DST810 Smart™ Multisensor 23kHz Bronze NMEA 2000® Transducer - N2K Depth, Speed-Through-Water, Water Temperature, Boat Attitude! The DST810 Smart Multisensor, featuring the new Gen2 paddlewheel and AIRMAR's CAST™ app, delivers a powerful combination of best-in-class speed performance and a simple, reliable way to calibrate accurate speed using your wireless device. The Gen2 paddlewheel delivers industry-leading start-up speed-through-water data below 0.3 knots and is linear at 0.6 knots, maintaining accurate performance up to 45 knots. The DST810 and CAST app provides a simple, consistent way to calibrate speed through the water. The free CAST app delivers calibration options that, until now, were only available through expensive PC-based software. In addition to water temperature, depth, and upgraded 5.7 Hz (5X per second) speed-through-water output with improved speed resolution, the DST810 features an integrated attitude sensor for heel and trim data. This information, combined with Airmar’s powerful and simple CAST app, makes heel-compensated speed calibration across multiple heel angles and speed ranges fast and intuitive, and is independent of the onboard instruments. Features: Smoother Speed – 5.7 Hz speed output (5X per second) for visibly smoother speed-through-water reporting and faster data for better decision-making when every second counts. Integrated Attitude Sensor – for heel and trim and used in advanced speed calibration. Wireless connectivity to AIRMAR's CAST app has new user-friendly benefits: Calibrate the DST810 in a simple, intuitive way from your mobile device. Conduct basic and advanced heel-compensated speed calibrations for improved speed-through-water outputs across the speed range. Advanced speed calibration allows for manual speed entries for multiple heel angles and up to 10 speeds, formerly only possible through expensive PC software. Ultra-responsive speed begins as low as 0.3 knots and becomes linear at 0.6 knots. Speed-through-water readings stay accurate and smooth through 45 knots. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NMEA 2000 Transducer Smart Sensor DTS810 This combination transducer gives you accurate information about depth, speed and water temperature. The transducer is supplied with a thru-hull / ground sleeve for installation in the bottom of the vessel. The transducer can be easily pulled out for cleaning and maintenance. The data from the Triducer can be displayed on any radar, chart plotter, or device that accepts NMEA 0183 or NMEA 2000® data. The Airmar type DST810 breakthrough sensor fits into the Airmar type P617V breakthrough sleeve (included with the DST810). Because the widely used airmar thru-hull transducer type DST800 is also supplied with the thru-hull type P617V, an exchange / upgrade of existing transducers of the type DST800 with the type DST810 is possible without much effort. Popular depth sensor for shallow water performance.

Airmar DT820BV-235-N2 235 kHz Low Profile Tilted Element™ Smart™ Sensor 20° Tilt Bronze NMEA 2000 Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183M (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6'). Airmar's Smart™ Sensors have embedded microelectronics - the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible device or display. Because the ceramic is tilted inside the housing, the transducer beam is oriented straight down, resulting in strong bottom echo returns and accurate depth readings. The retractable housing with a self-closing valve reduces water flow into the vessel when the transducer is removed for cleaning. Smart™ Sensor Features Enhanced depth performance Maximum Depth Range: 180M (594') Minimum range 0.5M (1.6') Urethane face provides better sensitivity Excellent high-speed performance Fixed 20° tilt for 16° to 24° deadrise Fixed 12° tilt for 8° to 15° deadrise Fixed 0° tilt for 0° to 8° deadrise NMEA 2000 output 100 W RMS power Frequency: 235 kHz Cone: 12° All models have depth and temperature 235 kHz eliminates interference with fishfinders Retractable insert provides ease of serviceability Usable Shaft Length: 57mm (2.25") .6M(19.8') NMEA 2000® devicenet cable and connector 51mm (2") housing Blanking plug included Accommodates maximum hull thicknesses 54mm (2-1/8") Accommodates minimum hull