|
Ampco Pumps AC+218-28TC 2X1-1/2 316SS Fluid End
|
3222.99 |
|
|
Ampco ICPLUS214-180TC, 2" X 1.5" 316SS Fluid End Only
The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.
Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.
The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.
Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.
The standard connection type is NPT (National Pipe Thread) or flange fittings.
|
1668.60 |
|
|
Ampco ICPLUS216-250TC, 2" X 1.5" 316SS Fluid End Only
The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.
Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.
The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.
Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.
The standard connection type is NPT (National Pipe Thread) or flange fittings.
|
2364.98 |
|
|
Ampco ICPLUS218-280TC, 2" X 1.5" 316SS Fluid End Only
The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.
Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.
The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.
Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.
The standard connection type is NPT (National Pipe Thread) or flange fittings.
|
3222.99 |
|
|
Ampco ICPLUS316-250TC, 2.5" X 1.5" 316SS Fluid End Only
The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.
Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.
The standard connection type is NPT (National Pipe Thread) or flange fittings.
Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.
The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.
|
2364.98 |
|
|
Ampco Pumps GS8101150 CB114 Seal Kit
Material: Viton
Product: Replacement Kit
Series: CB+ Craft Brew Pump Series
Model: CB+ 114/214
|
263.25 |
|
|
Ampco Ac216Md56C-S, Kit C216 2X1 1/2 56C Dseal
|
1859.76 |
|
|
Little Giant Sub. Pump 518200
Little Giant PE-1 Submersible Pump
Motor 115 Volt 60 Hz 1/125 HP Epoxy Encapsulated Oil-Less Direct Drive Motor, 170 GPH at 1 Foot Head, Shutoff Head 7 Feet, Inlet: Smooth Volute with Snap Off Screen, Outlet: 1/4" MNPT or 1/2" Tubing, Fluid Temperature Up to 120F (49C), UL/CSA Listed, 6 Foot Power Cord
518200 Small submersible, epoxy-encapsulated pump for commercial, industrial, and home use. Applications include statuary fountains, water displays, air conditioners, machine tools, and many other applications where liquid must be transferred or recirculated.
Not recommended for fuel oil transfer, aquariums, and swimming pools.
|
127.92 |
|
|
Cat Pumps Crankcase Oil 2.5 Gallons
Cat Pumps custom blend crankcase oil is exclusively designed, tested and proven to maximize the life of your Cat Pump. This special formulated premium-grade, petroleum-based, ISO 68 hydraulic oil contains the most advanced additive package to protect against wear, oxidation, rust and corrosion. Model 6105-2.5 contains 1 2.5 gallon container.
|
101.83 |
|
|
Micropump GA-T23.J9FS.A Pump Head A Mount
The GA Series high-performance pumps provide precise and pulseless flows. Featuring Micropump's suction-shoe design, GA Series pumps self-compensate for wear, ensuring near zero slip and a longer pump life. Pumps are available in a wide range of materials and configurations.
Feature:
Small Size
Smooth, Pulseless Delivery
Chemically Resistant
Easy to Service
Proven Reliability
Advanced Pump Technology
Wide Range of Options
OEM Configurations
Enhanced Efficiency
Pump Series: GA Series
Ports/Fittings: 1/8-27 (F) NPT Side Ports
Min Speed (RPM): 500
Max Speed (RPM): 5500
Max Pressure (psi): 300
Min Temperature (°C): -46
Max Temperature (°C): 177
Max Diff. Pressure (psi): 75
Displacement (ml/rev): 0.092
Design: Standard Design
Gear Set: 0.125/2/40 (0.092 ml/rev)
Gear Material: PEEK (hex drive)
Static Seals: PTFE
Base Materials: 316SS
Drive Mount: MP Housing
Bypass: No
Driven: Ferrite
Driving Magnet: Not Included
High System Pressure: No
Bushings: None
Shafts: 316SS
Gear TrimNone
Model: GA-T23.J9FS.A
|
1147.03 |
|
|
FINISH THOMPSON AC5STS3V478B015C 2X1 1/2 SS PUMP 56C VITON
Applications
Chemical processing
Printed circuit boards
Pharmaceutical
Waste water treatment
Port Sizes
(Suction x Discharge) &
Connection Types:
1.5 in x 1.25 in NPT or BSP
1.25 in x 0.75 in NPT or BSP
2 in x 1.5 in NPT or BSP
1.25 in x 0.75 in ANSI 150# Flanges
1.5 in x 1 in ANSI 150# Flanges
1.5 in x 1.5 in ANSI 150# Flanges
2 in x 1.5 in ANSI 150# Flanges
1.5 in x 1 in Electropolished Tri-clamps
1.5 in x 1.5 in Electropolished Tri-clamps
2 in x 1.5 in Electropolished Tri-clamps
Maximum Specific Gravity:
up to 1.8
Maximum Working Pressure:
100 psi (6.9 bar)
@3450 RPM
@2900 RPM
Flow Range*:
5 to 145 gpm
1.14 to 26.3 m3/h
Maximum Head:
88.5 ft
19 m
Power Range**:
0.5 to 3.1 hp
0.21 to 1 kW
*See Performance tab for individual impeller diameter capability
**Smallest to largest impeller on 1.0 s.g.
Type:
Stainless Steel Mechanically Sealed
Configuration:
Horizontal
Construction Materials:
316 Stainless Steel
O-ring Materials:
FKM, EPDM, Buna, or PTFE Encapsulated Silicone
Seal Type:
Bellows Type 21
Seal Materials:
Carbon, Ceramic, FKM, EPDM, SiC, Buna, or Kalrez®
Maximum Temperature:
300º F (149º C)
|
836.16 |
|
|
Oberdorfer 109MB Series Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
Inlet: 1 1/4" NPT
Outlet: 1" NPT
Flow:
80 GPM Max
Pressure:
to 19 PSI, 45 feet of head
Impeller:
Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft:
416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor / Drive:
Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
109MB-1-J26 is Oberdorfer- Centrifugal Pump 1/2HP ODP 115/230V Monel Shaft
|
1766.23 |
|
|
March TE-5C-MD Mag Drive Pump 115V
Applications for the TE-5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, small scrubbers, detergent mixers, computer cooling, carbon arc furnace cooling, and marine air conditioners.
March Pump's industrial TE-5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 17 gallons per minute at 4 feet, and its maximum head is 29 Feet (or around 12PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.5 male pipe thread. The standard motor is a 1 Phase 115/230V 0.2 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
18 GPM
60.5 LPM
Max Head
29 FT
6.3 M
Power
.2 HP
.149 KW
Electrical
1PH 115/230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1"FPT
Outlet
1/2"MPT
Wet End
Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)
Motor Options
Available in Explosion Proof
|
588.75 |
|
|
Ampco Pumps C218/328-DG-BUNA Seal Kit Dg Buna - 218/328
|
401.31 |
|
|
Ampco Pumps C218/328-DG-EPDM Seal Kit Dg Epdm - 218/328
|
457.47 |
|