|
Sure-Grip Flush Mount Mounting Base - Fits 2" Flat Surfaces
This Attwood Sure-Grip Flush Mount can fit 2" flat surfaces and is constructed out of extruded aluminum.
Specifications:
Base: Flush base
Fits: 2” flat surfaces
|
5.00 |
|
|
Sure-Grip Clamp-On Rail Base - Fits Up To 7/8" Diameter
This Attwood Sure-Grip Flush Mount can fit a round rail up to 7/8” and is constructed out of extruded aluminum.
Specifications:
Base: Clamp-on rail base
Fits: Round rail up to 7/8 in. diameter
|
6.14 |
|
|
ROKK Mini Self-Adhesive Surface Mount
3M self-adhesive base mount that fits any flat surface.
Features:
No drilling required to install
Works on any flat surface
*Sold as an Individual
|
18.23 |
|
|
Sure-Grip Flat Rail Base - Fits Square Rail
This Attwood Sure-Grip Flush Mount can fit square rails and is constructed out of extruded aluminum.
Specifications:
Base: Flat rail base
Fits: Square rail
|
5.00 |
|
|
Sure-Grip Stainless Steel Rod Holder - 4" & 5-Degree Angle
Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.
Specifications:
Angle: 5-degrees
Stem Length: 4 inches with wing nut
Use for: Horizontal rod position
Includes: 5071 mounting base
|
9.00 |
|
|
Sure-Grip Stainless Steel Rod Holder - 8" & 5-Degree Angle
Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.
Specifications:
Angle: 5-degrees
Stem Length: 8 inches with wing nut
Use for: Horizontal rod position with added clearance
Includes: 5071 mounting base
|
14.57 |
|
|
Sure-Grip Stainless Steel Rod Holder - 4" & 25-Degree Angle
Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.
Specifications:
Angle: 25-degrees
Stem Length: 4 inches with wing nut
Use for: Drifting or trolling
Includes: 5071 mounting base
|
14.57 |
|
|
Sure-Grip Stainless Steel Rod Holder - 4" & 45-Degree Angle
Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.
Specifications:
Angle: 45-degrees
Stem Length: 4 inches with wing nut
Use for: Trolling
Includes: 5071 mounting base
|
15.43 |
|
|
ROKK Mini Surface Mount
Screw-down base mount fits any flat surface.
*Sold as an Individual
|
14.17 |
|
|
Water Pressure Regulator - Flush Mount - White
Easy to install, easy-clean in-line filter, permanently installed flush mount model and in-line model with brass garden hose fittings that connect dockside water entry and garden hose water hook-up. Reduce high water pressures (up to 100 psi down to 35 psi).
Features:
Built-in back flow preventer
Easy-to-install
Easy clean in-line filter
|
40.55 |
|
|
This mount attaches to any flat surface and is easily adjusted for optimal viewing.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.79 |
|
|
Marine Kettle® Bulkhead or Square/Flat Rail Mount
This all 18-8 stainless steel mount attaches to any vertical flat surface such as bulkheads, hulls, transoms or cabin sides. Also mounts to square or flat rails. Fits horizontal rails up to 2-1/4" (57 mm) high by any depth or vertical up to 1- 5/8" (41 mm) wide by any depth.
Rod portion of mount quickly disconnects for easy storage. Some fasteners required for installation.
Compatible With:
Marine Kettle® Grills
*Sold as an Individual
|
57.37 |
|
|
RAM Flat Surface Mount w/Cradle for Garmin dēzl GPS
RAM Cradle Holder for the Garmin dēzl 560LMT & 560LT:
This RAM high strength composite cradle is designed to hold the following devices:
Garmin dēzl 560LMT
Garmin dēzl 560LT
Features:
Open access to all electronic ports including audio port, speaker/mic and mini USB
Patent pending roller design for super smooth placement and removal of the GPS
Custom pocket for factory dock
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
Surface Mount:
Simply choose your preferred mounting location and the possibilities become endless with the RAM-B-138U. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's design also dampens shock and vibration helping to extend the life of your device.
Material: Powder Coated Marine Grade Aluminum
|
18.00 |
|
|
253
Gimbal Mount
Allows the use of Scotty rod holders with factory installed flush mounted rod holders.
Fits 9" x 1-1/2" flush mounts
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
27.95 |
|
|
JABSCO WATER PRESSURE REGULATOR
FLUSH MOUNT MODEL 44411-SERIES
Designed for day and night protection of the entire plumbing system fromunregulated city water system hook-ups. Whether connected to a dock-sidemain or a campground faucet, the new Jabsco Regulator will maintain regulatedoutput at low or high flow rates. The removable strainer protectsvalves and seal-seats from pipe scale and other debris.
FEATURES
Reduces unregulated city water pressures that can runas high as 125 psi down to a safe 45 psi - automatically
Features built-in backflow preventer. Federal and Staterequired on RV's with water service hookup
Flush mounts permanently in vessel super structure
Easily replaces most original city water entries
Automatic pressure regulation
Built-in backflow preventer
Easy cleaning strainer
Dust cap
WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
39.74 |
|