AMT Pump 1657-000-90 282E Package Impeller Shims

AMT Pump 4822-95 Rotary Hand Pump AMT Rotary Drum Pump 1" Suction & 3/4" Discharge Buna-N Shaft Seal Includes: Bung Adapter & Suction Tube Included Material: Cast Iron

AMT Pump 4S13X PPO Alum Trash Pump Gorman-Rupp Pump Kit, Less Engine Trash Pump 540 GPM 4" Ports Handles up to 2" Solids IPT by Gorman-Rupp 4 inch professional grade self priming trash pump that can move 32,400 gallons of dirty water in one hour  

Jabsco 17438-0001 Pump Head For Use With 17430-0001 Self-Priming Pump With Neoprene Impeller

Jabsco 90023-0001 for 2760 Pump Replacement Part For Model Pump 2760

AMT Pump 4861-97 Brz Centrifugal Pump 12V 1/8 HP, Totally Enclosed, Not Ventilated, 12 volt DC electric motor Salt water resistant Naval Bronze construction Semi-open, self-cleaning impeller that can handle solids to 3/16 inch diameter Buna-N mechanical seal and O-ring The AMT 4861-97 is a lightweight 12 volt pump that is designed for use in live tanks, chemical transfer, salt water and general dewatering applications.     Features durable bronze construction with 3/4 inch NPT input and output ports.  Pump is NOT self-priming and requires flooded suction. 

AMT Pump 4821-95 Rotary Hand Pump Cast Iron Heavy-duty Cast Iron body with Buna-N seal 5 GPM @70 RPM (11 oz./stroke) Carbon vanes 0.75" suction x 1" discharge ports 0.75-Inch NPT steel discharge spout assembly (included) 1-Inch NPT x 40-Inch steel suction tube assembly (included) 2-Inch Cast Iron Bung adapter Maximum Temperature 160F Self-Priming Capable of handling compatible fluids with a maximum of 5,000 SSU viscosity at a minimum of 70 degrees F liquid temperature (roughly equivalent to SAE 40 motor oil) Liquids must be free of debris and solids for proper operation

AMT Pump 2P7XZR Hatz Diesel Fire Pump 2" Engine Driven Portable High Pressure pump is cast aluminum construction with cast iron volute and male NPT ports. Pump applications include fire protection and irrigation. These pumps are available with a wide choice of standard and heavy duty gasoline or diesel fueled engines. These pumps feature high efficiency closed cast aluminum impeller. All models come equipped with EPDM/EPR elastomers and seals. Most models include a heavy duty steel roll frame.   Features Removable/Replaceable Cast Iron Suction & Discharge Flanges Discharge Port Rotates in 90 Increments One Tool Serviceability, Tool Included with Engine Driven Models (Not with Kits) Includes Strainer and Rubber Foot Mounting Maximum Temperature 180 F Specifications Type: High Pressure Pumps Series: 2" Engine Driven Portable High Pressure Pumps Driver: Hatz Diesel 1B30 Seal Type & Elastomer/Faces: EPDM/EPR/CAR/CER Tank Size (Gal/Ltr): 1.32 / 5.0 Run Time (Hr.): 2.7 Mounting: Roll Cage HP: 5 HP SUCTION: 2" NPT DISCHARGE: 2" NPT L 31" X W 22.5" X H 23.6" Warranty: 1 Year   Product images are a representation only

Jabsco 18685-0000 115V Vane Pump 1/8Hp Tenv FEATURES Pump Body: Bronze Port Size: 1/2 (13mm) NPT Female. 1" (25mm) Hose Barb. Flow: 7.8 GPM Rotor: Vectra Vanes: Ryton Shaft Seal: Lip Type, Nitrile Shaft: Stainless Steel Motor: 1/8hp - 115V AC, 60Hz TENV, 3450 RPM Protection: Thermal Overload Cord: 6' Cord with 3 Prong Grounded Plug     APPLICATIONS / CHARACTERISTICS The Jabsco rotary vane pump is ideal for pumping light oil or transferring diesel fuel. The rotor and vanes are not affected by petroleum products. It is dry, self-priming with a suction lift of up to five feet and can pump against a discharge head of up to twenty feet. The motor is rated for continuous duty in applications with a total system head no greater than twenty feet and when pumping liquids with a similar viscosity to diesel fuel. When pumping light oils, the duty cycle should be no longer than thirty minutes.     Jabsco Sliding Vane Utility/Diesel Pump 115V 7.8GPM, 1/2"FNPT and 1" Hose Ports, AC Voltage  

AMT 3682-95 Straight Centrifugal Pedestal Pump Mechanical Seal: Buna-N Maximum Temperature: 180° F 3/4 in. NPT Suction Ports 1/2 in. NPT Discharge Ports Maximum Working Pressure: 75 PSI Self-cleaning Impeller on General Service Models Maximum Flow 35 GPM Maximum Head 148 Ft. Epoxy Coated Pedestal Drive and Discharge Port Rotates in 90° Increments on High Head Models   All pumps have Cast Iron Casing with Stainless Steel Impeller   AMT Straight Centrifugal Pedestal pumps are designed for continuous-duty OEM, Industrial/Commercial and processing applications including circulation, chemical processing, liquid transfer, heating and cooling. The high head models are ideal for sprinkler systems and pressure boosting. Pull-from-the-rear design permits easy servicing without disturbing any piping. Pedestals feature CNC machined shafts with sealed ball bearings. AMT Straight Centrifugal Pedestal pumps are reliable, cost effective and low maintenance. For use with nonflammable liquids compatible with pump component materials.

Amt 1506-000-00, Cast Iron Foot 10GX

AMT 1509-000-09, SHAFT & BEARING ASSY 1070 STEEL

Amt 1737-000-00 Clamp Screw  

Amt 2132-000-00 Diaphragm For 335E-96 3"Pmp  

Amt 3693-013-09 Impeller For Am 3693-95/97