Buss Bar with Cover - 6 Terminals This bus bar is designed for positive or negative DC distribution or collection of AC neutral or safety ground circuits. Constructed of corrosion-resistant tin-plated Copper and ABS with a polycarbonate cover. Features: Includes two 5/16"-18 stainless steel stud terminals and six #10-32 stainless steel screw terminals Installs with four #8 FH fasteners (included) 48VDC, 300A; 300VAC, 300A maximum CE and RoHS compliant Specifications: Terminals: 6 Length (inch): 5-1/2" Width (inch): 2-3/4" Depth (inch): 1-11/16" Max. Amps: 300 Fastener: #8 FH Weight: 0.68 lb.

Dual Buss Bar with Cover - 12 Terminals This dual bus bar is designed for DC positive or negative distribution on one block or AC neutral and safety ground collection on one block. Constructed of corrosion-resistant tin-plated Copper and ABS with a polycarbonate cover. Features: Includes two 1/4"-20 stainless steel stud terminals and six #8-32 stainless steel screw terminals per buss Installs with four #8 FH fasteners (included) 48VDC, 150A per buss; 300VAC, 150A per buss CE and RoHS compliant Specifications: Terminals: 12 Length (inch): 5-1/2" Width (inch): 2-3/4" Depth (inch): 1-11/16" Max. Amps: 150 Fastener: #8 FH Weight: 0.59 lb.

5028 ST Blade Fuse Block w/ Cover 6 Circuit w/out Negative Bus Clear insulating cover with label recesses accept Small Format Labels Cover Satisfies ABYC/USCG requirements for insulation Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit Accepts ATO and ATC fast acting blade fuses 20 write-on circuit labels included WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2356100 - Water Resistant 100A Busbar with Cover Water-resistant bussing for harsh environments.  Built with wing screws for toolless access. Features: Accepts a wide range of wire sizes Includes 3 wire plugs to maintain a water-resistant rating if less than 4 wires are used Nests with other water-resistant 100A common busbars and ST-Blade water resistant fuse block for space-saving wiring Ideal for positive distribution and for the collection of negative or AC ground circuits Meets ABYC/USCG insulation requirements Tin-plated copper busses and fuse clips Includes four (4) write-on circuit labels Small format standard and custom labels are available Wing-screws designed for tool-free installation of cover to meet ABYC compliance Technical Specifications: Cover - yes Maximum Voltage - 300V AC - 48V DC Terminal Stud - 1 x #10-32 Continuous Rating - 100A AC or DC Bus Material - Tin-plated Copper Mounting Holes - Accepts 1/4" (6mm) screws Terminal Screws - 4 x # 8-32 Wire Size - Input - (1) 8 AWG to 4 AWG  Wire Size - Load - (4) 16 AWG to 10 AWG  In the Box: 2356100 Busbar Instruction Manual *Sold as an Individual 

Kayak Hatch Cover - VCP Oval The VCP Oval Hatch Cover is a great replacement for lost or damaged lids. This performance hatch features Sea-Dog's unique two-part construction for maximum protection. Designed to float when dropped in the water, the hatch lids are easy to attach while still offering a superior watertight seal. This Sea-Dog VCP Oval Hatch Cover is compatible with the Valley Canoe Products® (VCP) oval hatch when mounted on an injection-molded rim bolted/glued to the deck; it is not recommended for rotomolded kayaks that do not feature this rim. *Sea-Dog® is not affiliated with Valley Sea Kayaks® and/or Kayak Sport®; reference to these brands only indicates similar sizing of hatch cover products. Features: Proudly constructed in the USA of injection molded nylon and polypropylene Lid only Specifications: Diameter: 17-1/4 in. Style: Performance  Weight: 1.30 lb.

Kayak Hatch Cover - 8" - VCP Oval The VCP Oval Hatch Cover is a great replacement for lost or damaged lids. This performance hatch features Sea-Dog's unique two-part construction for maximum protection. Designed to float when dropped in the water, the hatch lids are easy to attach while still offering a superior watertight seal. This Sea-Dog VCP Oval Hatch Cover is compatible with the Valley Canoe Products® (VCP) oval hatch when mounted on an injection-molded rim bolted/glued to the deck; it is not recommended for rotomolded kayaks that do not feature this rim. *Sea-Dog® is not affiliated with Valley Sea Kayaks® and/or Kayak Sport®; reference to these brands only indicates similar sizing of hatch cover products. Features: Proudly constructed in the USA of injection molded nylon and polypropylene Lid only Specifications: Diameter: 8 in. Style: Performance Weight: 0.55 lb.

