|
Cowl Ventilator
Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised water barrier. Plastic vents are corrosion-resistant, will not discolor. All collector boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross sectional area requirements.
For use with 3" I.D. wire-supported ventilation hose. Features flexible hose flange that is screwed onto hose, then vent snaps onto the flange. Vent constructed of chrome-plated die-cast Perma-Plate® ZAMAK. Flange is non-corrosive plastic. Installs with #8 screws.
Installation Hole Size: 3-1/4" to 3-1/2"
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.49 |
|
|
Cowl Ventilator
(0870)
Chrome Plated Zinc Alloy Cowl with Black PERKO-KOTE Base
3" Duct Thread into Neck, Hose Clamps Not Required
Cowl Opening Square: 7-1/3"
|
37.43 |
|
|
Cowl Ventilator
(1312)
Chrome Plated Zinc Alloy Cowl w/ Black Plastic Base
3" Duct Threads Into Neck, Hose Clamps Not Required
Length: 5-3/4"
Width: 4-3/8"
Height: 2-5/8"
|
30.77 |
|
|
Stainless Steel Cowl Vent with Base - 3" Hose
Cowl Vent with Base provides fresh air below decks by trapping air that comes across the top deck and forcing it into your boat's cabin or interior. Stamped 304 stainless steel construction with black plastic base. Designed for use with 3” ventilation hose. Installs with four #8 or #10 FH fasteners (not included).
|
39.04 |
|
|
2018 Jeep Wrangler JL Cowl Mount Tall Standoff Kit
Compliment your RIGID Jeep Wrangler JL Cowl mount with the tall standoff mounting option for adding a 2nd pair of lights. Used in combination with Wrangler JL Cowl Mount P/N 41656.
These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL.
Lights sold separately.
In the Box:
All Necessary Hardware
∗ Sold as a Pair
|
68.48 |
|
|
2018 Jeep Wrangler JL Cowl Mount f/2 D-Series
The Jeep Wrangler is one of the most versatile off-road vehicles ever created and when traveling off the beaten path lighting has never been more important. Enter the RIGID Cowl Mount for the 2018 Jeep Wrangler JL.
This mount has the ability to support not one, but two lighting options from the RIGID D-Series family all while allowing the Jeeps windshield to fold if desired.
These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL.
Lights sold separately.
In the Box:
All necessary hardware
∗ Sold as a Pair
|
232.10 |
|
|
2018 Jeep Wrangler JL Cowl Mount Short Standoff Kit
Compliment your RIGID Jeep Wrangler JL Cowl mount with the short standoff mounting option for adding a 2nd pair of lights.
These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL.
Lights sold separately.
In the Box:
All Necessary Hardware
∗ Sold as a Pair
|
59.69 |
|
|
Stainless Steel Cowl Vent
Cowl Vent provides fresh air below decks by trapping air that comes across the top deck and forcing it into your boat's cabin or interior. Stamped 304 stainless steel construction. Installs with four #8 FH fasteners (not included).
|
37.90 |
|
|
Closable Deck Ventilator Type
The UFO2 is a high-gloss polished deck ventilator with an integral mushroom ventilator that can be made watertight. When opened, it ensures ventilation and is rain- or splash-proof.
Specifications:
Material: Stainless steel
Hose Connection Diameter (mm): N/a
Free Flow Area cm²: 30
Sort Ventilator: 0
|
118.80 |
|
|
Turbo 4000 Series II In-Line Blower
Part #: 1749-4
Attwood's improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.
Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads.
Features:
Nickel-plated motor can for corrosion resistance
Stiffening ribs to reduce housing distortion
Motor cap to seal wires and motor for water resistance
Five-blade fan maximize airflow and efficiency
Tabs in intake and exhaust hold ventilation hose/clamp firmly in place
Low amp draw motor for longer blower and battery life
Built-in mounting feet allow easy vertical or horizontal install
3-Year Warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
29.63 |
|
|
NT-Evolution Security Hard Wired Package with OB Cowling Sensor
GOST gives users the power to know the location of the boat and whether it's safe, secure, and ready to enjoy. Affordable, easy to install, and simple to use, GOST is the perfect solution for connecting boaters with the vessel.
Features:
Top-of-the-line, globally capable wired security, monitoring, and satellite tracking system designed specifically for harsh marine environments
Real-time GPS location tracking
GOST IDP 100x message size capacity
What's Included
DOOR / HATCH / ENG. COWLING | GDC - EXT - WGHD
Is the GOST standard door and hatch contact used inside the vessel? It is also used for engine cowlings.