thicknesses 6.3mm (0.25") This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Airmar DT812BV-235-N2 235 kHz Low Profile Tilted Element™ Smart™ Sensor 12° Tilt Bronze NMEA 2000 Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183M (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6'). Airmar's Smart™ Sensors have embedded microelectronics - the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible device or display. Because the ceramic is tilted inside the housing, the transducer beam is oriented straight down, resulting in strong bottom echo returns and accurate depth readings. The retractable housing with a self-closing valve reduces water flow into the vessel when the transducer is removed for cleaning. Smart™ Sensor Features Enhanced depth performance Maximum Depth Range: 180M (594') Minimum range 0.5M (1.6') Urethane face provides better sensitivity Excellent high-speed performance Fixed 20° tilt for 16° to 24° deadrise Fixed 12° tilt for 8° to 15° deadrise Fixed 0° tilt for 0° to 8° deadrise NMEA 2000 output 100 W RMS power Frequency: 235 kHz Cone: 12° All models have depth and temperature 235 kHz eliminates interference with fishfinders Retractable insert provides ease of serviceability Usable Shaft Length: 57mm (2.25") .6M(19.8') NMEA 2000® devicenet cable and connector 51mm (2") housing Blanking plug included Accommodates maximum hull thicknesses 54mm (2-1/8") Accommodates minimum hull thicknesses 6.3mm (0.25") This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DT812PV-235-N2 - 235kHz - Plastic Thru Hull Smart Sensor - 12° Tilt - NMEA 2000 - 6M Cable Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183 m (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6'). Available in fixed 0°, 12°, or 20° tilt, the DT800 is perfect for power and sailboat applications. It is sold with a choice of rugged housings— plastic, bronze, or stainless steel—to accommodate any vessel type or hull material. These low-profile housings do not affect hull performance and will provide accurate readings at high speeds. Airmar's Smart™ Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible device or display. Because the ceramic is tilted inside the housing, the transducer beam is oriented straight down, resulting in strong bottom echo returns and accurate depth readings. The retractable housing with a self-closing valve reduces water flow into the vessel when the transducer is removed for cleaning. Smart™ Sensor Features Broadband ceramic available with 0°, 12° and 20° tilt options Enhanced depth performance Maximum Depth Range: 180M (594’) Minimum range 0.5M (1.6’) Urethane face provides better sensitivity Excellent high-speed performance Fixed 12° tilt for 8° to 15° deadrise NMEA 2000 output 100 W RMS power Frequency: 235 kHz Cone: 12° All models have depth and temperature 235 kHz eliminates interference with fishfinders Retractable insert provides ease of serviceability Usable Shaft Length: 57mm (2.25”) 6M(19.8”) NMEA 2000® devicenet cable and connector 51mm (2”) housing Blanking plug included Accommodates maximum hull thicknesses 54 mm (2 1/8”) Accommodates minimum hull thicknesses 6.3 mm (0.25”) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DST-810 Bronze Triducer Multisensor NMEA 2000 N2K - 6M Cable The DST810 Smart Multisensor, together with Airmar's CAST™ App, is the convergence of advanced hull data, matched with a simple and reliable way to calibrate accurate speed via a wireless device. This changes how boaters receive and deliver information to get greater performance from their hull. It is a simple, consistent way to calibrate speed-through-water regardless of what display system is on board. The DST810 and Airmar CAST App deliver capabilities that until now, were only available through expensive PC-based software. Besides water temperature, depth and newly upgraded 5 Hz (5X per second) speed-through-water output, the DST810 features an integrated attitude sensor for heel and trim data. This information, combined with Airmar’s powerful and simple CAST App, makes heel-compensated speed calibration across multiple heel angles and speed ranges both fast and intuitive and is independent of the onboard instruments. All speed calibrations and NMEA configurations are stored in the DST810 sensor—not in the displays.

