PRO SERIES Pro Series offers the best values and one of the widest product lines in the towing market. A diverse selection of products including fifth wheel, gooseneck, weight distribution and receiver hitches, jacks, couplers, winches, trailer brake controls, trailer breakaway systems and cargo management items are a few of the items available from an extensive system of Dealers and installers throughout the U.S. and Canada.

Professional Series Battery Charger - 15A - 1-Bank - 12V The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit. Battery Charging System Designed for Use On Land and in Fresh and Salt Water The “Green” Charger: Totally “Repairable” Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE – Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof Features: Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater DeltaVolt® Intuitive Charging Technology Waterproof, dependable, rugged construction Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V – 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5' AC power cord = 3' Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410 May be used in many types of sporting applications including: Inland Watercraft Salt Water Watercraft Motorcycles Golf Carts Utility Vehicles… This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Professional Series Battery Charger - 30A - 2-15A-Banks- 12V/24V The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit. Battery Charging System Designed for Use On Land and in Fresh and Salt Water The “Green” Charger: Totally “Repairable” Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE – Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof Features: Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater DeltaVolt® Intuitive Charging Technology Waterproof, dependable, rugged construction Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V – 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5' AC power cord = 3' Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410 May be used in many types of sporting applications including: Inland Watercraft Salt Water Watercraft Motorcycles Golf Carts Utility Vehicles… This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Professional Series Battery Charger - 45A - 3-15A-Banks - 12V-36V The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit. Battery Charging System Designed for Use On Land and in Fresh and Salt Water The “Green” Charger: Totally “Repairable” Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE – Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof Features: Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater DeltaVolt® Intuitive Charging Technology Waterproof, dependable, rugged construction Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V – 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5' AC power cord = 3' Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410 May be used in many types of sporting applications including: Inland Watercraft Salt Water Watercraft Motorcycles Golf Carts Utility Vehicles… This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Professional Series Battery Charger - 60A - 4-15A-Banks - 12V-48V The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit. Battery Charging System Designed for Use On Land and in Fresh and Salt Water The “Green” Charger: Totally “Repairable” Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE – Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof Features: Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater DeltaVolt® Intuitive Charging Technology Waterproof, dependable, rugged construction Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V – 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5' AC power cord = 3' Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410 May be used in many types of sporting applications including: Inland Watercraft Salt Water Watercraft Motorcycles Golf Carts Utility Vehicles… This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Pro-Series Horizontal 1000H Windlass Kit - 12V Praised by professionals worldwide, the horizontal Pro-Series is a shining example of Lewmar's commitment to providing quality products for boats.  It's DIY-ready, easy to install, and housed in 100% 316 stainless steel, making it well protected and durable and with push-button control and a built-in manual emergency recovery system.  Anchoring has never been easier. Features: Powerful motor providing fast line speed Manual emergency recovery equipped  Convenient above-deck installation Technical Specifications: Material - Stainless Steel Maximum Pull - 1,000lbs Maximum Line Speed - 88'/min Maximum Chain Size - 5/16" Maximum Rope Size - 5/8" Power - 12 V Maximum Boat Length - 38' Mounting Position - Horizontal In the Box: Windlass Switch Circuit breaker Dual direction contactor/solenoid Instruction manual *Sold as an Individual 

Pro-Series Horizontal 700 Windlass - 12V Praised by professionals worldwide, the horizontal Pro-Series is a shining example of Lewmar's commitment to providing quality products for boats.  It's DIY-ready, easy to install, and housed in 100% 316 stainless steel, making it well protected and durable and with push-button control and a built-in manual emergency recovery system.  Anchoring has never been easier. Features: Powerful motor providing fast line speed Manual emergency recovery equipped  Convenient above-deck installation Technical Specifications: Material - Stainless Steel Maximum Pull - 700lbs Maximum Line Speed - 82'/min Maximum Chain Size - 1/4" Maximum Rope Size - 1/2" Power - 12 V Maximum Boat Length - 32' Mounting Position - Horizontal In the Box: Windlass Instruction manual *Sold as an Individual

