|
Sherwood- Engine Cooling Pump
More Info: F85 F-85, Westerbeke Pilot 10-20 16423, The F-85 pump is no longer available directly from Sherwood so we use a G-65 pump and two bushings to reduce the port size to 1/2".
FEATURES
Pump Body:
Bronze
Ports:
1/2" NPT, (Bushed down from 3/4")
Cam:
Full
Impeller:
Neoprene
Shaft Seal:
Lip Type
Drive:
Flange Mounted to Engine.
APPLICATIONS / CHARACTERISTICS
Flexible Impeller Engine Cooling Pump.
|
921.53 |
|
|
Flojet Marine Pumps & Accessories
Flojet is the leading manufacturer of marine pumps and accessories. With over 20 years experience in pump design and manufacturing, Flojet is committed to providing quality products for your boating needs.
Quad Water System Pumps
Self-priming diaphragm pump with built-in pressure switch that automatically starts and stops pump when discharge valve opens and closes. The compact design and plug-in port fittings make installation easy.
The RV Macerator Pump
Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.
Specials Closeouts Remanufactured Rebates
|
|
|
Marine Pumps & Accessories
Flojet is the leading manufacturer of marine pumps and accessories. With over 20 years experience in pump design and manufacturing, Flojet is committed to providing quality products for your boating needs.
Quad Water System Pumps
Self-priming diaphragm pump with built-in pressure switch that automatically starts and stops pump when discharge valve opens and closes. The compact design and plug-in port fittings make installation easy.
The RV Macerator Pump
Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.
Specials Closeouts Remanufactured Rebates
|
|
|
Marine Pumps & Accessories
Flojet is the leading manufacturer of marine pumps and accessories. With over 20 years experience in pump design and manufacturing, Flojet is committed to providing quality products for your boating needs.
Quad Water System Pumps
Self-priming diaphragm pump with built-in pressure switch that automatically starts and stops pump when discharge valve opens and closes. The compact design and plug-in port fittings make installation easy.
The RV Macerator Pump
Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.
Specials Closeouts Remanufactured Rebates
|
|
|
No matter whether you are an experienced boater looking for a replacement pump or a manufacturer specifying pumps for your marine application, we are prepared to provide you with the support you need. And no matter where you work or live, access to our products, services, spare parts and support are never far away. In fact, you will find SPX FLOW's Johnson Pump marine brand represented in every major industrial country of the world today and in more than sixty nations altogether.
SHOP JOHNSON PUMP
The Aqua Jet five chamber diaphragm pump provides the perfect water pressure or deck wash solution for both small and medium sized leisure and commercial boats as well as mobile homes, campers and summer homes.
Quiet and pulsation-free even at low speeds. Efficient and compact, Aqua Jet pumps are particularly suitable where low amperage and sound levels in relation to water flow are placed at a premium-such as in shower and galley applications. Integrated pressure switch turns pump on and off automatically when tap is opened and closed. Operates in fresh or sea water.
SHOP THE Aqua Jet five chamber diaphragm pump
Specials Closeouts Remanufactured Rebates
|
|
|
RV Macerator Pump
Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump, you can not only empty the black and grey water tanks at the conventional Dump Station but also down a toilet, into your house sewer clean-out, septic tank, or into a mobile waste wagon.
The Flojet macerator pump will empty a typical 30-gallon holding tank in less than three minutes. The time increases somewhat as the distance pumped is increased beyond 25'. The pump will macerate and pump all waste and tissue normally found in RV waste systems. The same high-quality Jabsco design is found in boat stores worldwide. Put an end to handling and rinsing a dirty 3" sewer hose; instead use a cleaner, easier to handle garden hose. Now you can pump uphill, and around corners. The RV waste pump will simplify and improve your RV experience!
Features:
A neat and clean way to quickly evacuate waste tanks
Empty black-water and greywater Holding Tanks at home
Grinds waste as it pumps
Built-in Impeller Protection Device...longer life!
The flow of up to 13 GPM for fast, clean Holding Tank evacuation
Easy to Install
Because it is self-priming, it may be located up to four feet above the tank liquid level. The intake port is designed to accept a 3" ID slip-on hose and the discharge port will accept a 1" ID hose. When installed, the macerator can be used to empty the holding tank into any convenient sewer receiver such as a sewer clean-out at your home.