DST-810 Plastic Triducer Smart™ Multisensor NMEA2000 N2K - 6M Cable Depth, Speed-Through-Water, Water Temperature, Boat Attitude The DST810 Smart Multisensor, together with Airmar's CAST™ App, is the convergence of advanced hull data, matched with a simple and reliable way to calibrate accurate speed via a wireless device. This changes how boaters receive and deliver information to get greater performance from their hull. It is a simple, consistent way to calibrate speed-through-water regardless of what display system is on board. The DST810 and Airmar CAST App deliver capabilities that until now, were only available through expensive PC based software. Besides water temperature, depth and newly upgraded 5 Hz (5X per second) speed-through-water output, the DST810 features an integrated attitude sensor for heel and trim data. This information, combined with Airmar’s powerful and simple CAST App, makes heel-compensated speed calibration across multiple heel angles and speed ranges both fast and intuitive, and is independent of the onboard instruments. All speed calibrations and NMEA configurations are stored in the DST810 sensor—not in the displays.  Features: 5 Hz speed output (5X per second) for visibly smoother speed-through-water reporting and faster data for better decision making Integrated attitude sensor for heel and trim benefits sailing and power boats Simple attitude calibration to correct for off-center mounting Wireless connectivity to Airmar's CAST App has new user-friendly benefits: Calibrate the DST810 in a simple, intuitive way regardless of the instrument brand or model that is on board Conduct basic and advanced heel-compensated speed calibrations for improved speed-through-water outputs across the speed range Advanced Speed Calibration allows for manual speed entries for multiple heel angles and up to 10 speeds, formerly only possible through expensive PC software Enable and disable PGN’s and set offset and output rates

DST810 Plastic Smart Sensor 235kHz - NMEA 2000 - Bluetooth Depth, Speed-Through-Water, Water Temperature, Boat Attitude For a product to be considered a “breakthrough,” it has to vastly change conventional behavior and enhance abilities. The  DST810 Smart Multisensor, featuring the new Gen2 paddlewheel together with Airmar's CAST™ App, is the convergence of advanced hull data, matched with a simple and reliable way to calibrate accurate speed via a wireless device. This changes how boaters receive and deliver information to get greater performance from their hull. It is a simple, consistent way to calibrate speed-through-water regardless of what display system is on board. The DST810 and Airmar CAST App deliver capabilities that until now, were only available through expensive PC-based software. Besides water temperature, depth, and upgraded 5 Hz (5X per second) speed-through-water output, the DST810 features an integrated attitude sensor for heel and trim data. This information, combined with Airmar’s powerful and simple CAST App, makes heel-compensated speed calibration across multiple heel angles and speed ranges both fast and intuitive and is independent of the onboard instruments. All speed calibrations and NMEA configurations are stored in the DST810 sensor—not in the displays. Features 5 Hz speed output (5X per second) for visibly smoother speed-through-water reporting and faster data for better decision making Integrated attitude sensor for heel and trim benefits sailing and powerboats. Simple attitude calibration to correct for off-center mounting Hull Deadrise: Up to 22° Depth Frequency: 235 kHz Minimum Depth Range: 0.5 m (1.6') Maximum Depth Range: Up to 100 m (330')—NMEA 2000® Speed Range: Up to 45 knots Wireless Protocol: Bluetooth Low Energy (BLE) Wireless Range: Up to 30 feet depending on mount location Standard Cable Length: 6 m (20') DeviceNet—NMEA 2000® Temperature Sensor Accuracy: ±0.5°C (±1.8°F) Temperature Sensor Range: -10°C to 40°C (14°F to 104°F) Supply Voltage: 9 VDC to 16 VDC—per NMEA 2000 Wireless connectivity to Airmar's CAST App has user-friendly benefits: Calibrate the DST810 is a simple, intuitive way regardless of the instrument brand or model that is on board Conduct basic and advanced heel-compensated speed calibrations for improved speed-through-water outputs across the speed range Advanced Speed Calibration allows for manual speed entries for multiple heel angles and up to 10 speeds, formerly only possible through expensive PC software Enable and disable PGN’s and set offset and output rates The Perfect Sensor for Every Use SAILING 5 Hz speed output for visibly smoother speed data. Incredibly easy calibration via Airmar's CAST App. Wirelessly connect, calibrate speed, and configure data. DST810 stores configurations and delivers data to the NMEA 2000® network. Depth, heel-corrected speed-through-water, heel and trim, and water temperature from one installed multisensor. POWERBOATS 5 Hz speed, depth, pitch and roll, and water temperature from one installed instrument. Simple depth offsets and corrected speed-through-water via Airmar's CAST™ App. Popular depth sensor for shallow-water performance. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