Pro-Series Horizontal 700 Windlass Kit - 12V Praised by professionals worldwide, the horizontal Pro-Series is a shining example of Lewmar's commitment to providing quality products for boats. It's DIY-ready, easy to install, and housed in 100% 316 stainless steel, making it well protected and durable and with push-button control and a built-in manual emergency recovery system. Anchoring has never been easier. Features: Powerful motor providing fast line speed Manual emergency recovery equipped  Convenient above-deck installation Technical Specifications: Material - Stainless Steel Maximum Pull - 700lbs Maximum Line Speed - 82'/min Maximum Chain Size - 1/4" Maximum Rope Size - 1/2" Power - 12 V Maximum Boat Length - 32' Mounting Position - Horizontal In the Box: Windlass Switch Circuit breaker Dual direction contactor/solenoid Instruction manual *Sold as an Individual

2" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0 Black Oak LED's Marine Flush Mount Spreader Light is the perfect low profile mount for fiberglass T-Tops, gunwale mounting, and any other location where users need low-profile lighting with a huge output. This light uses 2 - 10w Cree LEDs, producing 1,560 lumens and throwing in a 90° pattern, which is perfect for lighting fore and aft decks as well as any area lighting that users may need. These lights are DuPont powder coated to make sure they can take sun and salt exposure and still look as great as the day they were purchased. All of Black Oak's lights have the highest IP rating available, IP69k, which means users don't have to worry about the location of these lights; they can take any amount of water thrown at them! Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Spreader light 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader Light Aft deck fishing lights Foredeck lights Accent lighting Game fishing lights Boat wake lights Technical Specifications: Total Wattage: 20W Amp. Draw: 1.4 LED Quantity: 2 Weight: 0.7 lbs. Raw Lumens: 1560 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Depth): 4-1/4" x 2-3/8" x 2-1/2”  Mounting Holes: 3-1/2” apart horizontally In the Box: 2” marine white spreader light Wiring pigtail  Stainless steel mounting kit *Sold as an Individual

60" Double Row LED Bar - Pro Series 2.0 - 5W Combo White The 60" Marine Curved was designed for serious fishermen who spend their nights on the water. Whether heading out early or returning late, this light bar will get you home safely. With a whopping 82,500 raw lumens, you're bound to light up everything in your path. If you know salt water, you know complete destruction of equipment from salt water corrosion. The Military grade breather and powder-coated water-proof design keep the LED Marine light bar series sealed with no risk of moisture leaking through. Features: A combination flood/spotlight pattern offers a superior lighting pattern Throw light over 2500m T-Top light for large center consoles, sportfish, yachts Off-road LED light bar Work light for construction sites Bari-coat ceramic coating for protection from UV, saltwater, and corrosion Hydrex 2 Stage gasket redundant waterproofing seal Dynamax housing to withstand the harshest beating possible Updated reflectors to produce a more efficient throw Pro Series brackets are 9GA thick 316 stainless Technical Specifications: Total Wattage: 600w Amp Draw: 21 Led Quantity: 120 Weight: 19.8lbs Raw Lumens: 82,500 Warranty: Lifetime IP Rating: IP69K Voltage: 9-36V DC In the Box: Light bar 10 AWG wire Lead Mounting brackets  *Sold as an Individual

PRO Series Inverters Performance inverters designed for RVs and boats Designed for RV and marine electrical systems that already have a battery charger or generator installed, Xantrex PRO Inverters deliver modified sine wave power for small appliances, TVs, and other onboard electronics from a battery bank. Description The Xantrex PRO Series Inverters are the perfect complement to generators when shore power is unavailable, to quietly and efficiently provide household power when needed. The PRO Series design is both user friendly and versatile. These inverters feature a detachable, digital remote control to display precise inverter, AC source and battery status information from one convenient location. A built-in transfer switch automatically detects when generator or shore power status changes to ensure power is always available. The 1000W is designed for demanding RV and marine conditions. They meet FCC Class B regulations to eliminate interference potential with other electronics, while UL 458 certification means they meet strict RV and marine safety standards. Versatile enough to be mounted either horizontally or vertically, these inverters can be easily installed to fit into any compartment. Conformal coated boards also minimize the chance of problems from moist operating conditions. Performance Features Inverter easily powers TVs, small appliances, and other electronics Built-in 15A circuit breaker to protect GFCI connected loads Up to 25A pass through for hardwired loads Digital remote control displays power output, AC source and battery voltage Detachable remote control can be mounted wherever convenient Conformal coated electronics provide moisture resistance Designed to be hard-wired using a terminal strip or by connecting AC through a GFCI receptacle (included) Protection Features Battery over-voltage and under-voltage protection Over temperature shutdown Automatic overload protection Short-circuit protection Ground fault protection WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

