|
Power Supply 110AC to 24DC/40A
The PWS1000 Series of power supplies provides 12, 24 or 48 Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt AC source.
Analytic Systems’ power supplies use Switchmode technology with powerful IGBT switching transistors for reliability and efficiency with minimum size. Circuit innovations reduce output ripple to levels previously available only from bulky and inefficient linear power supplies. Reliability features include an input fuse, thermal shutdown, current limiting and output short circuit protection with automatic recovery. An Output Over voltage Crowbar circuit protects any powered devices from excessive voltage in the event of a failure of the unit.
The newly updated single-board PWS1000 is ultra-quiet and features the latest generation of current mode PWM control. Extra features include adjustable output voltage audible and visual indicators for low input voltage, low output voltage, over temperature, overload and output on. Either 110 or 220 VAC input (Field Convertible) is available. The PWS1000 also features a four contact output terminal (two positive and two negative contacts) for easy connection of devices to the supply.
Features:
Power sensitive electronics without interference
Rugged and reliable to ensure years of safe and trouble free operation
Adjustable output voltage
Extremely rugged and well suited for marine and other demanding environments
Ultra-quiet low EMI operation
Audible & visual indicators for output overload, low input voltage, low output voltage & over-temperature
Over-temperature shutdown
Current limiting
Short circuit protection
Output overvoltage crowbar
Dry contact output fail relay
Remote control option
Digital Volt/Ammeter option
Custom output voltages available (8V to 55V)
19” Rackmount Available
Parallel output diodes available
Three year parts and labour warranty
|
1182.77 |
|
|
Power Supply 110AC to 12DC/70A
The PWS1000 Series of power supplies provides 12, 24 or 48 Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt AC source.
Analytic Systems’ power supplies use Switchmode technology with powerful IGBT switching transistors for reliability and efficiency with minimum size. Circuit innovations reduce output ripple to levels previously available only from bulky and inefficient linear power supplies. Reliability features include an input fuse, thermal shutdown, current limiting and output short circuit protection with automatic recovery. An Output Over voltage Crowbar circuit protects any powered devices from excessive voltage in the event of a failure of the unit.
The newly updated single-board PWS1000 is ultra-quiet and features the latest generation of current mode PWM control. Extra features include adjustable output voltage audible and visual indicators for low input voltage, low output voltage, over temperature, overload and output on. Either 110 or 220 VAC input (Field Convertible) is available. The PWS1000 also features a four contact output terminal (two positive and two negative contacts) for easy connection of devices to the supply.
Features:
Power sensitive electronics without interference
Rugged and reliable to ensure years of safe and trouble free operation
Adjustable output voltage
Extremely rugged and well suited for marine and other demanding environments
Ultra-quiet low EMI operation
Audible & visual indicators for output overload, low input voltage, low output voltage & over-temperature
Over-temperature shutdown
Current limiting
Short circuit protection
Output overvoltage crowbar
Dry contact output fail relay
Remote control option
Digital Volt/Ammeter option
Custom output voltages available (8V to 55V)
19” Rackmount Available
Parallel output diodes available
Three year parts and labour warranty
|
1182.77 |
|
|
RAM Laptop Power Supply Caddy
This RAM Power Caddy allows for power supply storage to be contained alongside your laptop. Keep your laptop charged and also run additional peripherals like printers, fax machines, etc. all with your own factory supplied power supply or combinations of most aftermarket AC inverters, DC power supplies and or AC/DC power adapters.
Material:
High Strength Composite
Specifications:
Width: 8.1875"
Height: 3.0625"
External Depth: 1.6875"
Internal Depth: 1.4375"
Weight: 0.30 lbs.
Note:
The "U" in the part number reflects product packaged in poly bag.
|
12.46 |
|
|
SEC-1223 Power Supply
This high-efficiency UL-60950-1 approved AC-DC power converter provides a highly regulated output DC voltage of 13.8 Volts at 23 Amps with an AC input of 120 Volts, 60 Hz. These advanced switch-mode DC power supplies were designed specifically for land mobile radio (LMR) applications. The power supplies produce clean reliable power and are highly filtered to suppress RFI. The unit comes with a detachable power supply cord with NEMA 5-15P plug. Features include over-current, short-circuit, and over-voltage protection. The AC-DC switching power supply conforms to FCC Part 15(B), class B digital device.
Features:
Advanced switch-mode technology
Reliable power with minimum weight and size
Circuit innovations minimize output voltage ripple and RFI
Input voltage can be set at 120VAC or 240VAC (internal jumper)
UL listed to both USA & Canadian safety standards
Specifications:
Input: 100-130 VAC
Output: 13.8 VDC
Amps: 23 Amps
Fuse: 6.3 Amps
Weight: 3.5 (lbs)/1.6 (kg)
Dimensions: 7.28 x 8.19 x 2.40 (in)/18.5 x 20.8 x 6.1 (cm)
Safety: UL, FCC
Applications:
Two way radio base stations
Communications systems
Security systems
Test equipment
Plotters
GPS receivers
Automotive & Marine displays
DC computers
12 Volt lighting systems
OEM applications
|
144.13 |
|
|
Power Unit - 42026 G
Grants the power supply up to 4 modules with the input combination of up to 2 batteries, 12 and 24V.Required for all Power A Mark II installations.
IP protection: IP65
Dim.: 205mm x 110mm (8" x 4.3")
|
293.35 |
|
|
PSU017
The PSU017 is an external power supply designed to work with the DRS2D and DRS4D Dome Radar Sensors when interfaced with and NavNet TZtouch MFD.
