 |
Industrial Kit with AT-8040 Adhesive
This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops. A Wide Selection Of Weld Mount Parts Are Supplied In A Heavy "Durham" Metal Box Which Is A Standard Rack Mounted System. The Kit Contains 1 Tubes Of Our AT-8040 No Slide Multi Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastics And Rubber. AT-8040 Will Hold Even Our Heaviest Parts On An Overhead Or Vertical Surface Without Fixturing. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225 Degrees. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 1 year.
The Weld Mount System Eliminates The Need To Drill And Tap, or Weld When Used On Metal Surfaces. Great for Mounting Wire and Conduit Runs, Electrical Boxes And Other Structural Applications.
The AT-7001 Kit Contains:
(1) AT-8040 - No Slide Multi Bonder Adhesive With 12 Minute Kick
(10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive
(1) AT-300 - Adhesive Dispensing Gun
(30) AT-3B - Small Black Cable Tie Mount
(100) AT-5B - Large Black Cable Tie Mount
<(25) AT-5 - Large White Cable Tie Mount
(25) AT-7 - Aluminum Base Swivel Wire Tie Mount
(25) AT-9 - Aluminum Wire Tie Mount
(2) AT-113 - Large Footman's Strap White
(2) AT-113B - Large Footman's Strap Black
(6) ST125-1420-12SS - 0.75" Long Stud With 1/4 x 20 Threads 1.25" Base
(6) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base
(6) ST125-1024-12SS - 0.75" Long Stud With #10 x 24 Threads 1.25" Base
(6) ST125-1024-20SS - 1.25" Long Stud With #10 x 24 Threads 1.25" Base
(2) SHC-1000 - Single Hose Clamp 1.00"
(2) DHC-1000 - Double Hose Clamp 1.00"
(1) Storage Box - Durham Manufacturing 18.5' x 12.5" x 3.25"
Step By Step Instructions
|
350.40 |
|
 |
Industrial Kit - No Adhesive
This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops. A Wide Selection Of Weld Mount Parts Are Supplied In A Heavy "Durham" Metal Box Which Is A Standard Rack Mounted System.
The Weld Mount System Eliminates The Need To Drill And Tap, or Weld When Used On Metal Surfaces. Great for Mounting Wire and Conduit Runs, Electrical Boxes And Other Structural Applications.
The AT-7008 Kit Contains:
(10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive
(1) AT-300 - Adhesive Dispensing Gun
(30) AT-3B - Small Black Cable Tie Mount
(100) AT-5B - Large Black Cable Tie Mount
(25) AT-5 - Large White Cable Tie Mount
(25) AT-7 - Aluminum Base Swivel Wire Tie Mount
(25) AT-9 - Aluminum Wire Tie Mount
(2) AT-113 - Large Footman's Strap White
(2) AT-113B - Large Footman's Strap Black
(6) ST125-1420-12SS - 0.75" Long Stud With 1/4 x 20 Threads 1.25" Base
(6) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base
(6) ST125-1024-12SS - 0.75" Long Stud With #10 x 24 Threads 1.25" Base
(6) ST125-1024-20SS - 1.25" Long Stud With #10 x 24 Threads 1.25" Base
(2) SHC-1000 - Single Hose Clamp 1.00"
(2) DHC-1000 - Double Hose Clamp 1.00"
(1) Storage Box - Durham Manufacturing 18.5' x 12.5" x 3.25"
Step By Step Instructions
|
318.40 |
|
 |
No Slide Metal/Composite Bonder
Revolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping.
Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to as received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used.
Features:
Revolutionary Adhesive
Parts Stay Where Placed Without Sliding
For Use Overhead and on Vertical Surfaces
No Need for Fixtures
|
33.01 |
|
 |
No Slide Metal/Composite Bonder - Case of 10
Revolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping.
Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to as received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used.
Features:
Revolutionary Adhesive
Parts Stay Where Placed Without Sliding
For Use Overhead and on Vertical Surfaces
No Need for Fixtures
Case of 10
|
298.64 |
|
 |
Executive Adhesive & Fastener Kit w/AT-8040 Adhesive
This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Contains 1 Tube Of Our AT-8040 No Slide Multi Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastic Or Rubber. AT-8040 Will Hold Even Our Heaviest Parts on a Vertical or Overhead Surface Without Fixturing. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225°. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 1 year.
