Hypro 6500N-R, Roller Pump Ni-Resiet Rev   Hypro 6500N-R 6-Roller Pump, REVERSED, With Ni-Cast Case, Super Rollers, Viton Seals, 3/4" NPT Ports, Solid 5/8" Shaft.  Great for pest control applications.   HYPRO NI-RESIST Roller Pump. High volume and pressure. For livestock spraying, fertilizer application, weed and pest control. Spray wettable powders and chemicals. CCW (reverse by disassembling and reversing rotor in housing). NI-RESIST for more corrosive chemicals. NI-RESIST features high nickle content to give longer life.   Performance Information   • Max. flow:- 9.7 gpm/36.7 lpm at 540 rpm- 18.2 gpm/68.9 lpm at 1000 rpm- 21.8 gpm/82.5 lpm at 1200 rpm • Max. pressure:- Continuous 100-150 psi/6.9-10.3 bar- Intermittent 300 psi/20.7 bar • Max. rated speed: 1200 rpm • Max. fluid temperature: 140°F/60°C

Little Giant Manual Submersible Sump Pump 506271 Little Giant 6-CIM-R Manual Submersible Sump Pump Motor 115 Volt 60 Hz 1/3 HP Permanently Lubricated Oil Filled Continuous Duty Motor, 46 GPM at 5 Foot Head, Shutoff Head 18 Feet, Inlet: Screened, Outlet: 1-1/2" FNPT with 1-1/4" FNPT and Male Garden Hose Adaptors, Epoxy Coated Cast Iron Housing, Polypropylene Body, Mechanical Seal, Manual Operation, UL/CSA Listed, 10 Foot Power Cord   506271 For residential and light commercial use, the manual 6-CIM-R submersible sump pump provides efficient and reliable service.

Sherwood R-10870G WESTERBEKE PUMP 11353 Pump Body: Bronze Ports: 3/4" NPT Cam: Full Impeller: Neoprene Shaft Seal: Mechanical Drive: Pulley Driven Pedestal Pump Keyed Shaft Universal and Westerbeke Light Plants Government Light Boats 11353 38445

Hypro 7560N-R, Roller Pump Ni-Resist Rev   Ni-Resist 8-Roller Pump w/ Super Rollers, Super Rotor, Viton Seals, 20.1 GPM, 300PSI, 1000RPM, 3/4" NPT, 15/16" Shaft   Performance Information   Max. flow: 12 gpm/45.4 lpm at 540 rpm Max. flow: 22.5 gpm/85.2 lpm at 1000 rpm Max. pressure: continuous 100 psi/6.9 bar Max. pressure: intermittent 300 psi/20.7 bar Max. rated speed: 1000 rpm Max. fluid temperature: 140°F/60°C Other Attributes   Rollers: Super Rollers standard (Poly, Teflon and Buna-N available) Housing: Cast Iron, Ni-Resist or Silvercast Port sizes: 3⁄4" NPT Shaft: 15⁄16" solid Shaft rotation: CW 1" hose barb inlet fitting for 1000 rpm operation Shaft Seals: Viton standard (Buna-N available) Available PTO adapters Rotor: Cast Iron, Ni-Resist and Silvercast Recommended PTO torque arm kit 3430-0540

Sherwood R-102 General Purpose Pump Pump Body: Bronze Ports: 1" NPT Cam: Full Impeller: Neoprene Shaft Seal: Mechanical Drive: Pulley Driven Pedestal Pump   Flexible Impeller General Purpose Engine Cooling Pump  

No matter whether you are an experienced boater looking for a replacement pump or a manufacturer specifying pumps for your marine application, we are prepared to provide you with the support you need. And no matter where you work or live, access to our products, services, spare parts and support are never far away. In fact, you will find SPX FLOW's Johnson Pump marine brand represented in every major industrial country of the world today and in more than sixty nations altogether.   SHOP JOHNSON PUMP     The Aqua Jet five chamber diaphragm pump provides the perfect water pressure or deck wash solution for both small and medium sized leisure and commercial boats as well as mobile homes, campers and summer homes.     Quiet and pulsation-free even at low speeds. Efficient and compact, Aqua Jet pumps are particularly suitable where low amperage and sound levels in relation to water flow are placed at a premium-such as in shower and galley applications. Integrated pressure switch turns pump on and off automatically when tap is opened and closed. Operates in fresh or sea water.   SHOP THE Aqua Jet five chamber diaphragm pump     Specials    Closeouts    Remanufactured    Rebates  

Rule-Mate 1500 GPH 12 Volt Fully Automated Bilge Pump The Rule-Mate® 1500 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8". Rule-Mate Intelligence Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to "check" for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2" and shutting off at 5/8". 1500 GPH (6819 LPH) at 0' (13.6V) All-in-one pump and switch Extra long life heavy duty motor 1" NPS discharge with 1" AND 1 1/8" screw-on ports Three year warranty WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Rule-Mate 2000 GPH 12 Volt Fully Automated Bilge Pump The Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8". Rule-Mate Intelligence Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to "check" for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2" and shutting off at 5/8". 2000 GPH (7570 LPH) at 0' (13.6V) All-in-one pump and switch Extra long life heavy duty motor 1" NPS discharge with 1" AND 1 1/8" screw-on ports Three year warranty WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Rule-Mate 2000 GPH 24 Volt Fully Automated Bilge Pump The Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8". Rule-Mate Intelligence Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to "check" for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2" and shutting off at 5/8". 2000 GPH (7570 LPH) at 0' (27.2V) All-in-one pump and switch Extra long life heavy duty motor 1" NPS discharge with 1" AND 1 1/8" screw-on ports Three year warranty WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Side Mount Bracket for Newer 360-1100 GPH Rule Pumps The Rule Side Mount Bracket is made specifically for newer 360-1100 GPH Rule Pumps.