Applications
Empty holding tanks and avoid dump stations
Transfer waste from recirculating toilets to main holding tank
Impeller Release Feature
After long periods of non-use, a stuck impeller can be easily broken loose with a screwdriver inserted in motor shaft slot. Simply turn shaft clockwise as shown.
Specifications:
Pump: Self-Priming Flexible Impeller with Stainless Steel Wearplate
Impeller: "Jabsco Nitrile" compound
Macerator: Stainless Steel Cutter reduces particle size to 1/8" (3mm) maximum
Seal: Lip Type
Ports: Inlet RV model - 3" (76mm) hose
Outlet - 1" (19mm) Hose Barb
Motor: Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft Includes Impeller Protection Device that shuts-off pump after 20 seconds of run-dry
Complies with USCG Regulation 183.410 & ISO 8846 MARINE for Ignition Protection
Weight: 3.5lb (1.6 kg) Approx.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
235.19 |
|
|
Flojet D3131H5011A Pump 12V 1.6/60 Pss Sw
Flojet D3131H5011A Duplex Diaphragm Pump - 60 PSI, 1.6 GPM, 12 VDC
Electric Pump
The Flojet D3131H5011A is a double diaphragm pump that includes an integrated 12 VDC electric motor. Pump body is made from polypropylene for corrosion and chemical resistance. Ability to self-prime and handles waterlike and viscous liquids. Incorporates EPDM valves and a Santoprene diaphragm.
Specifications:
Inlet/Outlet: 3/8 in FNPT
Max. Flow: 1.6 GPM
Max. Pressure - Switch: 60 PSI
Voltage - Pumps: 12V DC
Housing Material - Pumps: Polypropylene
Diaphragm Material: Santoprene
Valves: EPDM
|
172.13 |
|
|
Flojet 01740-003S Strainer 3/8" Barb X 3/8" Barb
Flojet Strainer with 3/8” Hose Barb Inlet and 3/8” Hose Barb Outlet, In-Line Design, Fine 40 Mesh Stainless Steel Screen
Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water.
Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.
Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications.
Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.
Maximum Flow Rates:
With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM)
With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM)
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)
Maximum Water Temperature: 160F (70C)
Maximum Pressure: 70 PSI (5 bar)
The Strainers that are Equiped with a "Direct Plug-In Quad Port" will fit into the Snap-In Quad Ports on Flojet Diaphragm Pumps and Jabsco Diaphragm Pumps sized under 6 GPM.
|
28.55 |
|
|
Flojet LF112421F Pump 12V On-Demand 40Psi
Flojet Industrial LF Pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling a broad range of chemicals. The LF series of diaphragm pumps are selfpriming and can be run dry without harm. They are intended for intermittent duty cycles but can be run continuously for short periods of time. Typical pump uses are liquid transfer, spraying, circulation, filtration and dispensing.
Duplex Diaphragm Pump with Fin Cooled Motor
Compact pump design
Sealed pressure switch automatically starts and stops pump when discharge valve is opened and closed
Selfpriming and can operate dry without damage
Sealed motor or with protective metal cooling finned cover
Integral 5 amp inline fuse with cover
|
101.30 |
|
|
Flojet 01740-950S Strainer 90' Quad X Quad
This Flojet 01740-950S strainer keeps debris out of your pump. Its 40 mesh screen is typically used for potable / drinking water applications. The strainer body is made of polypropylene with a clear cap and Buna-N o-rings. It has a 90 degree elbow design.
The strainer has a direct plug-in quad port outlet and female quad port inlet. You can use any standard snap-in quad port fitting for the inlet side. It will fit into the snap-in quad ports on Flojet diaphragm pumps under 6 GPM.
