resistance
Two-part polyurethane slate gray finish
Heavy 1/8" aluminum 5052 alloy
Detailed installation instructions and cutout template included
Countersunk mounting holes throughout
Includes set of 60 common AC and DC Large Format Labels
Over 500 individual labels available
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1341.34 |
|
|
1495 - 360 Panel - 4 Position 12V with Dual USB & 12V Socket
Part of the Blue Sea Systems Battery Management Panels. This DC Branch Circuit Breaker panel will distribute current from a high amperage source to lower amperage circuits.
DC sockets and USB charging are integrated into a popular sized circuit protection panel.
Features:
ON-indicating LEDs
Backlit label positions
Technical Specifications:
Positions - Four (4)
Nominal Voltage - 12V DC
Maximum Amperage - 100A
Circuit Breaker Type - 4 A-Series (15A)
USB Output - 12/24V Dual USB
Socket Output - 12V Dash socket
Dimensions - (H x W x D) - 7.75" x 4.88" x 3.5" (197 x 124 x 89mm)
In the Box:
1495 Panel
Instruction Manual
*Sold as an Individual
|
235.98 |
|
|
AC Main + 6 Positions / DC Main + 18 Positions
Switches Color: White
Installed AC Breakers
(1) 16A
(3) 8A
Installed DC Breakers
(1) 100A Main
(12) 15A
Voltage 230v - 12/24V DC
All AC and DC buses installed and fully pre-wired
Label backlighting pre-installed
ON - indicating LEDs installed in all circuit positions
100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch
Maximum panel amperage - 100 Amperes AC, 50 Amperes DC
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1341.34 |
|