Sink Drain with Strainer for 2" Openings - 5/8" Barb Sea-Dog® Sink Drain with Strainer has a 5/8 inch barb on the drain and is for 2-inch openings. Specifications: Style (inch): Straight 2" Weight (lb): 0.48 lb. Package Quantity: One

Boat Hook Mooring Cover Support Crown  Constructed of UV resistant injection molded nylon this crown fits the tip of an adjustable boat hook, or any universal threaded device, to support a mooring cover or canvas top. The unique configuration has strap or line attachment details designed to secure the support crown in the correct location eliminating problems caused by water pooling from rain, sleet or snow. Combine any Sea-Dog® Boat Hook with the Support Crown 491110-1 and mooring cover support crown straps 491115-1 for the perfect solution to nature's pooling pressures. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Boat Hook Mooring Cover Support Plate Crown & Webbing Straps Combine a Sea-Dog Boat Hook with the Support Crown and mooring cover support crown straps (#491115-1) for the perfect solution to nature's pooling pressures. Boat Hook Mooring Cover Support Plate Crown Features: Fits the tip of an adjustable boat hook (or any universal threaded device) to support a mooring cover or canvas top Helps eliminate pooling from rain, sleet or snow UV resistant injection molded nylon construction Webbing Straps These Mooring Cover Support Crown Webbing Straps are used for positioning the Mooring Cover Support Crown (491110-1) securely in place. Includes three 15' straps, with a securing loop on one end and an adjustable snap clip on the other. They are designed to set once and then simply clip in and out later for ease of use.

ST Blade Fuse Block With Cover - 6 Circuit without Negative Bus Part# 5035 Can be used for 24-hour circuits Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems' Small Format Labels for circuit identification Fuse blocks with covers include 20 write-on circuit labels Tin-plated copper buses and fuse clips Accepts ring or spade type terminals Accepts ATO® and ATC® fast acting blade fuses Fuses sold separately WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

5025 ST Blade Fuse Block with Cover - 6 Circuit with Negative Bus  Features: Clear insulating cover with label recesses accept Small Format Labels Cover Satisfies ABYC/USCG requirements for insulation Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit Accepts ATO and ATC fast acting blade fuses 20 write-on circuit labels included WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Blade Style LED Indicator Fuse Block with Negative Bus Bar - 6 Circuit Nickel Plated Copper/Stainless Steel/Injection Molded ABS. Features: Red LED lights indicate when fuse is blown or missing Uses ATO/ATC & ATM fuses 1A-30A Main line terminal rating is 100A 32VDC max, with M5 metric threaded studs Single line terminal rating is 30A 32VDC max, with M4 metric threaded studs Includes semi-transparent cover and 71 labels Terminals are nickel plated copper with stainless steel screws Installs with four #8 FH fasteners (not included) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Blade Style LED Indicator Fuse Block with Negative Bus Bar - 12 Circuit Nickel Plated Copper/Stainless Steel/Injection Molded ABS. Features: Red LED lights indicate when fuse is blown or missing Uses ATO/ATC & ATM fuses 1A-30A Main line terminal rating is 100A 32VDC max, with M5 metric threaded studs Single line terminal rating is 30A 32VDC max, with M4 metric threaded studs Includes semi-transparent cover and 71 labels Terminals are nickel plated copper with stainless steel screws Installs with four #8 FH fasteners (not included) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SEA-DOG Sea-Dog Line carries quality marine gear such as Deck Hardware, Hinges, Lighting, Plumbing, Fishing Equipment, Clamcleats, Chain and Rigging Hardware and more.

ST Blade Compact Fuse Blocks - 8 Circuits w/Cover Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint. The single side design allows wire entry from one side to maximize space. Compact common source fuse block Accepts ATO® and ATC® fast acting blade fuses Single side entry wiring Ignition Protected-meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment Insulating cover meets ABYC/USCG insulation requirements Tin-plated copper buses and fuse clips Accepts ring or snap fork type terminals Small format standard and custom labels available Specifications Circuits:8 Maximum Amperage: 100A per block / 30A per circuit Maximum Voltage:32V DC Mounting: #8 Screw (M4) Screw Terminal Torque:#8-32 Screws with captive star lock washer in-lb (0 Nm) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.