|
MATE SERIES
Why cut two holes in your boat when one will do? Mate Series Combination Rod & Cup Holders function exactly like a standard cup holder and fishing rod holder combined. What this means is that a boat equipped with four cup holders and four rod holders would only need four Mate Series to do the same job. The result is a vessel with a less cluttered appearance that is easier to maintain.
|
|
|
Stainless Steel Backing Plate
For use with all Mate Series Rod and Cup Holders
|
16.44 |
|
|
LED Light Ring
Features:
Red, Green and Blue LED
Up to 16 Million Colors
Fits All Round Top Mate Series Combination Rod & Cup Holders
12V source Required
|
18.49 |
|
|
Stainless Steel Rod & Cup Holder Threaded Backing Plate
This threaded backing plate is designed to be used with ALL Mate Series Combination Rod and Cup Holders EXCEPT Elite Screw-less.
Features:
Cast 316L Stainless Steel
Access to the underside is NOT required
Machine screws included
|
16.44 |
|
|
M-Q2 Series Drive/Down Diffused Spreader Light - Single
The Q-Series PRO is designed and built to withstand the harshest working environments imaginable. Constructed of the toughest and most durable materials available, including a double-pass TIG-welded stainless steel bracket with vibration isolator, the Q-Series PRO provides reliable, powerful LED light and is tough enough to withstand mining, agriculture, construction, and the oil and gas industries. The rugged construction also makes it well suited to extreme environments. If the application is severe, the Q-Series PRO is the ultimate lighting solution.
RIGID’s Q-Series PRO lights are also available with a durable white finish. Though suitable for marine applications, RIGID’s white lighting products are perfect for use anywhere an alternative to black is desired. The distinctive white is a durable UV-resistant powder coated finish with an additional chromate conversion coating for superior corrosion resistance. They feature the same legendary lighting technology and superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.
Features:
GORE® Pressure Equalizing Vent
Unbreakable Polycarbonate Lens
Durable UV 3800 Polyester Powdercoat
IP68 Certified
MIL810-STDG Vibration Certified
ROHS Compliant
Over/Under Voltage Protection
Operating Temp -40º F +145º F
Sealed Deutsch Connector
50,000+ Hour Lifespan
Electrically Protected Against RFI/EMC Interference
Integrated Thermal Management System
Specifications:
Watts: 195
Amp Draw: 13.9
LED's: 24
Raw Lumens: 19008
Lux @ 10m: 445.87
Beam Distance: 211.2 m
Peak Beam Intensity: 44,587 cd
|
540.00 |
|
|
A/M-24 Series All Clear Automatic/Manual Inflatable Life Jacket - Grey - Adult
The Onyx A/M-24 Series All Clear Automatic/Manual Inflatable Life Jacket's low profile design provides you with comfort on the water while also keeping you safe and giving you peace of mind.
Features:
Convertible to Manual Only inflation mode (pull-cord and oral inflator tube)
All-Clear viewing window for an at-a glance look to make sure the vest is properly armed and ready to use (Green indicates you are properly armed, while Red shows you need to re-arm)
Lightweight low-profile design
Soft extended neoprene neckline for all day comfort
Quickburst® zipper for easier repacking
Inflation handle clips to life jacket to prevent snags
Durable nylon oxford fabric outer cover resists tears and punctures
Reflective material for increased visibility
Supplied with owner's manual and "Think Safe" booklet
Technical Specifications:
Chest Size - 30"-65"
Material - Nylon ripstop and oxford fabrics
|
184.74 |
|
|
A/M-24 Series All Clear Automatic/Manual Inflatable Life Jacket - Black/Red - Adult
The Onyx A/M-24 Series All Clear Automatic/Manual Inflatable Life Jacket's low profile design provides you with comfort on the water while also keeping you safe and giving you peace of mind.