Oberdorfer N992 Gear Pump Peo Brz 3/8" Buna Pump housings and gears are made of top quality bronze, shafts are 303 stainless steel. Bearings are designed of high performance carbon-graphite material selected for wear resistance and long service life. Gear pumps are positive displacement pumps. Each shaft revolution displaces a definite amount of liquid  relatively unaffected by the back pressure in the discharge line. Shaft speed and flow are directly proportional. Recommended pressure limits are 100 PSI for water and non-lubricants, 150 PSI for oil and other lubricants. The maximum shaft speed is 1750 RPM. FEATURES Rugged Corrosion Resistant Bronze Construction Compact Close-Coupled Design Stainless Steel Shafts Durable Bronze Helical Gears Provide Quiet Operation Process Lubricated Carbon Graphite Bearings O-Ring Cover Seal For Maximum Leak Protection Lip Seal or Mechanical Seal Easy Field Assembly to a Variety of Motor Frames - For Typical DC Motor Pump Units - see N992 DC For Compact AC Motor Pump Units. See Close Coupled Bronze Adapterless Rotary Gear Pumps. For Danfoss Hydraulic Motor Driven Pump Units. See Adapter 9960 For Bonze Pedestal Pumps. See Model N2000 For Close-Coupled Ductile Iron Pumps - See Model C992 LIQUIDS & TEMPERATURES These pumps are suitable for all liquids that are compatible with bronze. Most common liquids are water, oil, and mild chemicals in the pH range of 4 to 11. Viscous liquids require reduced shaft speeds of 1150 RPM or lower. (Consult factory.) Liquids containing solids, abrasives, powders, or paint pigments are definitely not recommended for gear pumps. If abrasives are unavoidable, use a very low shaft speed. See price book for the recommended liquid temperature range of lip and mechanical seals. If more extreme temperature conditions exist, factory should be consulted. Freezing of water-filled pumps can cause damage and must be avoided. Oils at low temperatures are very viscous requiring a lower speed or extra power. SUCTION LIFT As a general rule, the suction lift should be kept at an absolute minimum by placing the pump as close to the liquid source as possible. A gear pump in new condition can lift 20 feet of water in the suction line. A foot valve (preferably with built-in strainer) is recommended at the beginning of the suction line. For a first startup, the pump should be primed to avoid dry running. Minimum size of the suction pipe is the size of the pump inlet port. For longer suction lines (over 3 feet) or for viscous liquids, the pipe should be at least one size or two sizes larger than the pump inlet port. If the discharge line contains any throttling devices such as a shut-off valve, a spray nozzle or other restrictive device, it is necessary to have a relief valve in the system, which returns the liquid to the suction side or to the tank. The relief valve is also available as part of the pump itself (R-model pumps). However, built-in relief valves are only good for intermittent service. If used continuously, the pump will overheat. A built-in relief valve is strictly a safety device against overpressure. It will not work successfully as a pressure or flow control device. For this purpose a separate relief valve in the pressure line must be used. Unless otherwise specified, the pump motor unit is supplied by the factory for shaft rotation counterclockwise from shaft end. Reversing motor will reverse “in and “out” ports and also requires changing relief valve location. The relief valve is always on the inlet side of this pump series. The factory pressure setting is 50 PSIG. To increase pressure, turn the relief valve adjusting screw in a clockwise direction.    

PWC 500 GPH Automatic Pump In the next generation sensing bilge pumps, the 500 GPH S-Series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8". Improved design and performance means that our new 500 GPH pump will produce this flow at just 12 volts rather than 13.6 volts as previously required, more typical of on board voltage supply. Our next generation of Rule pumps include check valves and to do this we've created a hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks. Rule has true electromagnetic suppression (EMC) and have a built-in thermal cell that protects the pump and the vessel when things get too hot. These are the smallest automatic pumps on the market. Features: Completely automatic with manual override; no float switch needed Submersible and ignition protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

360GPH Standard Bilge Pump - 12V Customers talk about flow, they want the water out of the bilge, and fast. Improved design and performance means that our next generation 360GPH pump will produce this flow at just 12V rather than 13.6V as previously required...more typical of on board voltage supply. Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it. We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot. We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting started Features: Non-automatic - used with a panel switch or Rule float switch Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

500GPH Standard Bilge Pump - 12V Customers talk about flow, they want the water out of the bilge, and fast. Improved design and performance means that our next generation 500GPH pump will produce this flow at just 12V rather than 13.6V as previously required...more typical of on board voltage supply. Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it. We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot. We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting started Features: Non-automatic - used with a panel switch or Rule float switch Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

800GPH Standard Bilge Pump - 12V Customers talk about flow, they want the water out of the bilge, and fast. Improved design and performance means that our next generation 800GPH pump will produce this flow at just 12V rather than 13.6V as previously required...more typical of on board voltage supply. Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it. We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot. We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting started Features: Non-automatic - used with a panel switch or Rule float switch Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.