Materials are FDA approved
Easy-to-clean plastic bowl
Fine 40 mesh stainless steel screen
Ports: Quad Female to Quad Male
Set at 90 degrees from inlet to outlet
|
28.55 |
|
|
Flojet 04524-500A Pump 115V S/E 4.5Gpm 45Psi
Flojet- Diaphragm Pump Quad, Water Pressure System, VSD, 115V, Automatic Variable Speed for Constant 45PSI Pressure at Up To 5GPM, Santoprene Diaphragm, EPDM Valves, No Accumulator Tank Required, Includes Power Cord and 10/13mm (1/2") Hose Barb Snap-In Port Fittings
Features:
4524 Series AC Quad Pump with VSD Module The AC Variable Speed Drive constant pressure pump system matches motor speed to system demand. As more liquid is needed, the motor responds to increase flow. Conversely, as the demand lessens, the motor slows to a "super quiet" speed, always retaining a constant system pressure. The result is exceptionally stable flow and reduced apm draw. The Flojet AC VSD sensorcontrolled pumps provide stable, constantpressure operation on any AC application. Operation from no flow to maximum flow is proportionally controlled, eliminating unwanted pump switch cycling and the need for an accumulator tank. Model No. 4524 Series AC Quad VSD • Maintains steady fluid pressure in response to variable flow demand • No pressure switch • Conserves energy, low amp draw • Quiet running under normal use • Automatically adjusts motor speed to maintain pressure • Improves overall system performance • Eliminates bulky accumulator tank for limited SPACErequirements
|
481.51 |
|
|
Flojet 20381-007 Kit Port Garden Hose (Pair)
Quad Port Garden Hose Adapter
Use with all Triplex, Quad and G57 Flojet pumps
Comes packaged with two per bag
Straight connector for garden hose
|
6.03 |
|
|
Flojet 20466-007 Kit Diaphragm N5100 Santo
Flojet 20466007 Diaphragm Repair Kit For N5100040B Pump
Diaphragm Repair Kit for N5100040B Pump
This Flojet 20466007 santoprene diaphragm kit includes pistons. It is designed to repair your Flojet N5100040B pump. See Related Products for other items from the Flojet 5100 Series.
Replacement diaphragm
Santoprene
Includes pistons
|
23.65 |
|
|
Flojet 04300-525A 115V 3.3Gpm S/V Sw45
Flojet 04300525A Electric Quad Series Diaphragm Pump With 6 Ft. Cord - 5 GPM, 35 PSI, 115VAC
Polypropylene Pump & Motor Assembly
The Flojet 04300525A pump is part of the Flojet 4300 Quad Series. This versatile pump cam be used for car wash services, water treatment, filtering, and more. It is made with chemical resistant materials including a Polypropylene body, a Viton check valve, and a Santoprene diaphragm.
The Flojet 04300525A pump includes 3/4" snap-in hose barb style ports and a 6' power cord. It has a 35 PSI maximum pressure rating and a flow rate of 5 GPM. Quiet, smooth, and safe operation!
Specifications and Benefits:
5 GPM
35 PSI
115 volt AC
3/4" hose barb inlet
3/4" hose barb outlet
Polypropylene housing
Viton check valve
Santoprene diaphragm
6' power cord
Snap-in ports for easy installation
130° Fahrenheit maximum fluid temperature
Built-in pressure switch automatically starts and stops
Can run dry without damage
Excellent self-priming capability (up to 8 feet vertical)
Powerful magnet motor with low current draw
4 piston design delivers high flow rates
Handles water-like and viscous liquids up to 250 cP
CE Certified
|
327.51 |
|
|
Flojet 04300-529A Mpu 115V S/V 3C Sw40
Flojet 04300529A Electric Quad Series Diaphragm Pump With 6 Ft. Cord - 3.5 GPM, 35 PSI, 115VAC
Polypropylene Pump & Motor Assembly
The Flojet 04300529A pump is part of the Flojet 4300 Quad Series. This versatile pump cam be used for low-pressure car wash services, water treatment, filtering, and more. It is made with chemical resistant materials including a Polypropylene body, a Viton check valve, and a Santoprene diaphragm.
The Flojet 04300529A pump includes 1/2" snap-in hose barb style ports and a 6' power cord. It has a 35 PSI maximum pressure rating and a flow rate of 3.5 GPM. Quiet, smooth, and safe operation!
Specifications and Benefits:
3.5 GPM
35 PSI
115 volt AC
1.8A maximum amps
Continuous duty induction motor
1/2" hose barb inlet
1/2" hose barb outlet
Polypropylene housing
Viton check valve
Santoprene diaphragm
6' power cord
Snap-in ports for easy installation
130° Fahrenheit maximum fluid temperature
Can run dry without damage
Excellent self-priming capability (up to 8 feet vertical)
Powerful magnet motor with low current draw
4 piston design delivers high flow rates
Handles water-like and viscous liquids up to 250 cP
CE Certified
|
685.71 |
|