keywords: Xtreme heaters, boat heater, marine heater, engine heater, heater  

Quick Release Bracket for 300W Heater  Install and Remove your Xtreme Heater FAST! Driven by customer demand, our quick-release bracket was designed specifically for your Xtreme heater and allows you to easily install and remove your heater(s) in seconds, without the need for tools. Using this bracket, your mounting options include locations you may not have considered due to concern for blocked access to other components in your tight engine space. For our customers who prefer to leave their heater(s) in place only during the winter months, THIS is the accessory you've been asking for. The quick-release bracket makes it simple to remove the heater for the boating season, leaving just the low-profile bracket installed and ready to go. When winter returns, lock it down, and plug it in! Features: Built Xtreme Tough, anodized aluminum construction will not corrode Provides easy off-season storage, for quick access to engine spaces Works on ALL Xtreme Heaters built after 2004 Quickly Install and Remove your Heater Without Tools! One Year Warranty

Quick Release Bracket for 450W & 600W Heaters Install and Remove your Xtreme Heater FAST! Driven by customer demand, our quick-release bracket was designed specifically for your Xtreme heater and allows you to easily install and remove your heater(s) in seconds, without the need for tools. Using this bracket, your mounting options include locations you may not have considered due to concern for blocked access to other components in your tight engine space. For our customers who prefer to leave their heater(s) in place only during the winter months, THIS is the accessory you've been asking for. The quick-release bracket makes it simple to remove the heater for the boating season, leaving just the low-profile bracket installed and ready to go. When winter returns, lock it down, and plug it in! Features: Built Xtreme Tough, anodized aluminum construction will not corrode Provides easy off-season storage, for quick access to engine spaces Works on ALL Xtreme Heaters built after 2004 Quickly Install and Remove your Heater Without Tools! One Year Warranty

Xtreme Heater Xtreme Heater is the must have accessory for the serious boater who wants to enjoy their boat year-round. Don't spend time and money to winterize your boat and miss out on enjoying your boat during the fall and winter months. Don't let the small size fool you, our bilge heaters generate more heat than any other boat heater on the market in a shorter time period. Less run time saves you money.

Small 400W XHEAT Boat Bilge & RV Heater This Xtreme boat bilge and RV heater is suitable for boats up to 24' in length and small RV compartments. Features: True forced air heating circulates air more effectively and heats it more evenly for more accurate climate control The automatic thermostat turns the heater on at 40°F and off at 55°F +/-3° - the tightest tolerance available Failsafe Design cannot overheat (heating technology is dynamic and self-regulating) High Efficiency Xtreme produces heat faster, circulates more air, and shuts off earlier A pre-wired 15 ft. marine-rated power cord with a 110V 3 prong plug eases installation Designed for durability and reliability Complete protection (fully anodized inside and out) Small footprint Certified and independently tested now with the UL 1278 standard Specifications: Wattage: 400W BTU: 1365 Inrush (startup) Current: 8.2 A, 1 sec. Typical Operating Current: 4. A Fan Flow: 40CFM Heater Dimensions (inch): 5.75″ x 3.5″ x 5-1/8″ Fuse Size Required: 15A Power Cord: 15 ft. marine-rated power cord

Large 800W XXXHEAT Boat Bilge & RV Heater This Xtreme boat bilge and RV heater is suitable for boats up to 35' in length and medium RV compartments. Features: True forced air heating circulates air more effectively and heats it more evenly for more accurate climate control The automatic thermostat turns the heater on at 40°F and off at 55°F +/-3° - the tightest tolerance available Failsafe Design cannot overheat (heating technology is dynamic and self-regulating) High Efficiency Xtreme produces heat faster, circulates more air, and shuts off earlier A pre-wired 15 ft. marine-rated power cord with a 110V 3 prong plug eases installation Designed for durability and reliability Complete protection (fully anodized inside and out) Small footprint Certified and independently tested now with the UL 1278 standard Specifications: Wattage: 800W BTU: 2729.7 Inrush (startup) Current: 14A, 1 sec. Typical Operating Current: 6.5A Fan Flow: 40 CFM Heater Dimensions (inch): 8″ x 3.5″ x 5-1/8″ Fuse Size Required: 20A Power Cord: 15 ft. marine-rated power cord