The Weld Mount System Eliminates The Need To Drill Into Cored Composites Which Can Result In Hull & Deck Delaminations. No Need To Drill, Tap, or Weld When Used On Metal Surfaces. Great For Mounting Electronics, Wire Runs, Bilge Applications, Water Separators, Battery Switches, Etc.
The AT-1001003 Kit Contains:
(1) AT-8040 - No Slide Multi Bonder Acrylic Adhesive
<(1) AT-300 - Dispensing Gun
(10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive
(100) AT-5 - Large White Cable Tie Mount
(50) AT-3 - Small White Cable Tie Mount
(4) AT-113 - Large Footman's Strap
(10) PS62-832-16SS - 1.00" Long Panel Stud
(4) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base
(4) ST125-1420-24SS - 1.50" Long Stud With 1/4 x 20 Threads 1.25" Base
(4) ST125-1024-12SS - .75" Long Stud With #10 x 24 Threads 1.25" Base
(4) ST125-1024-24SS - 1.50" Long Stud With #10 x 24 Threads 1.25" Base
(1) Plano Storage Box 14" x 9" x 2.75"
Step By Step Instructions
|
238.40 |
|
 |
Executive Fastener Kit - No Adhesive
This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Does NOT Contain Acrylic Adhesive
The Weld Mount System Eliminates The Need To Drill Into Cored Composites Which Can Result In Hull & Deck Delaminations. No Need To Drill, Tap, or Weld When Used On Metal Surfaces. Great For Mounting Electronics, Wire Runs, Bilge Applications, Water Separators, Battery Switches, Etc.
The AT-1001008 Kit Contains:
(1) AT-300 - Dispensing Gun
(10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive
(100) AT-5 - Large White Cable Tie Mount
(50) AT-3 - Small White Cable Tie Mount
(4) AT-113 - Large Footman's Strap
(10) PS62-832-16SS - 1.00" Long Panel Stud
(4) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base
(4) ST125-1420-24SS - 1.50" Long Stud With 1/4 x 20 Threads 1.25" Base
(4) ST125-1024-12SS - .75" Long Stud With #10 x 24 Threads 1.25" Base
(4) ST125-1024-24SS - 1.50" Long Stud With #10 x 24 Threads 1.25" Base
(1) Plano Storage Box 14" x 9" x 2.75"
Step By Step Instructions
|
202.60 |
|
 |
Single Clamp
Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.
Features:
Hose OD: 0.250"
Stud Required: ST125-1420-12SS
Clamp Dimensions L/W/D: 0.87" x 0.47" x 0.41"
Recommended Clamp Spacing: 3'
|
17.83 |
|
 |
Single Clamp
Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.
Features:
Hose OD: 0.375"
Stud Required: ST125-1420-16SS
Clamp Dimensions L/W/D: 1.06" x 0.63" x 0.56"
Recommended Clamp Spacing: 3'
|
23.78 |
|
 |
Single Clamp
Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.
Features:
Hose OD: 0.5"
Stud Required: ST125-1420-24SS
Clamp Dimensions L/W/D: 1.39" x 0.79" x 0.89"
Recommended Clamp Spacing: 4'
|
32.21 |
|
 |
Single Clamp
Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.
Features:
Hose OD: 0.625"
Stud Required: ST125-1420-24SS
Clamp Dimensions L/W/D: 1.39" x 0.79" x 0.89"
Recommended Clamp Spacing: 4'
|
32.21 |
|
 |
Single Clamp
Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.
Features:
Hose OD: 0.75"
Stud Required: ST125-1420-28SS
Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18"
Recommended Clamp Spacing: 4'
|
42.11 |
|
 |
Single Clamp
Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.
Features:
Hose OD: 1.0"
Stud Required: ST125-1420-28SS
Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18"
Recommended Clamp Spacing: 5'
|
42.11 |
|
 |
Double Clamp
Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.
Features:
Hose OD: 0.25"
Stud Required: ST125-1420-12SS
Clamp Dimensions L/W/D: 1.22" x 0.47" x 0.41"
Recommended Clamp Spacing: 3'
|
23.29 |
|
 |
Double Clamp
Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.
Features:
Hose OD: 0.375"
Stud Required: ST125-1420-16SS
Clamp Dimensions L/W/D: 1.54" x 0.63" x 0.56"
Recommended Clamp Spacing: 3'
|
33.19 |
|
 |
Double Clamp
Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.
Features:
Hose OD: 0.5"
Stud Required: ST125-1420-24SS
Clamp Dimensions L/W/D: 2.08" x 0.79" x 0.89"
Recommended Clamp Spacing: 4'
|
49.06 |
|