PRO Series Inverters Performance inverters designed for RVs and boats Designed for RV and marine electrical systems that already have a battery charger or generator installed, Xantrex PRO Inverters deliver modified sine wave power for small appliances, TVs, and other onboard electronics from a battery bank. Description The Xantrex PRO Series Inverters are the perfect complement to generators when shore power is unavailable, to quietly and efficiently provide household power when needed. The PRO Series design is both user friendly and versatile. These inverters feature a detachable, digital remote control to display precise inverter, AC source and battery status information from one convenient location. A built-in transfer switch automatically detects when generator or shore power status changes to ensure power is always available. The 1800W is designed for demanding RV and marine conditions. They meet FCC Class B regulations to eliminate interference potential with other electronics, while UL 458 certification means they meet strict RV and marine safety standards. Versatile enough to be mounted either horizontally or vertically, these inverters can be easily installed to fit into any compartment. Conformal coated boards also minimize the chance of problems from moist operating conditions. Performance Features Inverter easily powers TVs, small appliances, and other electronics Built-in 15A circuit breaker to protect GFCI connected loads Up to 25A pass through for hardwired loads Digital remote control displays power output, AC source and battery voltage Detachable remote control can be mounted wherever convenient Conformal coated electronics provide moisture resistance Designed to be hard-wired using a terminal strip or by connecting AC through a GFCI receptacle (included) Protection Features Battery over-voltage and under-voltage protection Over temperature shutdown Automatic overload protection Short-circuit protection Ground fault protection WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Oil Extractor 15L Capacity - Pro Series High capacity accommodates larger 4-stroke engines. The heavy duty construction makes this extractor perfect for shop use or the mobile service professional. Safe, no-Spark hand operation. Check valve for easy release of displaced air in container. Extra long 48" hoses with fittings included for almost any extraction application. Newly designed decompression valve to release negative pressure. See-through container for quick visual reference. Convenient foot board for added stability while in operation. Pour spout for no-mess fluid disposal. Suitable for engine oil, gear lube, brake fluid, coolant, water etc. Note: Not for use with Flammable or Corrosive products.

Oil Extractor 6.5L Capacity - Pro Series Mid-Size container for smaller jobs and tighter areas. The heavy duty construction makes this extractor perfect for shop use for the mobile service professional. Safe, no-Spark hand operation. Check valve for easy release of displaced air in container. Extra long 48" hoses with fittings included for almost any extraction application. Newly designed decompression valve to release negative pressure. See-through container for quick visual reference. Convenient foot board for added stability while in operation. Pour spout for no-mess fluid disposal. Suitable for engine oil, gear lube, brake fluid, coolant, water etc. Note: Not for use with Flammable or Corrosive products.

Oil Extractor 15L Capacity Pro Series with Pneumatic Fitting Easy to use for do-it-yourself applications, but heavy-duty construction will stand up for shop use or mobile service professionals. A built-in check valve allows easy release of displaced air and the decompression valve releases negative pressure. See-through container for quick reference and a built-in pour spout for no-mess disposal. 48" hoses with fittings included. Suitable for engine oil, gear lube, brake fluid, coolant, etc. Not for use with flammable or corrosive products. Can be operated manually or attached to a compressor and features a 40-170 psi working range and 1/4" air inlet.