Features:
Convertible to Manual Only inflation mode (pull-cord and oral inflator tube)
All-Clear viewing window for an at-a glance look to make sure the vest is properly armed and ready to use (Green indicates you are properly armed, while Red shows you need to re-arm)
Lightweight low-profile design
Soft extended neoprene neckline for all day comfort
Quickburst® zipper for easier repacking
Inflation handle clips to life jacket to prevent snags
Durable nylon oxford fabric outer cover resists tears and punctures
Reflective material for increased visibility
Supplied with owner's manual and "Think Safe" booklet
Technical Specifications:
Chest Size - 30"-65"
Material - Nylon ripstop and oxford fabrics
|
167.99 |
|
|
Harness Extension 1M f/E/M/SR Series
This Add-a-Light Extension gives you an additional 1 meter of length to allow for more versatility and installation options. It features 16 AWG wire and a Deutsch connector. This harness extension is designed to be used with E-Series or SR-Series light bars that are 20" or longer.
Features:
16 AWG Wire
Deutsch Connector
Inline Fuse Holder
|
33.74 |
|
|
Replacement Power & Data Cable for XB & WatchMate Series - 6'
Replacement power cable (2M/6.5') for Vesper XB and WatchMate series AIS transponders, receivers, or displays.
|
26.99 |
|
|
Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow.
Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available.
All-new sleek, modern design.
First all modular system - extremely versatile.
Easy to select and install for any radar, dome, light or camera combination.
Easy to add accessories.
Upgradable for future additions and modifications.
Powder coated aluminum construction
Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer.
The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."
See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )
Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.
SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686
|
|
|
Charge Mate 2502
A secondary battery is becoming increasingly common. As a second battery can prevent the main battery from depleting and being unable to start, this seems like a safe and reliable solution.
The second battery, however, also has to be charged regularly. The Charge Mate series connects both batteries during charging and keeps them isolated when discharging.
The Charge Mate 1202 and 2502 are especially practical for small systems.
General Specifications:
Battery voltage: 12/24V
Max. current: 500 A
Number of modes: On, off, auto, start to assist
Dimensions, hxwxd: 90 x 80 x 85 mm/3.5 x 3.1 x 3.3 inch
Weight: 0.65 kg/1.4 lb
Compliance: CE
Technical Specifications:
Power consumption: switch open: < 1 mA at 12/24 V DC
Inrush current (250 ms): 2000 A
Switch on voltage: 13-15 V (12 V) / 26-30 V (24 V)
Switch on delay: 30 sec
Switch off voltage: < 12.25 V... > 15 (12 V) / < 25.5... > 30 V (24 V)
Switch off delay: 3 minutes
Relay: Electro-mechanical
Temperature range (ambient temp.): -40 °C to 60 °C/-40 °F to 140 °F
Protection degree: IP21
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
336.02 |
|
|
Charge Mate 1202
A secondary battery is becoming increasingly common. As a second battery can prevent the main battery from depleting and being unable to start, this seems like a safe and reliable solution.
The second battery, however, also has to be charged regularly. The Charge Mate series connects both batteries during charging and keeps them isolated when discharging.
The Charge Mate 1202 and 2502 are especially practical for small systems.
General Specifications:
Battery voltage: 12/24 V
Max. current: 120 A
Dimensions, hxwxd: 76 x 46 x 46 mm/3.0 x 1.8 x 1.8 inch
Weight: 0.125 kg/0.3 lb
Compliance: CE
Technical Specifications:
Power consumption: Switch open: < 1 mA at 12/24 V DC
Inrush current (250 ms): 2000 A
Switch on voltage: 13-15 V (12 V) / 26-30 V (24 V)
Switch on delay: 5 sec
Switch off voltage: < 12.75 V (12 V) / < 25.5 V (24 V)
Switch off delay: No
Relay: Electro-mechanical
Temperature range (ambient temp.): -40 °C to 65 °C/-40 °F to 149 °F
Protection degree: IP21
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
159.17 |
|
|
Cup Holder - 316 Stainless Steel
Features:
Stainless Steel Cup Holder @3.25ID
Matches our ELITE Series Rod & Cup Holders
Cutout Diameter: ø3.5”
Flange Diameter: 4.75″
Ø1/2 Drain Barb
Adhesive Tape / Gasket Installation – Included
316L Stainless Steel
|
37.81 |
|
|
3′ Flag Pole for Rod Holders/ Rocket Launchers.
The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.
|
49.32 |
|
|
3′ Flag Pole with USA Flag for Rod Holders/ Rocket Launchers.
USA Flag included, along with pole.
The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.
|
52.61 |
|