Standard Features:
Power supply for DRS2D and DRS4D Dome Radar Sensors
Includes a pre-connected 3M power cable to connect directly to ship's main
12VDC or 24VDC input voltage and 48VDC DRS output voltage
Cast Aluminum Housing
Legendary Furuno power supply performance and reliability
Dimensions: 9" h x 7.5" w x 3" d Weight with cable: 5lbs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
534.82 |
|
|
Desktop Switching Power Supply - 120VAC Input, 12V Output, 10 Amp
This high efficiency UL-60950-1 approved AC-DC power converter provides a highly regulated output DC voltage of 13.8 Volts at 10 Amps with an AC input of 120 Volts, 60 Hz (230 Volts, 50 Hz model also available). These advanced switch-mode DC power supplies were designed specifically for use with land mobile radio. The power supplies produce clean reliable power and are highly filtered to suppress RFI. The unit comes with a detachable power supply cord with NEMA 5-15P plug. Features include over-current, short-circuit and over-voltage protection. The AC-DC power supply conforms to FCC Part 15(B), class B digital device.
Features:
Advanced switch-mode technology
Reliable power with minimum weight and size
Circuit innovations minimize output voltage ripple and RFI
Input voltage can be set at 120VAC or 240VAC (internal jumper)
UL listed to both USA & Canadian safety standards
Specifications:
Input: 100-130 VAC
Output: 13.8 VDC
Amps: 10 Amps
Fuse: 3 Amps
Weight: 3.4 (lbs)
Weight: 1.54 (kg)
Dimensions: 8.19 x 7.28 x 2.4 (in)
Dimensions: 20.8 x 18.5 x 6.1 (cm)
Safety: UL, FCC
Warranty: 3 Year Limited
Applications:
Two way radio base stations
Communications systems
Security systems
Test equipment
Plotters
GPS receivers
Automotive & Marine displays
DC computers
12 Volt lighting systems
OEM applications
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
121.91 |
|
|
Hot air rises and cold air falls. You want to keep that cold air in the refrigerator. Most boat refrigerators are built with a drain in the bottom so any condensation that may form can drain into the bilge. If water can drain out of your refrigerator, so can the cold air drain out, and the warmer air from the bilge rises and enters the refrigerator.
The easiest way to solve this problem is to stick a rubber stopper or a wine cork in the drain hole to stop the air flow.
A refrigerator compressor and coils needs fresh air to work efficiently. A refrigeration unit works by removing the heat inside the refrigerator box. The heat is removed by the refrigerant and it dissipates into the air around the compressor coils. The less fresh air around the compressor and coils, the harder the compressor has to work to get rid of the heat and it will use more energy doing that.
Boats are generally designed with the compressor and coils somewhere, in the lazarette, the engine compartment or a locker. There is usually a cut-out for air to reach the condenser, and usually the compressor itself has a fan to keep the air moving across it.
To keep the refrigerator working at peak efficiency, keep the compressor coils clean, also clean the fan blades while you are at it.
The cooler the air around the compressor and coils, the more efficiently it will work. If you are going to place a big load on the refrigerator by adding a lot of warm food, you want to do it when the air is the coolest such as early morning and late evening.
As ice builds up on the condenser, it actually insulates the condenser from collecting the heat. You should not have more than a ¼” of frost on the condenser. By keeping the unit defrosted on a regular basis, you'll make it much easier for the heat to be removed and the cold air to transfer to your food.
One last thing, to help keep cold air moving around your food. I suggest you by a small battery operated fan to place in the refrigerator. The battery-powered RV refrigerator fans cut initial cool-down time by 50%. RV refrigerator fans help keep your food from spoiling by circulating air evenly at the top and bottom of your unit. They are portable air circulators for any refrigerator. These products can run continuously for 30 days on 2 "D" alkaline batteries. It measures a compact 3-1/2" x 2-1/2" at base. Camco 44123 Fridge Airator is also available and it has a charcoal filled bag that fits in it to absorb orders.
#fan #refrigerator #refrigerator fan #rv refrigerator fan
|
|
|
LunaSafe 10W Qi Charge Pad USB Powered - Power Supply Not Included
Only 5mm thick, the slimmest wireless charger available. Durable mirror panel and aviation aluminum. Built-in over-charging, over-heating, and short-circuit protection. The LED indicator lets you know the charging status. Supports all Luna-Safe products and even works on enabled wireless charging devices such as your cell phones.
Features:
Only 5mm Thick
LED shows charging status
Can charge other wireless devices
5V 2A power supply not included
|
16.46 |
|
|
1000mA (1 Amp) 12VDC Power Supply
12VDC
1 Amp
1000mA
|
19.20 |
|
|
Dual Qi Charge Pad - USB Powered
Only 10mm thick, the slimmest wireless charger available. Built-in over-charging, over-heating and short-circuit protection. The LED indicator lets you know the charging status. Dual 5W pads. Supports all Luna-Safe products and even works on enabled wireless charging devices such as your cell phones.
Features:
LED shows charging status
Can charge other wireless devices
5V 2A power supply not included
|
30.29 |
|
|
AC/DC Power Supply for TV Hub
AC/DC Power supply for all models of KVH TV Hubs. Comes with an inline fuse and both a European and U.S. power adapter.
*Sold as an Individual
|
203.66 |
|
|
Main Power Supply Cable - 42052H
Main power supply of the system
One each battery
Length: 1M (3.3')
|
27.66 |
|
|
Main Power Supply Cable - 42053K
Main power supply of the system
One each battery
Length: 3M (9.8')
|
36.59 |
|
|
Main Power Supply Cable - 42054M
Main power supply of the system
One each battery
Length: 7M (22.9')
|
54.66 |
|