Medium 600W XXHEAT Boat Bilge & RV Heater This Xtreme boat bilge and RV heater suit boats up to 28' in length and medium RV compartments. Features: Accurate forced air heating circulates air more effectively and heats it more evenly for more accurate climate control The automatic thermostat turns the heater on at 40°F and off at 55°F +/-3° - the tightest tolerance available Failsafe Design cannot overheat (heating technology is dynamic and automated) High Efficiency Xtreme produces heat faster, circulates more air, and shuts off earlier A pre-wired 15 ft. marine-rated power cord with a 110V 3 prong plug eases installation Designed for durability and reliability Complete protection (fully anodized inside and out) Small footprint Certified and independently tested now with the UL 1278 standard Specifications: Wattage: 600W BTU: 2047.3 Inrush (startup) Current: 12A 1 sec. Typical Operating Current: 5.5 A Fan Flow: 40 CFM Heater Dimensions (inch): 8″ x 3.5″ x 5-1/8″ Fuse Size Required: 15A Power Cord: 15 ft. marine-rated power cord

Boat, Cabin, & RV Heater This Xtreme boat and cabin heater is designed to help keep your boat cabin, RV, or other small space comfortable during the fall and winter months.  This heater features quiet operation, a low profile, and a stable base that prevents tipping. Drawing air from the top, this heater can be placed up against walls or on carpeted surfaces without blocking the air intake. The 1500-watt heat setting will quickly warm your living space, while the 750-watt setting will efficiently maintain comfortable temperatures. The 6 ft. power cord offers more flexibility for heater placement independent of outlet locations.  Features: Built-in overheat protection "One Shot" secondary overheat protection Two heat settings: 750/1500 and 1500 watts Freeze prevention thermostat setting Fan-only setting Automatic thermostat 6 ft. power cord UL Listed to UL 1278 standards Specifications: Color: White/black Wattage: Low: 750 / High: 1500 Amps: Low: 6.25 / High: 12.5 Voltage: 120V Dimensions (inch): 10″ L x 10-1/4" W x 4-3/4"  H Cord Length: 6 ft. Weight: 5lbs

Freeze Spray 3.5oz Can An economical, general-purpose freeze spray with a wide spray for cooling to test the functionality of the heater just sprays on the test area of your heater to turn it on. To test the functionality of the heater, just spray the test area of your heater to turn it on. The economical, general-purpose freeze spray with a wide spray for cooling. We recommend testing upon installation and then 4 times a year. Features: Rapidly cool an area to –60°F/–51°C Wide spray for cooling large areas immediately Safe on plastics Non-flammable CFC/HCFC free & ozone-safe Specifications: Weight: 1 lb. Dimensions: 7 × 2.5 × 2.5 in.

Groco S-73-X Tie Rod Outside 316 SS .250 X 6.75  

Ampco Fluid End Aluminum Bronze Full Impeller for KC2 1 X 3/4

Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame

Headhunter XRS-124 X-CAL 12/24V Pump X-Caliber – 12-24V DC Water Pressure Pump Quiet, reliable, blasting water pressure. Combining advanced DC motor and control technology with a proven self-priming centrifugal pump, the X-caliber surges past the competition with a flood of features. A built in microprocessor interfaced with a rugged ceramic temperature and pressure sensor provides variable speed operation, prevents dry running damage and ensures complete electrical protection.   Part#Description   XRS-124X-Caliber 12-24 VDC Saltwater Pressure System   Control Panel: Program power and pressure settings via the integrated control panel. Four colored LED’s display current settings and alarm conditions.   Advanced Features: Adjustable cut in pressure Adjustable power setting Operates on 12 or 24VDC Over voltage protection Under voltage protection Over current protection Anti-flooding protection Dry run protection Variable Speed Rotating bracket   Product Details/Specifications:   Liquid Temp 32°F (0°c)-104°F (40°c) Ambient Temp 32°F (0°c)-122°F (50°c) Max Pressure 67 PSI (4.5 bar) Max Flow 10 GPM (38 lpm) Suction/Discharge 3/4” FPT (Optional metric adapter) Weight 16lbs (7.2 kg) Dimensions 15”(382mm)L 8”(203mm)W 7”(178mm)H      

Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim

Iwaki MX-F401-RFV-X Magnetic Drive Centrifugal Pump Head Only Type: Centrifugal Head Material: Polypro Connections: MPT Seals: PTFE Drive: Magnetic Minimum Flow (gpm): 75.000 Maximum Pressure (psi): 41 Inlet: 1-1/2" Outlet: 1-1/2" Specific Gravity: 1 Maximum Head: 50   Lead Time 2 to 3 weeks, Special Order