N2K Protect NMEA 2000 Network Guard With more technically advanced, integrated, and “connected” boats, security becomes a major concern.  Recent high-profile automotive hacks have highlighted security weaknesses in some CAN-based systems. The NMEA Organisation has responded to this threat by establishing a Cyber Security Working Group to identify and mitigate the risks of maritime attacks  N2K Protect is the World’s first cyber security product, focused on NMEA 2000, to be developed as part of this NMEA initiative N2K Protect is a self-contained, bus-powered, unobtrusive black box that receives and analyses all NMEA 2000 network data.   Key Functions: Test and validate the NMEA 2000 network during installation Tools for NMEA 2000 configuration and network monitoring/analysis Ongoing 24/7 monitoring and protection for the life of the vessel Features: World’s first NMEA 2000 Cyber Security Device Tests & validates the NMEA 2000 network during installation Allows configuration of other NMEA 2000 devices View and analyze the NMEA 2000 network with device and PGN displays plus raw data logging 24/7 monitoring of the NMEA 2000 network An integrated WiFi antenna can create its own WiFi network or join the vessel’s wireless network Configuration and monitoring via built-in web interface 92dB internal buzzer for alerts Ability to generate SMS alert messages when used with a Digital Yacht 4GX or 5GX product for remote alerts Self-contained, bus-powered, unobtrusive IP54-rated black box Future-proof design, with easy-to-update firmware via web interface to keep unit aligned with current threats User Installation & Interface: Simple physical installation – just “T” into the NMEA 2000 backbone.  N2K Protect is network powered N2K Protect has a built-in wireless interface so any browser-enabled device can access its functionality – phone, iPad, tablet, or PC Simply search for its secure wireless network and log Capability to join another network on larger systems No complicated or proprietary apps

GPS160 TriNav Sensor w/iKonvert NMEA 2000 Interface Bundle The GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies. TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc The GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables. The GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification. The GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability. Galileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020. Features: 72 channel GPS, Glonass and Galileo GNSS positioning receiver Typically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy Can be configured as dedicated GPS, Glonass or Galileo only device Sophisticated anti-spoofing algorithm for robust positioning performance and interference rejection Available in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants GPS160USB also available with USB connection for PC/MAC User/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches Multiple formats of NMEA data output including datum information –user configurable through internal DIP switches Up to 18Hz update rate (user selectable) Ultra low (<20mA) power consumption at 12V DC Input for MOB switch/system – when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter Professional system (ECDIS) support with datum sentence structure (DTM/GBS/GNS/GRS/GSA/GST) Puck installation or fits 3rd party industry standard 1” x 14 TPI threaded mount

iAISTX Plus Class B Wireless & NMEA 2000 Transponder iAISTX Plus has been designed specifically for the growing number of boaters who use an iPad or Android tablet for their navigation tasks. As a full function Class B transponder, it sends your boat position and identity data to other AIS equipped vessels as well as providing a wireless interface for mobile devices with popular apps to display received data from other AIS equipped vessels. This PLUS model also has a NMEA 2000 interface (with integral drop cable) so that it can integrate with modern plotters, instruments and multi-function displays to provide AIS functionality. iAISTX Plus creates a secure, password protected, local Wi-Fi network which allows AIS and GPS data to be sent to popular iOS and Android apps such as Navionics, iSailor, Weather4D, SailGrib, iNavX, TimeZero and more. These apps offer a detailed overlay of local AIS targets all updated in real-time. Depending upon the app, you can click on a target and can see identity as well as collision avoidance data such as CPA (closest point of approach) and TCPA (time to closest point of approach). AIS transponders require one time programming with the boat’s identity and physical dimensions and this is done through a simple, embedded web interface via the tablet’s browser (Safari, Chrome, etc.).  This can also be used to silence the transmission and set up wireless parameters such as passwords.  