Beam Sensor | GNT IBS 1
Is an infrared beam sensor designed to protect the exterior perimeter of the vessel. When the beam between the emitter and receiver is broken, the siren will alarm.
High Water Sensor| GMM HWS
Includes the bracket and the float switch that will be installed in the bilge of the vessel slightly below the vessel factory-installed high water sensor.
Remote Keyfob | GMM KF2
Compact water-resistant design with a backlight for buttons and auditory feedback for arming or disarming a security system. The keyfob performs up to 6 actions per remote control, with a range of up to 150 feet.
Water Resistant Strobe | GA STROBE WHITE
Ultra small, self-contained semi-hemispheric white LED lights Surface or internal mount featuring 25 scan lock flash patterns, including synchronize feature for alternating or synchronous flashing.
Mini Siren | GA-MINI-SIREN
GOST Acoustics mini water-resistant, super-loud multi-tone marine siren, 125 db, 20 watt.
Wired Sensors | Zone
Hatch | Z2 (NC)
Beam-Seansor | Z3 (NC)
Engine Cowling | Z4 (NC)
High Water | Z5 (NO)
ComBUS | Four-Wire
|
4124.99 |
|
|
LED 3-Mile Transom Light
Part #: 6556-7
For pleasure craft up to 164 ft. (50m) in length, Attwood offers one of the first 3NM LED transom navigational lights. Creating 135 degrees of light at 3NM of visibility, Attwood's proprietary optics design focuses the light aft, keeping the operator in a "shadow". A truly unique design, Attwood's transom light includes a luxurious electropolished stainless cover that is both durable and great looking. Attwood wraps it all together with an easy to install, "surface mount" design that utilizes a snap feature to eliminate exposed fasteners. 3 inch diameter.
1.5 watts at 12 VDC, compatible with both Attwood and Perko mounting holes. Lights are rated for 50,000+ hours of use and feature a 10 year warranty.
Features:
Stainless Steel
1.5W at 12VDC
135 degrees
3nm
10-Year Warranty
|
57.65 |
|
|
LED Docking Lights - Stainless Steel - White LED - Pair
Compared to its 55-watt halogen competition, the Attwood Surface Mount LED Docking Light draws a fraction of the power while producing a brighter output. The Attwood product also transmits light in a much broader pattern as opposed to a narrow beam generated by today’s competitors. Simply put, Attwood’s docking light performs like a true “docking light” instead of a narrow-beam headlight.
Power draw and performance are important, but what about assembly? At 1.2" thick, the lights are designed to be mounted directly to the surface of the hull. With only a small hole for wiring and three (3) screws for attachment, Attwood’s surface mount design makes installation quick and ncomplicated. This new LED Docking Light allows for fewer hull cuts and minimal intrusion while producing results that are reliable and attractive.
Backed by a 10-year warranty, Attwood’s LED Docking Light is designed and tested for extreme conditions. Attwood used only the highest grade Stainless Steel and aluminum components to ensure the product is resistant to corrosion. The rubber gasket provided creates a barrier that protects your hull from water entry, ensures the light is watertight and keeps all electrical components fully sealed.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
134.71 |
|
|
Yamaha Fuel Line Kit 6' x 3/8"
Attwood's low-permeation fuel line kits set the standard in performance, safety, and value. Along with featuring Attwood's award-winning Universal Sprayless Connector, these kits meet strict United States EPA regulations. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.
Features:
Includes Attwood's award-winning Universal Sprayless Connector; no more dangerous fuel sprays when connecting and disconnecting pressurized lines
Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
Includes 3/8-inch low-permeation fuel hose that resists kinking and hardening; rated up to 100 degrees Centigrade
Versatile: compatible with Ethanol blended fuels, Yamaha Brand engines and tanks
Attwood products are both compatible and reliable, engineered and built with a never-fail attitude
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.14 |
|
|
Replacement Cartridge for Tsunami 1200 MK2
1200 GPH Replacement Attwood Tsunami motor cartridge. For use with Attwood Tsunami MK2 (56 series) Bilge and Aerator pumps. Attwood Tsunami MK2 motor cartridge eliminates air locks.
Features:
1200 GPH Replacement Attwood Tsunami motor cartridge
For use with Attwood Tsunami MK2 (56 series) Bilge and Aerator pump
Attwood Tsunami MK2 motor cartridge eliminates air locks
|
32.52 |
|