Installation is simple – just connect power (12/24v), mount the supplied external GPS antenna and connect to a separate dedicated VHF antenna or to the boat’s existing VHF antenna using our SPL1500 or SPL2000 AIS-VHF antenna splitters. Features: Class B AIS transponder with a wireless interface for phones, tablets, iPads and PCs NMEA 2000 interface for plotter and multi function display AIS compatability Support for all the latest target types such as ATONs and AIS MOB devices Latest HF AIS technology for superior performance UDP and TCP/IP protocols supported for up to 7 connected devices Password protected, secure wireless connection Internal wifi antenna will typically footprint a boat up to 60ft in length Supplied with external GPS antenna and 10m (33ft) cable which can be deck mounted or fitted to standard 1” mount Compatible with 100s apps.  See our reviews at www.digitalyacht.net LED status indicators for wireless connection, data, status, time out, power and silent mode Easy embedded web interface for programming Measures just 20 x 14 x 4.5cm 12/24V operation and ultra-low 2W consumption

Furuno DT-800MSF - Airmar B617V Housing Style Transducer Designed with Airmar's exclusive Broadband Ceramic Technology, the DT-800MSF's 235 kHz element improves resolution without sacrificing sensitivity. The higher power rating 100W RMS provides spot-on depth readings in as little as 0.45M (1.4') of water and can reach depths up to 180M (600') Standard Features: Depth and temperature in one compact bronze housing Fast-response temperature sensor provides ±0.2°C (±0.1°F) accuracy Weight: 1.5kg (3.4lb) Acoustic Window: Urethane Data Update Rate: 1 per second Minimum Sounding Depth: 0.5M (1.6') Maximum Sounding Depth: 180M (590) Pressure Rating: 3M (10') Pulse Rate: 20,000 p/nm* (5.6 Hz per knot) Smart Sensor Supply Voltage at 100% Sound Power Output: 10 VDC to 25 VDC Supply Current: 40 mA Standard Cable Length: 6M NMEA 2000® Load Equivalency Number (LEN): 4 *p/nm = pulses per nautical mile WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ST800PV-N2 NMEA 2000 Speed & Temp Transducer The ST800 speed and temperature sensor process digital signals inside the thru-hull housing. Then this Smart™ Sensor sends data to a chart plotter, radar screen, or digital display in either analog or NMEA 2000® format. These low-profile units are nearly flush, minimizing drag with only 5 mm (3/16") extending outside of the hull.  Features: Speed and fast-response water-temperature sensing Speed range from 2 to 45 knots (2 to 52 MPH) NMEA 2000 or NMEA 0183 analog output Retractable insert in a low-profile housing with a water valve Available in a plastic (P120) or bronze (B120) housing Airmar's Smart™ Sensor technology Specifications: Plastic: 0.7 kg (1.4 lb.) Bronze: 1.3 kg (2.8 lb.) Hull Material: Plastic: Fiberglass or metal/Bronze: Fiberglass or wood Hole Diameter: 51 mm or 2" Speed Range: 2 to 45 knots (2 to 52 MPH) Water Temperature: Range: -10 to 40°C (14 to 104°F)/ Accuracy: ±0.5°C (±1.8°F) Pressure Rating: 3 m (10') Data: Output Protocol: NMEA 0183 or NMEA 2000/Update Rate: 1 time/s Power: Supply Voltage: 9 to 16 VDC/Supply Current: <200 mA/NMEA 2000 Load Equivalency Number (LEN): 2 Standard Cable Length: NMEA 2000: 6 m (20')/NMEA 0183: 9 m (30') Includes: Blanking plug Certifications and Standards: CE, IEC60945 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

UST850 Smart Sensor NMEA 2000 - Plastic Housing AIRMAR's UST850 just turned your maintenance time into more cruising time…and made your boat smarter too. Ultrasonic speed and temperature in one single housing with no moving parts makes this sensor a high precision, low maintenance solution for use on power and sail boats of all types and sizes. Say goodbye to paddlewheel maintenance and hello to Smart technology, from the company who invented the Smart Sensor.  Features: Easily retrofitted into Airmar’s ST650/ST850 Series without haul out! Ultrasonic Speed & Temperature in one housing with no moving parts Precise readings at high speeds ideal for powerboats and performance sailing Fast data update rate (up to 10 x per second) Speed Range (0.1 to 50 knots) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NMEA 2000 Compatibility Kit  This NMEA 2000 Kit allows Polk's Ultra Marine Certified P1 and PA4A to be seamlessly added to your boat's onboard NMEA 2000 network, enabling control and two-way communication from your boat's Garmin and Raymarine Chartplotter/Fish Finder Multi-Function Display (MFD) device. Control functions include source selection, playback functions, volume up/down and more.  Two-way communication between the Polk P1 and PA4A and your MFD also allows the display of source selection, song/track/album title (no album art), radio frequency and more to display on the MFD interface.  Comaptable With:  Polk PA4A receiver Polk P1 Marine receivers  In the Box: NMEA2000 interface module 12" NMEA 2000 cable 11" Y-adapter cable *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.